1. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
The tensile test specimen dimensions (ASTM E8 Standard) (dimensions are in millimeter)

2. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
(a) U-shaped bending and (b) 60 deg V-shaped bending

3. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
Schematic representation of Erichsen test (a) and deep drawing cylindrical cup test(b)

4. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
True stress versus true strain curves at  s−1 for different inclination angles from rolling direction

5. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
True stress versus true strain curves at 0.041 s−1 for different inclination angles from rolling direction

6. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
True stress versus true strain curves at 0.16 s−1 for different inclination angles from rolling direction

7. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
The effect of strain rate on the yield strength

8. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
The effect of strain rate on the tensile strength

9. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
The effect of strain rate on the uniform elongation

10. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
The effect of strain rate on the total elongation

11. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
Jump test of TWIP900CR steel

12. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
Determinations of instantaneous and transient strain rate sensitivities

13. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
Variations of instantaneous and total rate sensitivities with strain

14. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
Finite element modeling of (a) V-shaped die bending and (b) U-shaped die bending

15. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
Comparison of springback values

16. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
Erichsen test results

17. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
Deep drawing of a cylindrical cup at different conditions

18. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: Evaluation of Formability Under Different Deformation Modes for TWIP900 Steel
J. Eng. Mater. Technol. 2017;139(3): doi: /
Figure Legend:
Adiabatic temperature increase versus strain rate