1. Wireless Relay
HDL-MPR02-RF.18

2. Description
HDL-MPR02-RF.18 Wireless Relay, has 4CH dry contact, can control target by switch. This module should be configured by wireless gateway.

3. Connection
1. Programming button: if it is working fine, the green light will flicker, press the button three times continuously within 3s, and then the LED will flash quickly.
2. Press the ‘PROG’ button 3 times continuously within 3s in the Wireless Gateway, the LED of the Wireless Gateway will flash quickly in red, indicating it is ready to broadcast its Wireless parameters (Frequency & Password) to the Wireless Dimmer.
3. The LED of Wireless Relay will be off automatically, and then, press ‘PROG’ button of Wireless Gateway again. L N
Dry contact
Programming button
Antenna

4. Channel Name: Do the Remark for easy management.
Open delay: When receives the on command, will not switch on immediately but after the delay time.
Close delay: When receives the off command, will not switch off immediately but after the delay time.
Protect delay: If a protection delay of 1 minute is set, and the relay channel is turned off, it cannot be turned on again until 1 minute later. This is useful for loads which are not suitable to be rapidly turned on and off.
7/29/2018

5. Configuration
You can use the panel to control the wireless relay channel.

6. Dry Contact
The Wireless Dimmer has 4 channels dry contact.

7. Dry Contact Switch type:
Two different Switch types - Momentary and Toggle
a) Momentary Switch - When pressed, it is on, when released, it is off.
Generally select ‘signal on; signal on/off; combination on/off; etc..’
b) Toggle Switch – It is bi-stable switch, you can set it on or off.
Generally select “Mechanic switch” mode for this kind of switch. a) b)

8. Dry Contact Unqualifiedde: Set the dimming mode for each channel.
Set the dimming value for each channel:
7/29/2018

9. Dry Contact Setting for keys:
Key Enable: enable/disable the input channels.
Panel Lock Key Enable: If be selected, can use panel to lock/unlock this channel. .
7/29/2018

10. Dry Contact
Target:
Can set each channel’s targets, the target’s range is 1~99.
7/29/2018