1. Date of download: 11/12/2017
Copyright © ASME. All rights reserved.
From: The Role of Strain Rate Response on Tribological Behavior of Metals
J. Tribol. 2012;135(1): doi: /
Figure Legend:
3D profiles of steel flats that are (a) Uni-directionally ground, (b) 8-Ground and (c) Randomly polished

2. Date of download: 11/12/2017
Copyright © ASME. All rights reserved.
From: The Role of Strain Rate Response on Tribological Behavior of Metals
J. Tribol. 2012;135(1): doi: /
Figure Legend:
Schematic diagram of the inclined pin-on-plate sliding tester

3. Date of download: 11/12/2017
Copyright © ASME. All rights reserved.
From: The Role of Strain Rate Response on Tribological Behavior of Metals
J. Tribol. 2012;135(1): doi: /
Figure Legend:
(a) Variation of forces and coefficient of friction with sliding distance for pure Ti (b) Variation in the coefficient of friction with sliding distance for differing roughness under dry and lubricated conditions. Here, sliding direction is perpendicular to unidirectional grinding marks. (c) Variation of average coefficient of friction and surface roughness (Ra) with surface texture for pure Ti and (d) Variation of average coefficient of friction and surface roughness (Ra) with surface texture for pure Fe. In panels (c) and (d), U-PD and U-PL represents sliding direction perpendicular and parallel to the unidirectional grinding marks, respectively. The error bars in the figures (c) and (d) indicate the maximum and minimum values of the friction for the five surface roughness values tested.

4. Date of download: 11/12/2017
Copyright © ASME. All rights reserved.
From: The Role of Strain Rate Response on Tribological Behavior of Metals
J. Tribol. 2012;135(1): doi: /
Figure Legend:
Scanning electron micrographs of steel flats with different textures for the case of (a) Ti and (b) Fe under dry and lubricated conditions. The arrows indicate the sliding direction of the pin relative to the flat.

5. Date of download: 11/12/2017
Copyright © ASME. All rights reserved.
From: The Role of Strain Rate Response on Tribological Behavior of Metals
J. Tribol. 2012;135(1): doi: /
Figure Legend:
Optical micrographs of Ti when compressed at the strain rates of (a) 100 s−1 and (b) 0.1 s−1 [17]

6. Date of download: 11/12/2017
Copyright © ASME. All rights reserved.
From: The Role of Strain Rate Response on Tribological Behavior of Metals
J. Tribol. 2012;135(1): doi: /
Figure Legend:
Optical micrographs of Fe when compressed at the strain rates of (a) 100 s−1 and (b) 0.01 s−1

7. Date of download: 11/12/2017
Copyright © ASME. All rights reserved.
From: The Role of Strain Rate Response on Tribological Behavior of Metals
J. Tribol. 2012;135(1): doi: /
Figure Legend:
3D profiles of steel flats tested using Ti pins ((a) and (b)) and Fe pins ((c) and (d)) under dry conditions