1. Development of the pellet target in ITEP
M.Büscher, A.Gerasimov, V.Chernetsky, P.Fedorets, A.Dolgolenko, V.Balanutsa, L.Gusev, S.Mineev, S.Podchasky, I.Tarasenko, P.Balanutsa, V.Demekhin, S.Makagonov

2. Timelines for the test place in Moscow
2013
2014 Q1 Q2 Q3 Q4
Purchase of the equipment and manufacture details of target
Assembling of the target
Vacuum test
Cold test
Preparation stage for target in Moscow Q is finished:
test place, frame for target, water, light, power supply, pumping out lines, drawings, purchase of equipment, production of details, 3 PC for data taking and operation.
Assembling stage and vacuum tests Q Q are going on.

3. Assembling stage for target Q4 2013- Q2 2014
Already done:
Assembling of cryostat, installation of cryo-cooler, assembling full vacuum pumping system, temperature and pressure sensors are installed, leakage tests for cryostat and vacuum system (10-7 mbar), commissioning of cryo-cooler.
Recently done:
Gas supply system is assembled and tested for leakages.
New type of condenser is produced, assembled and tested for leakages
New generator
New skimmer
Going on:
Assembling of the internal parts.
The regular low temperature tests (without cooled gas) after installation of each internal part. Minimization of radiation heating. Maximization of transfer of the cooling power.
Installation of the new adjustment system.
Installation of the gas supply lines inside the cryostat.

4. Assembling stage for target Q4 2013- Q2 2014
Gas supply system

5. Assembling stage for target Q4 2013- Q2 2014
Installation of new adjustment system
Upper part of the system
New type of the condenser
Lower part of the system

6. Assembling stage for target Q4 2013- Q2 2014
New skimmer
Skimmer inlet with shielding
Skimmer outlet
New flange

7. Other activities and tests in Juelich
Investigation of glues and technologies for cryogenic usage for nozzles.
Tests of glues with first pellet target version in IKP.
Preliminary of results of tests:
Bad results for Stycast, promising results for UHU
Stycast
UHU

8. Other activities and tests in Juelich
Methods and constructions for production of extra thin jets and droplets (Ø ≤ 15 µm). Experimental studies in IKP.
Mini triple point chamber
Produced for tests in IKP in June 2014
mini triple point chambers
Generator with glued nozzle