Presentation is loading. Please wait.

Presentation is loading. Please wait.

WF on NB-IoT Radio Link Monitoring Performance Test Procedure

Similar presentations


Presentation on theme: "WF on NB-IoT Radio Link Monitoring Performance Test Procedure"— Presentation transcript:

1 WF on NB-IoT Radio Link Monitoring Performance Test Procedure
R4-79AH-0262 3GPP TSG-RAN WG4 #79-AH Hong Kong, 28th – 30th June, 2016 WF on NB-IoT Radio Link Monitoring Performance Test Procedure Qualcomm Incorporated, …

2 Background In RAN4#79, RAN4 discussed RLM test procedure
The legacy RLM tests have an SNR variation as shown in figure below Periodic CQI transmission on UL is used to test UE IS/OOS behaviour

3 NB-IoT RLM Test Proposal
Proposed SNR variation for OOS testing for RLM SNR1 SNR3 T1 A T2 B T3 C D

4 NB-IoT RLM Test Proposal
OOS Proposed Test Procedure The UE behaviour in each test during time durations T1, T2, T3 shall be as follows: During the period up to time point A, eNB shall provide the UE with a UL grant UE is expected to decode the UL grant, switch to UL, and complete the UL transmission UE switches back to DL During the period from time point A to time point B, SNR shall be linearly decreases from SNR 1 to SNR 3 During the period from time point B to time point D, Option 1 The above 3 steps are repeated ‘[10]’ times to ensure UE decoded NPDCCH at least once during T3 Option 2 UE initiates RRC-re-establishment procedure after T310 expires during T3 The UE shall stop transmitting uplink signal no later than time point C and continues to keep its transmitter off until point D

5 NB-IoT RLM Test Proposal
Test Requirements(cont’d) The UE shall stop transmitting uplink signal at least in all sub frames configured for UL transmission according to the configured UL grant no later than time point D ([TBD] ms after the start of time duration T3). The rate of correct events observed during repeated tests shall be at least 90%

6 NB-IoT RLM Test Proposal
Proposed SNR variation for IS testing for RLM SNR1 SNR3 A T1 B T2 C T3 D

7 NB-IoT RLM Test Proposal
IS Proposed Test Procedure The UE behaviour in each test during time durations T1, T2, T3 shall be as follows: During the period up to time point B, Option 1 eNB shall provide the UE with a UL grant UE is expected to decode the UL grant, UE switches back to DL The above 3 steps are repeated ‘[10]’ times to ensure UE decoded NPDCCH at least once during T3 Option 2 UE initiates RRC-re-establishment procedure after T310 expires during T3 The UE shall stop transmitting uplink signal no later than time point C and continues to keep its transmitter off until point D During the period from time point B to time point C, SNR shall be linearly increases from SNR 1 to SNR 3 During the period from time point C to time point D, switch to UL, and complete the UL transmission

8 NB-IoT RLM Test Proposal
Test Requirements(cont’d) The UE shall start transmitting uplink signal at least in all sub frames configured for UL transmission according to the configured UL grant no later than time point D ([TBD] ms after the start of time duration T3) The rate of correct events observed during repeated tests shall be at least 90%


Download ppt "WF on NB-IoT Radio Link Monitoring Performance Test Procedure"

Similar presentations


Ads by Google