Download presentation
Presentation is loading. Please wait.
Published byLorin Morrison Modified over 6 years ago
1
Date of download: 11/8/2017 Copyright © ASME. All rights reserved. From: Influence of Changes in Pressure and Temperature of Supercritical Water on the Susceptibility to Stress Corrosion Cracking of 316L Austenitic Stainless Steel ASME J of Nuclear Rad Sci. 2016;3(1): doi: / Figure Legend: Geometry of the samples tested in SCW. (a) Samples used in the stress corrosion tests. (b) Samples used in the oxidation tests
2
Date of download: 11/8/2017 Copyright © ASME. All rights reserved. From: Influence of Changes in Pressure and Temperature of Supercritical Water on the Susceptibility to Stress Corrosion Cracking of 316L Austenitic Stainless Steel ASME J of Nuclear Rad Sci. 2016;3(1): doi: / Figure Legend: Stress–strain curves obtained after CERT tests in SCW at different pressures and temperatures
3
Date of download: 11/8/2017 Copyright © ASME. All rights reserved. From: Influence of Changes in Pressure and Temperature of Supercritical Water on the Susceptibility to Stress Corrosion Cracking of 316L Austenitic Stainless Steel ASME J of Nuclear Rad Sci. 2016;3(1): doi: / Figure Legend: Stress–strain curves for specimens strained in supercritical water up to failure at 400°C and 500°C/25 MPa/<10 ppb O2
4
Date of download: 11/8/2017 Copyright © ASME. All rights reserved. From: Influence of Changes in Pressure and Temperature of Supercritical Water on the Susceptibility to Stress Corrosion Cracking of 316L Austenitic Stainless Steel ASME J of Nuclear Rad Sci. 2016;3(1): doi: / Figure Legend: (a) Fracture surface of the specimen tested in supercritical water at 500°C/25 MPa/<10 ppb O2, granulated crack is highlighted. (b) The granulated crack at higher magnifications. (c) Fracture surface of the specimen tested in supercritical water at 400°C/25 MPa/<10 ppb O2. (d) An example of a crack found in the surface of a specimen tested in supercritical water (400°C/30 MPa/<10 ppb O2).
5
Date of download: 11/8/2017 Copyright © ASME. All rights reserved. From: Influence of Changes in Pressure and Temperature of Supercritical Water on the Susceptibility to Stress Corrosion Cracking of 316L Austenitic Stainless Steel ASME J of Nuclear Rad Sci. 2016;3(1): doi: / Figure Legend: Comparison between the microstructure obtained by EBSD before the test and the same surface after the test in supercritical water at 500°C/25 MPa/<10 ppb O2
6
Date of download: 11/8/2017 Copyright © ASME. All rights reserved. From: Influence of Changes in Pressure and Temperature of Supercritical Water on the Susceptibility to Stress Corrosion Cracking of 316L Austenitic Stainless Steel ASME J of Nuclear Rad Sci. 2016;3(1): doi: / Figure Legend: (a) Weight gains as a function of exposure time for the alloy 316L at 400°C/30 MPa with 8 ppm O2 and at 400°C/30 MPa in deaerated supercritical water. (b) SEM image of the surface of the specimen tested in supercritical water at 400°C/30 MPa/<10 ppb O2.
7
Date of download: 11/8/2017 Copyright © ASME. All rights reserved. From: Influence of Changes in Pressure and Temperature of Supercritical Water on the Susceptibility to Stress Corrosion Cracking of 316L Austenitic Stainless Steel ASME J of Nuclear Rad Sci. 2016;3(1): doi: / Figure Legend: Elemental composition profiles of oxide layers formed on the alloy 316L at (a) 400°C/30 MPa/<10 ppb O2 (528 hrs) and at (b) 400°C/30 MPa/8 ppm O2 (760 hrs)
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.