1. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining—Part I: Fabrication and Performance Evaluation
J. Micro Nano-Manuf. 2015;3(4): doi: /
Figure Legend:
Overall process flow for preferred methods of GOP production

2. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining—Part I: Fabrication and Performance Evaluation
J. Micro Nano-Manuf. 2015;3(4): doi: /
Figure Legend:
X-ray diffraction data of GO

3. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining—Part I: Fabrication and Performance Evaluation
J. Micro Nano-Manuf. 2015;3(4): doi: /
Figure Legend:
SEM images of GOPs: (a) TR500, (b) TR1050, and (c) US

4. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining—Part I: Fabrication and Performance Evaluation
J. Micro Nano-Manuf. 2015;3(4): doi: /
Figure Legend:
DLS data showing the statistical distribution of various GOP sizes: (a) TR500, (b) TR1050, and (c) US

5. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining—Part I: Fabrication and Performance Evaluation
J. Micro Nano-Manuf. 2015;3(4): doi: /
Figure Legend:
BET adsorption–desorption isotherms for TR GOP powders

6. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining—Part I: Fabrication and Performance Evaluation
J. Micro Nano-Manuf. 2015;3(4): doi: /
Figure Legend:
Experimental setup with inset showing thermocouple bead location [18]: (A) high-speed spindle, (B) workpiece, (C) Y-Z stage of machine, (D) CBN tool, (E) dynamometer, (F) X stage of machine, (G) cutting fluid dispensing syringe, and (H) thermocouple

7. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining—Part I: Fabrication and Performance Evaluation
J. Micro Nano-Manuf. 2015;3(4): doi: /
Figure Legend:
Cutting temperature and cutting force trends seen for the GOP colloidal solutions (note: thermocouple measurements have a repeatability of ±0.1 °C and dry cutting conditions gave a temperature rise of 35 °C): (a) percent difference in maximum temperature rise compared to baseline cutting fluid and (b) resultant cutting force trends

8. Date of download: 11/8/2017
Copyright © ASME. All rights reserved.
From: Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining—Part I: Fabrication and Performance Evaluation
J. Micro Nano-Manuf. 2015;3(4): doi: /
Figure Legend:
Surface roughness trends seen for GOP colloidal solutions