1. Solar Charge Controllers

2. DESCRIPTION
PV Charge Controller is designed for use with all types of pv panels and different types of batteries such as wet or sealed lead acid, lead calcium, lead antimony battery
User Adjustable Charge Control Settings for different types of batteries
Informative LCD Display and Tri-Color LED indication of system and battery conditions

3. 3 STAGES OF CHARGE CYCLE
 BULK :  During this phase the voltage gradually rises to the Bulk level while the batteries draw maximum current.
 ABSORPTION :  During this phase the voltage is maintained at Bulk voltage level for a specified time while the current gradually tapers off as the batteries charge up.
 FLOAT :  After the absorption time passes the voltage is lowered to float level and the batteries draw a small maintenance current until the next cycle.

4. WORKING PRINCIPLE

5. DETAILED STRUCTURE

6. CIRCUITRY VIEW

7. USES Prevents battery overcharge Blocks reverse current
Prevent over-discharge from
batteries (some models)
Prevent electrical overload (some models)
Displays battery status
Medors.in

8. PROS AND CONS PROS Short-Circuit Protection at load terminal
Optimal temperature Sensor for compensated battery charging
Overcharge and Over-discharge Protection,
Over Temperature Protection
User Adjustable Low Voltage Disconnect and Low Voltage Reconnect

9. CONS Equalization Charging is only for Wet-type Lead Acid Battery
Automatic Equalization charge is only available when battery voltage is higher than the Low Voltage Disconnect (LVD)
 No disconnection from the battery should ever occur. 

10. THANK YOU