Presentation is loading. Please wait.

Presentation is loading. Please wait.

High Radiation to Materials 16th Project Team Meeting – May 20, 2010

Published byDarleen McDonald Modified over 6 years ago

Similar presentations

Presentation on theme: "High Radiation to Materials 16th Project Team Meeting – May 20, 2010"— Presentation transcript:

1 High Radiation to Materials 16th Project Team Meeting – May 20, 2010
News Accelerator schedule Report from LMC, MSWG meeting Budget situation Press articles I. Efthymiopoulos – EN/MEF Project Team Meeting CERN, July 8, 2010 EDMS No:

2 HiRadMat project Very challenging !!! Very challenging !!!
Master schedule Very challenging !!! Very challenging !!! I. Efthymiopoulos 16PT, July 8,2010

3 HiRadMat project Mike Lamont’s talk @ IEFC June 25th
2011 LHC schedule Mike Lamont’s IEFC June 25th Possible access to BA7 until week 7(8)? Remain with present schedule until week-6 (end of January) Consider any additional week as contingency I. Efthymiopoulos 16PT, July 8,2010

4 Presentation to MSWG Christoph : Primary Beam Ilias : operations
More info: I. Efthymiopoulos 16PT, July 8,2010

5 Preparation & Assembly area
HiRadMat Project Irradiation cycles for tests Life cycle of a test setup: Prepare 1(2) test setups, each on is platform in the lab or assembly area Move them to the irradiation area – do the irradiations ; swap between the two remotely (either base platform movement or move the equipment/jaws) Move them to the cool-down area Recuperate them later for inspection/analysis in the lab A Preparation & Assembly area B C Irradiation area (2 stands) Cool-down area I. Efthymiopoulos 16PT, July 8,2010

6 HiRadMat – Operations Beam conditions
HiRadMat uses the existing SPS extraction to TI2/LHC i.e. can receive all beams (already) available and prepared for LHC from pilot to full intensity Beam parameters to vary for the experiments: Bunch intensity: [5×109(pilot) ÷ 1.1(1.7) ×1011] ppb Number of bunches : [1 (pilot) ÷ 288 (bunch trains)] Timing between bunches or bunch trains: [SPS filling modes possibilities] Beam focusing at the experiment : [0.25 ÷ 4.0 ] mm2 HiRadMat beam control will use the existing tools of SPS and TI2 line Minor modifications to add the new TT66 line equipment Each beam pulse will be on request : single (next sc) or multiple (next N sc) Beam interlock: During extraction to TI2/LHC access to BA7 will be prohibited (as today) During extraction to TI2/HRM access to BA7 will be prohibited new beam dump in TI2 to allow access to LHC while HRM receives beam during tests/beam setup the beam is dumped in the HRM dump (ex. T9 target) – experiments retracted I. Efthymiopoulos 16PT, July 8,2010

7 HRM – Operations Beam time Preparation – setting up: Data - taking:
Use an HRM-short cycle equivalent to the present LHC cycle (440 GeV instead of 450 GeV) Can be added in the SPS super cycle, runs in // to FT and CNGS Extract few low intensity pulses to verify beam optics and test setup alignment Data - taking: Low-med intensity: beam pulses up to 72 bunches can be done using the HRM-short cycle High-intensity : beam pulses >72 bunches require a dedicated HRM-long cycle (~20 sec) would be a similar configuration as LHC filling could run in // to FT or CNGS (such to maintain a total super-cycle length <50 sec) Up to 100 high-intensity pulses per experiment – 10 experiments/year Typical user: 10 pulses × 10 times within 4 hours  40 hours/year of high-intensity running The dedicated running of SPS for HiRadMat will be included in the yearly schedule Deadline for beam requests by September 1st , YYYY for the operation of the SPS year YYYY+1 Prepare and install the experiments during the winter shutdown Swap experiments (remotely) during LHC machine stops Document for the management in preparation…. (September RB?) Details for the operations and contact/handling of the users still to clarify… I. Efthymiopoulos 16PT, July 8,2010

8 HiRadMat Operations Feedback from discussions:
Machine Studies Working Group – MSWG Feedback from discussions: User selection and beam pulse list must be discussed with experts The time required to setup the machines (PS & SPS) to the different configurations must be included in the yearly schedule NOT in the MD budget The operation mode for HiRadMat should be described in a document to be circulated and apporved Should be submitted to the RB in September to allow including HiRadMat in the 2011 schedule User Selection Panel to create  next PT meeting I. Efthymiopoulos 16PT, July 8,2010

9 HiRadMat Project HiRadMat in the news!!!! EUCARD Newsletter
Press articles HiRadMat in the news!!!! EUCARD Newsletter ue05/article1.html In preparation: news article for CERN courier September issue I. Efthymiopoulos 16PT, July 8,2010

Download ppt "High Radiation to Materials 16th Project Team Meeting – May 20, 2010"

Similar presentations

Accelerator Complex Status P. Collier. Linac2, Booster and PS Startup on-time, according to the schedule. Only minor problems Rapidly set-up the major.

Accelerator Complex Status P. Collier. Linac2, Booster and PS Startup on-time, according to the schedule. Only minor problems Rapidly set-up the major.
1 Commissioning ABT Equipment in the LHC Jan Uythoven ABT TCM 13/01/2015.

1 Commissioning ABT Equipment in the LHC Jan Uythoven ABT TCM 13/01/2015.
Accelerator Schedules 2015 2015 LHC and LHC Injectors Schedules MSWG meeting 16 January 2015 SPSC - 13 January 2015 Rende Steerenberg, BE/OP2 Rende Steerenberg,

Accelerator Schedules LHC and LHC Injectors Schedules MSWG meeting 16 January 2015 SPSC - 13 January 2015 Rende Steerenberg, BE/OP2 Rende Steerenberg,
MERcury Intense Target (MERIT) Experiment – or nTOF-11 Mercury System Safety Review Ilias Efthymiopoulos Adrian Fabich (CERN - AB-ATB-EA) Hg-system Safety.

MERcury Intense Target (MERIT) Experiment – or nTOF-11 Mercury System Safety Review Ilias Efthymiopoulos Adrian Fabich (CERN - AB-ATB-EA) Hg-system Safety.
Prepare DORIS for particle physics again F.Brinker, DESY, March 31 st 2008 Injector chain to Doris and Petra Situation at the IP-region Beam optic Work.

Prepare DORIS for particle physics again F.Brinker, DESY, March 31 st 2008 Injector chain to Doris and Petra Situation at the IP-region Beam optic Work.
HIRADMAT IN THE WANF TUNNEL I. E FTHYMIOPOULOS, EN/MEF  HIRADMAT-Exp.Area Working Group  EN/MEF : I. Efthymiopoulos, A. Pardons, M.Lazzaroni, N. Gilbert.

HIRADMAT IN THE WANF TUNNEL I. E FTHYMIOPOULOS, EN/MEF  HIRADMAT-Exp.Area Working Group  EN/MEF : I. Efthymiopoulos, A. Pardons, M.Lazzaroni, N. Gilbert.
Timing Issue for Mercury Target 2006. 6. 14 Hee Jin Park (SUNY Stonybrook, BNL) Ilias Efthymiopoulos (CERN) Adrian Fabich (CERN)

Timing Issue for Mercury Target Hee Jin Park (SUNY Stonybrook, BNL) Ilias Efthymiopoulos (CERN) Adrian Fabich (CERN)
Feedback from MEF  Only possible, if COMMON COORDINATION MEETINGS  Main possible conflict: SAFETY –No “work permits” in the injectors. MEF working on.

Feedback from MEF  Only possible, if COMMON COORDINATION MEETINGS  Main possible conflict: SAFETY –No “work permits” in the injectors. MEF working on.
 A brief history of time  In the years BC.  My years at CERN  Current position  What is a Technical Coordinator?  The different type of intervention.

 A brief history of time  In the years BC.  My years at CERN  Current position  What is a Technical Coordinator?  The different type of intervention.
1 Interlock logic for LHC injection: intensity limitations Jörg Wenninger AB-OP-SPS Outcome of the join Machine-Experiments Workshop on Machine Protection.

1 Interlock logic for LHC injection: intensity limitations Jörg Wenninger AB-OP-SPS Outcome of the join Machine-Experiments Workshop on Machine Protection.
IEFC WS 21-24 March 2011 Middle-Long Term Needs for Ion Beams S. Maury 111 Middle-Long Term Needs for Ion Beams S.Maury Thanks to T. Bohl, C. Carli, D.

IEFC WS March 2011 Middle-Long Term Needs for Ion Beams S. Maury 111 Middle-Long Term Needs for Ion Beams S.Maury Thanks to T. Bohl, C. Carli, D.
ECRs and ES for the LHC Last presentation on the 26 th of August 2015 (LMC 232) S. Chemli for EN-MEF-DC LMC xxx.

ECRs and ES for the LHC Last presentation on the 26 th of August 2015 (LMC 232) S. Chemli for EN-MEF-DC LMC xxx.
Machine development - results and plans – critical results, what’s to be done? R. Assmann 15/07/2011 R. Assmann for the LHC MD coordination team (R. Assmann,

Machine development - results and plans – critical results, what’s to be done? R. Assmann 15/07/2011 R. Assmann for the LHC MD coordination team (R. Assmann,
The Stripping Foil Test Stand in the Linac4 Transfer Line

The Stripping Foil Test Stand in the Linac4 Transfer Line
HiRadMat – Users Meeting 6/2/2015 Adrian Fabich EuCARD-2 is co-funded by the partners and the European Commission under Capacities 7th Framework Programme,

HiRadMat – Users Meeting 6/2/2015 Adrian Fabich EuCARD-2 is co-funded by the partners and the European Commission under Capacities 7th Framework Programme,
LHC Progress Friday 30 th October 2015 Coordination Week 44: Massimo Giovannozzi, Wolfgang Hofle, Jorg Wenninger.

LHC Progress Friday 30 th October 2015 Coordination Week 44: Massimo Giovannozzi, Wolfgang Hofle, Jorg Wenninger.
00:15: Stable beams fill 1883, 1.1E33 cm-2s-1.  Seems the 144 bunches beam 1 doe not fit properly on the injection kicker waveform. Systematically the.

00:15: Stable beams fill 1883, 1.1E33 cm-2s-1.  Seems the 144 bunches beam 1 doe not fit properly on the injection kicker waveform. Systematically the.
7 November 2003 Status of CNGS NBI2003 - presented by K. Elsener 1 Status of CNGS Konrad Elsener CERN – Accelerators+Beams Division.

7 November 2003 Status of CNGS NBI presented by K. Elsener 1 Status of CNGS Konrad Elsener CERN – Accelerators+Beams Division.
Content  The LHC beams produced  LINAC2 & PSB  The PS  The SPS  Super Cycles and N0n-LHC physics  Conclusions IEFC Workshop, 8 March 2012 Rende.

Content  The LHC beams produced  LINAC2 & PSB  The PS  The SPS  Super Cycles and N0n-LHC physics  Conclusions IEFC Workshop, 8 March 2012 Rende.
6 April 2006Malika Meddahi 1 CNGS Project: primary beam 1.Project Overview 2. Proton beam line overview and status 3. Target status 4. Commissioning preparation.

6 April 2006Malika Meddahi 1 CNGS Project: primary beam 1.Project Overview 2. Proton beam line overview and status 3. Target status 4. Commissioning preparation.

Similar presentations

Ads by Google