1. P1 P2 P3 Wire #1 Wire #2 Wire #3a Wire #3b Wire #4 Wire #5 Wire #6
D38999/26WB35PN Front Release P2
MS3476W22-41P Rear Release P3
Molex Plug
M39029/ ga pin
M39029/ ga pin
MS39029/ ga pin
ga Molex Socket
M81714/ Splice
Environmental Splice
MS Ring Terminal
Heat Shrink Tubing
22ga Shielded Pair wire
20ga wire
16ga wire
Solder Zap
Lacing Twine
Zip Tie
Use Small Daniels (AFM8) for wires 1, 3b, 4, 5, 6, 7
Use Large Daniels (AF8) for wires 2, 3a
Prepare and Ground Shield to Backshell with Ring Terminal
Terminate Shield with Heat Shrink Tubing
Perform Environmental Splice
Bundle overall length without Plugs to be 14” +/- 2” P1 P2 5
Wire #1 # #
22ga shielded # # 3
16ga
Wire #2 4 # #
16ga
Wire #3a
Wire #3b # 5
20ga
Wire #4
20ga P3 # # #
20ga
Wire #5 # # #
20ga
Wire #6 #
Wire #7 # #
22ga shielded # # 3 4
Wire Bundle

2. Tools Required AFM8 Crimper - Daniels Positioner for AFM8 AF8
Crimper Molex
Heat Gun
Screwdriver
Wire Stripper
Zip tie gun
Side Cutters
Continuity Meter
Insertion Tool - Daniels
Removal Tool - Daniels
Insertion Tool - Molex
Removal Tool - Molex
Wire Bundle

3. Unless otherwise noted, this work is licensed under the Creative Commons Attribution 3.0 Unported License. To view a copy of this license, visit
This product was funded by a grant awarded by the U.S. Department of Labor’s Employment and Training Administration. The product was created by the grantee and does not necessarily reflect the official position of the U.S. Department of Labor. The Department of Labor makes no guarantees, warranties, or assurances of any kind, express or implied, with respect to such information, including any information on linked sites and including, but not limited to, accuracy of the information or its completeness, timeliness, usefulness, adequacy, continued availability, or ownership. Equal Opportunity Program.