1. University of California - Berkeley
Parts Requirements
Mission PDR
Jorg Fischer
University of California - Berkeley

2. Overview Parts & Materials Overview Requirements EEE Parts ID List
Procurement
Parts Status

3. Requirements & Specs GSFC 311-INST-001
Instructions for EEE Parts Selection, Screening, Qualification
Minimum EEE Parts Criteria for Level 3 = Moderate level of risk, as permitted by cost constrains
Parts in compliance with 311-INST-001, Level 3 (Grade 3) requirements and Standard parts
Use of GSFC PPL 21 (GSFC Preferred Parts List), design permitting
Non-standard EEE parts will require at a minimum:
Plastic Encapsulated Microcircuits (PEM) Selection, Screening, and Qualification (NASA/TP , PEM-INST-001)
PIND per MIL-STD-750 and MIL-STD883, required for cavity devises
Impose on manufacture, if possible
When needed, have DESC approved test facility perform testing

4. Requirements & Specs (continued) Customer Source Inspection
DPA performed for complex or known problem devices
Preconditioning, HAST, and CSAM Testing
Radiation Testing
Total Ionizing Dose Requirement is 66Krads (si)
- Review existing test data from GSFC, JPL, and manufacturer
- Review NASA “where used” historical data
Parts can be used, if data and or orbit requirements equal or exceed
THEMIS requirements
Cobalt 60, TID testing will be performed as needed
SEE use existing data or historical use (similarity)
- Whenever possible designers will use latchup immune devices

5. Requirements & Specs (continued)
Flowdown Performance Assurance Implementation
Plan requirements on subcontractors
Parts Control Board (PCB)
PCB members are: Themis QA, Design Engineer, and Themis Project manager, or representative
PCB shall review EEE part for:
Testing, Screening, and Qualification Failures
Alerts (e.g., GIDEP)
Review Non-Standard Parts Requirements

6. EEE Parts ID List UCB/SSL QA will maintain an EEE Parts
Identification List (PIL)
The PIL will contain:
Manufacturer’s generic part number
Military Part Number or SCD number
Manufacturer(s)
Where used (unique assembly) / Quantity
Quantity used
Quantity ordered
Lot/Date Code
Radiation Status (TID/SEL)
Alert Status
Comments

7. Procurement Parts will be procured to an approved Parts List.
Schedule permitting, will procure common buy.
Procurement of devices will be based upon design engineer’s confidence-of-use factor of 70%.
Unique, high-dollar items will be based on a 90%-100% confidence level.
Minimum Attrition / Spares factor of 20%-30% will be applied to flight procurement quantities.
ETU and Flight unit
Procurement will run concurrently

8. Parts Status Active Parts Status: 11/05/03 115 Parts 47 Parts In Stock
24 Parts On Order
44 Parts In Progress
RFQ stage
Pending Engineering Input
TID test 18 parts
12 parts are at ICS Inc. for the TID test
2 parts On Order
4 Parts RFQ stage