1. [EVM Setting]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
CD = High
CD = Low

2. [1.Normal case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
1. Battery Only
 CD High
 Status = Ready

3. [1.Normal case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
2. VIN 5V is inserted
 CD High->Low
 Status = Charging in Progress

4. [1.Normal case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
3. VIN 5V is removed
 CD Low-> High
 Status = Ready

5. [1.Normal case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
4. EN_SHIPMODE
 Power Off
Power Off by SHIPMODE

6. [2.VIN DPM normal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
1. Battery Only
 CD High
 Status = Ready

7. [2.VIN DPM normal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
2. VIN 5V is inserted
 CD High-> Low
 Status = Charging in Progress

8. [2.VIN DPM normal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
3. VIN 5V -> 4.5V
CD Low
VINDPM = Actice
 Status = Fault

9. [2.VIN DPM normal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
4. VIN 4.5V is removed
CD Low -> High
VINDPM = Inactive
 Status = Ready

10. [2.VIN DPM normal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
5. EN_SHIPMODE
 Power Off
Power Off by SHIPMODE

11. [3.VIN =4.5V abnormal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
1. Battery Only
 CD High
 Status = Ready

12. [3.VIN =4.5V abnormal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
2. VIN = 4.5V is inserted
 CD High
Status = Fault
VINDPM = Active

13. [3.VIN =4.5V abnormal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
3. VIN = 4.5V is inserted
 CD High => Low
Status = Fault
VINDPM = Active

14. [3.VIN =4.5V abnormal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
4. VIN = 4.5V is removed
 CD Low
Status = Fault
VINDPM = Active
VIN is not present, but VINDPM is active

15. [3.VIN =4.5V abnormal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
5. VIN = 4.5V is removed
 CD Low -> High
Status = Fault
VINDPM = Active
VIN is not present, but VINDPM is active

16. [3.VIN =4.5V abnormal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
6. EN_SHIPMODE
SHIPMODE bit set 1
But Device is connected to host and power is not off
SHIPMODE is not working

17. [4.VIN 4.2V abnormal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
1. Battery Only
 CD High
Status = Ready
VINDPM = Disable

18. [4.VIN 4.2V abnormal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
2. VIN = 4.2V in inserted
 CD High
Status = Ready
VINDPM = Disable (so VINDPM status is inactive)
VIN_UV = Normal (because VIN = 4.2V is inserted)

19. [4.VIN 4.2V abnormal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
3. VIN = 4.2V in inserted
 CD High => Low
Status = Ready
VINDPM = Disable (so VINDPM status is inactive)
VIN_UV = Normal (because VIN = 4.2V is inserted)

20. [4.VIN 4.2V abnormal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
4. VIN = 4.2V in removed
 CD Low
Status = Ready
VINDPM = Disable (so VINDPM status is inactive)
VIN_UV = Fault (because VIN = 4.2V is removed)

21. [4.VIN 4.2V abnormal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
5. VIN = 4.2V in removed
 CD low -> High
Status = Ready
VINDPM = Disable (so VINDPM status is inactive)
VIN_UV = Fault (because VIN = 4.2V is removed)

22. [4.VIN 4.2V abnormal Case]
[ Condition ]
Setting : Default
Battery Voltage : 3.8V~3.9V
6. EN_SHIPMODE
SHIPMODE bit set 1
But Device is connected to Host and power is not off
SHIPMODE is not working