1. Subject Name: Digital Switching Systems Subject Code:10EC82 Prepared By: Aparna.P, Farha Kowser Department: Electronics and Communication Date:
7/21/2018

2. UNIT 1 The development of Telecommunication

3. Introduction
Network Structures
Network services
Terminology, Regulation, Standards
Four -wire circuits
Digital Transmission
PDH, SDH

4. Introduction
Telecommunication networks carry information signals among entities, which are geographically far apart.
The future challenges are enormous as we anticipate rapid growth items of new services and number of users.
Telecommunication has evaluated and growth at an explosive rate in recent years and will undoubtedly continue to do so.

5. Network Topologies
Bus, ring, star, and other types of network topology In computer networking.
Topology refers to the layout of connected devices.
This article introduces the standard topologies of networking.
Topology in Network Design Think of a topology as a network's virtual shape or structure.
This shape does not necessarily correspond to the
Actual physical layout of the devices on the network.

6. Bus Topology : Bus networks (not to be confused with the system bus of a computer)
Use a common backbone to connect all devices. A single cable, the backbone functions as a shared communication medium that devices attach or tap into with an interface connector.

7. Ring Topology
In a ring network, every device has exactly two neighbors for communication purposes. All messages travel through a ring in the same direction (either "clockwise” or "counterclockwise").

8. Star Topology
Many home networks use the star topology. A star network features a central connection point called a "hub" that may be a hub, switch or router.
Devices typically connect to the hub with Unshielded Twisted Pair (UTP) Ethernet.

9. Mesh Topology
Mesh topologies involve the concept of routes. Unlike each of the previous topologies, messages sent on a mesh network can take any of several possible paths from source to destination.

11. Telecommunication Network
A telecommunications network consists of
Transmission systems
Switching systems
Stations

12. Transmission Systems Transmission (abbreviation: Tx):
is the process of sending and propagating an analogue or digital information signal over a physical point-to-point or point-to-multipoint transmission medium, either wired, optical fiber or wireless.
Transmission System:
is a system that transmits a signal from one place to another. The signal can be an electrical, optical or radio signal.
carries messages from an originating station to one or more distant stations.
is engineered and installed in sufficient quantity to provide a quality of service compatible with the cost and expected benefits.

13. Transmission Systems
Source
Destination
The source may be a simple telephone microphone, keyboard
The destination may be a simple telephone speaker, monitor
Source
Medium
Destination
It can be a single electrical medium, or a cascade of electrical media

14. Switching systems
Switching systems are an assembly of switching and control devices provided so that any station in a communications system may be connected as desired with any other station.
To enable the transmission facilities to be shared, stations are connected to and reached through switching system nodes that are part of most telecommunications networks.
Switching Systems act under built-in control to direct messages toward their ultimate destination or address.

15. High Availability Network Design Simplified Using Virtual Switching System

16. Network Structures HUB Hub1 User1 User2 User3 Hub2 User4 User5 User6
Ring Network N=1
Bus Network N=1
User1
User 2
User 3
User 4
Hub
User 1
User 2
User 3
User 4
User 5
Mesh Network N=1/2n(n-1)
Star Network N=n
Tree Network

17. Exchange
Solution can be provided by connecting a line from each user’s station to the central switching center/telephone exchange
a telephone exchange or telephone switch is a system of electronic components that connects telephone calls
Area with a single exchange
Area with several exchanges

18. Telecommunication networks hierarchy
A National Public Switched Telecommunication Network (PSTN) consists of:
Local network
connects customers’ station to their local exchanges.
These are also called subscribers’ distribution networks, customer access networks or the customer loop.
Junction networks
interconnects a group of local exchanges serving as area and a tandem or trunk exchange.
The trunk network or toll network
which provides long-distance circuits between local areas throughout the country. T L
Junction circuits
Junction Network
Multi exchange area.
L= Local Exchange
T=Tandem Exchange

19. National Telecommunication Network
Satellite Links and Submarine Cables
nodes
International Gateway Exchange
(Centre de Transit3)
International Network
National Tandem Exchanges
(tertiary trunk switching centres)
PBX
Trunk Network
Regional Tandem Exchanges
(Secondary trunk switching centres)
Core Network
Junction Network
Local Tandem Exchanges
(Primary trunk switching centres)
Local Exchanges
Local Network
Customer Lines

20. Elements of a Telecommunication Network
Transmission System
Switching System
Signaling system
Responsible for interchange of information
Which are made up by interconnecting
Customer nodes
Switching nodes
Transmission nodes
Service nodes

21. Network Services
Customers of a PTO may require different services which appear to require different networks. Examples include:
Public Switched Telephone Network (PSTN)
The Public Switched Telegraph Network (Telex)
Private Networks for voice and data
Radio networks providing mobile communication
Public data networks (PDN)
Special Service Networks

22. Transmission Bearer Network
Visual
PDN
Telex PC
PSTN
Loop
Customers are connected to transmission bearer network at their local exchange via the local access network or local loop.
The services provided over the telecommunication network can thus be divided into two categories:
Teleservices
Provision of the service depends on particular terminal apparatus ( e.g. telephone or tele-printer).
Bearer Services
Present the customer with transmission capacity that can be used for any desired function (e.g. private circuits)

23. Terminology North American British Customer’s Loop Local network
Access Network
Central office
Exchange
End Office
Local Exchange
Class 5 Office
Inter-office Trunk
Junction
Junctor
Trunk
Toll Office
Trunk Exchange
Toll network
Trunk Network

24. Four Wire Circuits
The amplifiers are used to compensate for the attenuation of a transmission path. These amplifiers are unidirectional so it is necessary to provide two channels for the go and return path. This can be achieved by using four-wire circuit.
At each end the four-wire circuit must be connected to a
two wire line leading to a telephone.
It consists of four wire/ two wire circuit to avoid singing.

25. Four–wire circuit block diagram

26. Frequency division multiplexing (FDM)
In telecommunications, frequency-division multiplexing (FDM) is a technique by which the total bandwidth available in a communication channel is divided into a series of non-overlapping frequency sub-bands, each of which is used to carry a separate signal.
The example of frequency-division multiplexing is radio and television broadcasting in which multiple radio signals at different frequencies pass through the air at the same time. Another example is cable television, in which many television channels are carried simultaneously on a single cable. FDM is also used by telephone systems to transmit multiple telephone calls through high capacity trunk lines.

27. FDM

28. Time division multiplexing (TDM)
Time-division multiplexing (TDM) is a method of transmitting and receiving independent signals over a common signal path by means of synchronized switches at each end of the transmission line so that each signal appears on the line only a fraction of time in an alternating pattern. This form of signal multiplexing was developed in telecommunications for telegraphy systems. Later applied to telephony systems.
Time-division multiplexing is used first for digital signals later it is applied to analog signals.
In TDM the time domain is divided into several time slots of fixed length, one for each sub-channel. sub-channel 1 is transmitted during time slot 1, sub-channel 2 during time slot 2 and etc..

29. Time division multiplexing (TDM)

30. Plesiochronous Digital Hierarchy(PDH)
The plesiochronous digital hierarchy (PDH) is a technology used in telecommunication to transport large quantities of data over digital transport equipment such as fiber optic and microwave radio systems.
PDH networks run in a state where different parts of the network are nearly, but not quite perfectly, synchronized.

31. Plesiochronous Digital Hierarchy(PDH)

32. Plesiochronous Digital Hierarchy(PDH)

33. PCM primary multiplex Group

34. Synchronous Digital Hierarchy (SDH)
Synchronous Digital Hierarchy (SDH) is a standardized protocol that transfer multiple digital bit streams synchronously over optical fiber using lasers or highly coherent light from light emitting diodes(LEDs). In USA this is called Synchronous optical network(SONET).

35. Synchronous Digital Hierarchy (SDH)