1. N. Blaskovic, T. Bromwich & G. Christian
ATF to-do list
N. Blaskovic, T. Bromwich & G. Christian
N. Blaskovic
FONT Meeting

2. Contents On-shift to-do list Multi-board data synchronisation
Hardware and cable wish list
N. Blaskovic
FONT Meeting

3. To-do list
Introduce delay cables after cavity to see if static erratic feature changes
Diagnose IP BPM phase sensitivity
Vary incoming LO phase
Synchronously digitise bunch phase measured at stripline BPMs
Once available, do IPC beamline tests
N. Blaskovic
FONT Meeting

4. Board synchronisation: option 1
Use FONT5 + FONT5A boards
Run Doug’s ATF 2-board DAQ
Observations:
Empirically approximately synchronous
Readbacks not available for FONT5A board
SIS digitiser and ATF GUI not used
N. Blaskovic
FONT Meeting

5. Board synchronisation: option 2
Use FONT5A board + SIS digitiser
Run standalone DAQ for FONT5A board
Issue synchronisation signal upstream
Observations:
Integrates SIS digitiser operation
Board synchronisation ensured
Requires synchronisation signal to be sent to the IP and readback issued to Epics (Doug?)
Requires ATF to save FONT Epics data
N. Blaskovic
FONT Meeting

6. Wish list 2 ZPULs (to replace broken ones)
Mechanical LO phase shifter (slide 3)
BNC-BNC cables
3 meter long
SMA-SMA cables
Long cables to delay cavity signals (slide 3)
SMA-BNC connectors
N. Blaskovic
FONT Meeting