1. Insertion of Jaydess

2. IUD
Insertion tube
flange
slider
plunger
plunger

3. Position flange to the length of the uterus as measured by the sound

4. Load the IUD into the insertion tube by pushing the slider up

5. Partially insert the tube until the flange is about 2 cm from the os

6. Partially release the IUD by sliding the slider down to the mark
Partially release the IUD by sliding the slider down to the mark. (it clicks)

7. Fully insert the IUD by pushing the insertion tube up to the fundus

8. Release IUD by sliding the slider down to the bottom

9. Withdraw the insertion tube

10. Cut string