1. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: New Liquid Transfer Active Balancing System Using Compressed Air for Grinding Machine
J. Vib. Acoust. 2015;137(1): doi: /
Figure Legend:
Principle of active balancing device. (a) Before balancing and (b) after balancing.

2. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: New Liquid Transfer Active Balancing System Using Compressed Air for Grinding Machine
J. Vib. Acoust. 2015;137(1): doi: /
Figure Legend:
Schematic diagram of active balancing system: Label 1 grinding wheel; Label 2 connecting flange; Label 3 drive shaft; Label 4 acceleration sensor; Label 5 displacement sensor; Label 6 speed sensor; Label 7 control unit; Label 8 air source; Label 9 air filter; Label 10 pressure reducing valve; Label 11 electromagnetic valve block; Label 12 air distributor; and Label 13 balancing disk

3. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: New Liquid Transfer Active Balancing System Using Compressed Air for Grinding Machine
J. Vib. Acoust. 2015;137(1): doi: /
Figure Legend:
Schematic of balancing disk. (a) Balancing chambers and (b) connecting tubes in cover plate.

4. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: New Liquid Transfer Active Balancing System Using Compressed Air for Grinding Machine
J. Vib. Acoust. 2015;137(1): doi: /
Figure Legend:
Schematic of air distributor. (a) Graphic model and (b) construction drawing.

5. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: New Liquid Transfer Active Balancing System Using Compressed Air for Grinding Machine
J. Vib. Acoust. 2015;137(1): doi: /
Figure Legend:
Schematic of chambers and connecting tube R1′ inner radius of liquid ring; R2 outer radius of liquid ring; p0 gas pressure of chamber A; u velocity of flow in connecting tube; and r1, r2, r3 radius of two ends and center for the connecting tube.

6. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: New Liquid Transfer Active Balancing System Using Compressed Air for Grinding Machine
J. Vib. Acoust. 2015;137(1): doi: /
Figure Legend:
Results of gas pressure analysis. (a) Minimum of gas pressure at 6000 rpm and (b) gas pressure at the center of connecting tube.

7. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: New Liquid Transfer Active Balancing System Using Compressed Air for Grinding Machine
J. Vib. Acoust. 2015;137(1): doi: /
Figure Legend:
Schematic of liquid ring

8. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: New Liquid Transfer Active Balancing System Using Compressed Air for Grinding Machine
J. Vib. Acoust. 2015;137(1): doi: /
Figure Legend:
Experimental setup for balancing work. (a) Experimental setup for the whole balancing system and (b) experimental setup for the balancing actuator.

9. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: New Liquid Transfer Active Balancing System Using Compressed Air for Grinding Machine
J. Vib. Acoust. 2015;137(1): doi: /
Figure Legend:
Block diagram of active balancing system

10. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: New Liquid Transfer Active Balancing System Using Compressed Air for Grinding Machine
J. Vib. Acoust. 2015;137(1): doi: /
Figure Legend:
Balancing results at 3000 rpm and 5000 rpm

11. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: New Liquid Transfer Active Balancing System Using Compressed Air for Grinding Machine
J. Vib. Acoust. 2015;137(1): doi: /
Figure Legend:
Repeatability results of balancing device

12. Date of download: 11/14/2017
Copyright © ASME. All rights reserved.
From: New Liquid Transfer Active Balancing System Using Compressed Air for Grinding Machine
J. Vib. Acoust. 2015;137(1): doi: /
Figure Legend:
Balancing results at 5500 rpm