1. Asahi/America
Electric Actuators
Series 94

2. SERIES 94 MANUAL OVERRIDE ZYTEL FR 50 HOUSING
THERMALLY PROTECTED MOTOR
16 POINT
Nema 4x is weatherproof and corrosion resistant.
ISO bolt circle offers flexibility in mounting, minimal components needed.
Heat treated gear assures long life.
Duty circle is ratio of run time to cool-down time.
Visual beacon indication visible at long distance.
Manual override allows valve to be cycled in the event of power loss.
16 point terminal strip allows all accessories to be pre-wired for easy
installation.
TERMINAL STRIP
NEMA IVX ENCLOSURE

3. Series 94 Electric Actuators
Asahi/America
Series 94 Electric Actuators
Standard Features:
Reversing Motor
5 second Cycle Time per 90º
Limit Switches
Thermal Overload Protection with Automatic Reset
Permanently Lubricated Gear Train
Compact Design
Actuator operates counterclockwise - open, clockwise - close.
Speed can be slowed with a cycle length control but not increased.
Limit switches have auxiliary contacts for light indication.
Cut-out occurs when motor windings reach 300º F. Reset is automatic.
Gear Train needs no preventative maintenance.

4. Series 94 Electric Actuators
Asahi/America
Series 94 Electric Actuators
Unique Features:
Nema 4x with Stainless Steel Trim
C E Compliable (115vac & 220vac)
ISO Bolt Circle
Heat Treated, Hardened Spur Gear
100% Duty Cycle
Position Indicator / Manual Override
16 Point Terminal Strip
Nema 4x is weatherproof and corrosion resistant.
ISO bolt circle offers flexibility in mounting, minimal components needed.
Heat treated gear assures long life.
Duty circle is ratio of run time to cool-down time.
Visual beacon indication visible at long distance.
Manual override allows valve to be cycled in the event of power loss.
16 point terminal strip allows all accessories to be pre-wired for easy
installation.

5. Series 94 Electric Actuators
Asahi/America
Series 94 Electric Actuators
Total Flexibility:
Ball Valves & Multiports: ½” - 3”,
Butterfly Valves:11/2”-4”
Various Voltages
Additional Limit Switches
Feedback Potentiometer
Two Wire Control
Extended Cycle Times
180º Center Off Kit
Mechanical Brake
Heater & Thermostat
Electronic Positioner
Fail-safe Battery Backup
Extra limit switches are use to sequence other equipment i.e. pumps, compressors, mixers, etc.
Feedback potentiometer used to monitor valve position from remote panel.
Two wire control used to retro fit solenoids or direct wire timers and switches.
Cycle times can be slowed to ten minutes either open or close.
12, 24 Vdc 12, 24, 220 Vac (220 Vac is 50 Hz only)
Center off kit provides a third position for multiport valves.
Mechanical brake locks gears and shaft at the end of travel eliminating oscillation.
Heater & thermostat maintains constant temperature in actuator housing in cold environments.
Electronic positioner accepts instrumentation signal to accurately position valve opening.
Fail-safe battery provides fail position of valve upon loss of power.

6. Series 94 Vs the Competition
Asahi/America
Series 94 Vs the Competition
Enclosure: Plastic cover, aluminum base
25% duty cycle only
Plastic parts in gear train
Manual override does not de-clutch
Crude sand casting
Cadmium-plated trim easily corroded, epoxy coating available as an option
Problems due to incorrect gear alignment
Multiple vendors necessary for technical support

7. Series 94 Electric Actuators
Asahi/America
Series 94 Electric Actuators
Engineering Specifications:
Models: A94, B94
Output Torque: in-lbs..
Voltage: 120 Vac 50/60 Hz
Current Draw: .75 Amps (LR)
Duty Cycle A %,B-94-75%
Motor Thermally Protected
CE Compliable
A full specification is available in the handout.

8. Series 94 Electric Actuators
Asahi/America
Series 94 Electric Actuators
Engineering Specifications
Conduit Entry: ½” NPT, Quantity of 2
Enclosure Nema 4X
Max. Temperature: º F
Switches: Two SPDT (15 amps)
Cycle Time: seconds / 90º
Bolt Circle ISO
Manual Override Declutchable
A full specification is available in the handout.