1. -Manor http://www.manorenterprises.com

2.  Introduction:  About us  What is a Heat Pipe?  Operation of Heat Pipe  Hot Gas to Air Heat Pipe Heat Exchanger  Hot Gas to Liquid Heat Pipe Heat Exchanger  Heat Pipe Panel Cooler (HPPC)  Heat Pipe Dehumidifier (HPD)  Application on Heat Pipe: http://www.manorenterprises.com

3.  About us:  MANOR, a Seventeen year's young organization, headed by a group of technocrats, emerged with a vital directive of presenting state of the art products and services in the field of Energy Savings. We are glad as manufacturers of Energy saving equipment's such as Heat Pipe Heat Recovery System, Desuperheaters and Econet Systems.Desuperheaters  Manor is a part of MANIK Group. The group consists of Manik Engineers which is a well known brand for Refrigeration Controls, serving in many industries for the past 30 years in India and "MANIKS", the number brand in India for Dust Collector Pulse Solenoid Valves and timers. http://www.manorenterprises.com

4.  What is a Heat Pipe? A heat pipe heat exchanger is a simple device which is used to transfer heat from one location to another, using an evaporation-condensation cycle. Heat pipes are referred to as “superconductors” of heat due to their fast transfer capability with low heat loss. It is a self- contained passive energy recovery device. A heat pipe can transfer up to 1000 times more thermal energy, than copper, the best known conductor; that too with less than 57℃/meter temperature drop. One of the well known features of the heat pipes is that they do not have any moving parts and hence require minimum maintenance. They are completely reversible and silent in operation and do not require any external energy other than the thermal energy. Heat pipes are ruggedly built and can bear a lot of abuse.heat pipe heat exchanger

5. http://www.manorenterprises.com Heat Pipe:

6.  Operation of Heat Pipe: Hollow cylinder filled with a vaporizable liquid under vacuum. The Heat Pipe functions as follows  Heat is absorbed in the evaporating section.  Fluid boils to vapor phase.  Heat is taken away from the upper part of cylinder to the environment; then vapor condenses to liquid phase.  Liquid returns by gravity force to the lower part of cylinder (i.e. evaporating section).  When heat is added to the evaporator section, the working fluid is boiled and converted into vapor absorbing latent heat. http://www.manorenterprises.com

7.  Hot Gas to Air Heat Pipe Heat Exchanger: Typical finned Hot Gas to air Heat Pipe heat exchangers comprise of number of tubular gravity assisted finned Heat Pipes arranged in staggered pitch, depending upon the application. One of the advantages of the Heat Pipe Heat Exchanger is its ability to operate without cross contamination between the two streams. Use of Gravity Assisted Heat Pipe complies orientation evaporator above condenser for the Heat Pipe Heat Exchanger. http://www.manorenterprises.com

8.  Hot Gas to Liquid Heat Pipe Heat Exchanger:  This heat exchanger resembles Air to Air unit, only difference is liquid/water tank is provided at the condensation section to preheat liquid / water.  Manor heat pipe heat exchanger can recover up to 85% of exhausted thermal energy. However under ideal conditions the thermal efficiency of an economic system ranges between 55 to 70% and saves millions of BTUs year after year. Manor http://www.manorenterprises.com

9.  Heat Pipe Panel Cooler (HPPC): Electrical and electronics control panels are normally made air tight to protect costly electronic and electrical components from dust. Inside components get overheated which leads to failure or mal-function. Control panel coolers extract heat from inside the panel without disturbing inside environment of panel. http://www.manorenterprises.com

10.  Heat Pipe Dehumidifier (HPD):  In an air conditioning system, additional moisture is condensed out, as the air becomes colder and colder. The heat pipe is designed to have one section in the warm incoming stream and the other in the cold outgoing stream. By transferring the heat from the warm return/incoming air to the cold outgoing supply air, the heat pipes create the double effect of pre-cooling the air before it goes to the evaporator and then re-heating it immediately. This lowers the cooling load, evaporating temperature and heating load. http://www.manorenterprises.com

11.  Activated by temperature difference and therefore consuming no energy, the heat pipe, due to its pre-cooling effect, allows the evaporator coil to operate at a lower temperature, increasing the moisture removal capability of the air conditioning system by 50-100%. http://www.manorenterprises.com

12.  Application on Heat Pipe:  Waste Heat Recovery from Air Conditioners  Heat Pipe Air Pre-heater for Boilers  Waste Heat Boilers to Recovery Heat  Heat Recovery at the Kiln Furnace  Spray Drying http://www.manorenterprises.com