Download presentation
Presentation is loading. Please wait.
1
ELEC 5270/6270 Spring 2009 Low-Power Design of Electronic Circuits Power Aware Microprocessors
Vishwani D. Agrawal James J. Danaher Professor Dept. of Electrical and Computer Engineering Auburn University, Auburn, AL 36849 Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
2
SIA Roadmap for Processors (1999)
Year 1999 2002 2005 2008 2011 2014 Feature size (nm) 180 130 100 70 50 35 Logic transistors/cm2 6.2M 18M 39M 84M 180M 390M Clock (GHz) 1.25 2.1 3.5 6.0 10.0 16.9 Chip size (mm2) 340 430 520 620 750 900 Power supply (V) 1.8 1.5 1.2 0.9 0.6 0.5 High-perf. Power (W) 90 160 170 175 183 Source: Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
3
Power Reduction in Processors
Just about everything is used. Hardware methods: Voltage reduction for dynamic power Dual-threshold devices for leakage reduction Clock gating, frequency reduction Sleep mode Architecture: Instruction set hardware organization Software methods Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
4
SPEC CPU2000 Benchmarks Twelve integer and 14 floating point programs, CINT2000 and CFP2000. Each program run time is normalized to obtain a SPEC ratio with respect to the run time of Sun Ultra 5_10 with a 300MHz processor. CINT2000 and CFP2000 summary measurements are the geometric means of SPEC ratios. LINPACK is numerically intensive floating point linear system (Ax = b) program used for benchmarking supercomputers. SPECPOWER_ssj2008 measures power and performance of a computer system. Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
5
Reference CPU s: Sun Ultra 5_10 300MHz Processor
Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
6
CINT2000: 3.4GHz Pentium 4, HT Technology (D850MD Motherboard)
SPECint2000_base = 1341 SPECint2000 = 1389 Source: Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
7
Two Benchmark Results Baseline: A uniform configuration not optimized for specific program: Same compiler with same settings and flags used for all benchmarks Other restrictions Peak: Run is optimized for obtaining the peak performance for each benchmark program. Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
8
CFP2000: 3.6GHz Pentium 4, HT Technology (D925XCV/AA-400 Motherboard)
SPECfp2000_base = 1627 SPECfp2000 = 1630 Source: Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
9
CINT2000: 1.7GHz Pentium 4 (D850MD Motherboard)
SPECint2000_base = 579 SPECint2000 = 588 Source: Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
10
CFP2000: 1.7GHz Pentium 4 (D850MD Motherboard)
SPECfp2000_base = 648 SPECfp2000 = 659 Source: Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
11
Energy SPEC Benchmarks
Energy efficiency mode: Besides the execution time, energy efficiency of SPEC benchmark programs is also measured. Energy efficiency of a benchmark program is given by: 1/(Execution time) Energy efficiency = ──────────── joules consumed Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
12
Energy Efficiency Efficiency averaged on n benchmark programs: n
Efficiency = ( Π Efficiencyi )1/n i=1 where Efficiencyi is the efficiency for program i. Relative efficiency: Efficiency of a computer Relative efficiency = ───────────────── Eff. of reference computer Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
13
SPEC2000 Relative Energy Efficiency
Always max. clock Laptop adaptive clk. Min. power min. clock Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
14
Voltage Scaling Dynamic: Reduce voltage and frequency during idle or low activity periods. Static: Clustered voltage scaling Logic on non-critical paths given lower voltage. 47% power reduction with 10% area increase reported. M. Igarashi et al., “Clustered Voltage Scaling Techniques for Low-Power Design,” Proc. IEEE Symp. Low Power Design, 1997. Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
15
Processor Utilization
Throughput = Operations / second Compute-intensive processes Maximum throughput Low throughput (background) processes Throughput System idle Time Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
16
Examples of Processes Compute-intensive: spreadsheet, spelling check, video decoding, scientific computing. Low throughput: data entry, screen updates, low bandwidth I/O data transfer. Idle: no computation, no expected output. Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
17
Effects of Voltage Reduction
Voltage reduction increases delay, decreases throughput: Slow reduction in throughput at first Rapid reduction in throughput for VDD ≤ Vth Time per operation (TPO) increases Voltage reduction continues to reduce power consumption: Energy per operation (EPO) = Power × TPO Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
18
Energy per Operation (EPO)
1.0 0.5 0.0 EPO Power TPO VDD / Vth Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
19
Dynamic Voltage and Clock
Throughput Time spent in: Battery life Fast mode Slow mode Idle mode Always full speed 10% 0% 90% 1 hr Sometimes full speed 1% 9% 5.3 hrs Rarely full speed 0.1% 99% 0.9% 9.2 hrs T. D. Burd and R. W. Brodersen, Energy Efficient Microprocessors, Springer, 2002, pp Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
20
Example: Find Minimum Energy Mode
Processor data (rated operation): 2 GHz clock 1.5 volt supply voltage 0.5 volt threshold voltage Power consumption 50 watts dynamic power 50 watts static power Maximum clock frequency for V volt supply f α (V – VTH)/V Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
21
Example Cont. Dynamic power: Pd = CV2f = C(1.5)2×2×109 = 50W
C = nF, capacitance switching/cycle Pd = V2f Dynamic energy per cycle: Ed = Pd/f = V2 Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
22
Example Cont. Clock frequency:
f = k (V – VTH)/V = k (1.5 – 0.5)/1.5 = 2 GHz k = 3 GHz, a proportionality constant f = 3(V – 0.5)/V GHz Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
23
Example Cont. Static power: Ps = k’ V2 = k’ (1.5)2 = 50W
k’ = mho, total leakage conductance Ps = V2 Static energy per cycle: Es = Ps/f = V3/[3(V – 0.5)] = 7.41 V3/(V – 0.5) Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
24
Example Cont. Total energy per cycle:
E = Ed + Es = V V3/(V – 0.5) To minimize E, ∂E/∂V = 0, or 5V2 – 4.6V = 0 Solutions of quadratic equation: V = volt, volt Discard second solution, which is lower than the threshold voltage of 0.5 volt. Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
25
Example: Result Rated mode Low energy mode Reduction (%) Voltage 1.5 V
54.7% Clock frequency 2 GHz 791 MHz 60% Dynamic energy/cycle 25.00 nJ 5.12 nJ 79.52% Static energy/cycle 12.96 nJ 48.16% Total energy/cycle 50.0 nJ 18.08 nJ 63.84% Dynamic power 50.0 W 4.05 W 91.90% Static power 10.25 W 79.50% Total power 100.0 W 14.20 W 85.80% Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
26
Problem of Process Variation in Nanometer Tecchnologies
Clock specification Power specification From a presentation: Power Reduction using LongRun2 in Transmeta’s Efficon Processor, by D. Ditzel May 17, 2006 Number of chips Nominal voltage Lower voltage operation Higher voltage operation Yield loss due to high leakage Yield loss due to slow speed Lower Vth Vth Higher Vth Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
27
Pipeline Gating A pipeline processor uses speculative execution.
Incorrect branch prediction results in pipeline stalls and wasted energy. Idea: Stop fetching instructions if a branch hazard is expected: If the count (M) of incorrect predictions exceeds a pre-specified number (N), then suspend fetching instruction for some k cycles. Ref.: S. Manne, A. Klauser and D. Grunwald, “Pipeline Gating: Speculation Control for Energy Reduction,” Proc. 25th Annual International Symp. Computer Architecture, June 1998. Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
28
Slack Scheduling Application: Superscalar, out-of-order execution:
An instruction is executed as soon as the required data and resources become available. A commit unit reorders the results. Delay the completion of instructions whose result is not immediately needed. Example of RISC instructions: add r0, r1, r2; (A) sub r3, r4, r5; (B) and r9, x1, r9; (C) or r5, r9, r10; (D) xor r2, r10, r11; (E) J. Casmira and D. Grunwald, “Dynamic Instruction Scheduling Slack,” Proc. ACM Kool Chips Workshop, Dec Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
29
Slack Scheduling Example
Standard scheduling A B C D E Slack scheduling A B C D E Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
30
Slack Scheduling Re-order buffer Low-power execution units Slack bit
Scheduling logic Low-power execution units Slack bit Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
31
Clock Distribution clock Copyright Agrawal, 2007
ELEC6270 Spring 09, Lecture 12
32
Clock Power Pclk = CLVDD2f + CLVDD2f / λ + CLVDD2f / λ2 + . . .
stages – 1 1 = CLVDD2f Σ ─ n = 0 λn where CL = total load capacitance λ = constant fanout at each stage in distribution network Clock consumes about 40% of total processor power. Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
33
Clock Network Examples
Alpha 21064 Alpha 21164 Alpha 21264 Technology 0.75μ CMOS 0.5μ CMOS 0.35μ CMOS Frequency (MHz) 200 300 600 Total capacitance 12.5nF Clock gating used. Total power W Clock load 3.25nF 3.75nF Clock power 40% 40% (20W) Max. clock skew 200ps (<10%) 90ps D. W. Bailey and B. J. Benschneider, “Clocking Design and Analysis for a 600-MHz Alpha Microprocessor,” IEEE J. Solid-State Circuits, vol. 33, no. 11, pp , Nov Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
34
Power Reduction Example
Alpha 21064: 3.45V, power dissipation = 26W Reduce voltage to 1.5V, power (5.3x) = 4.9W Eliminate FP, power (3x) = 1.6W Scale 0.75→0.35μ, power (2x) = 0.8W Reduce clock load, power (1.3x) = 0.6W Reduce frequency 200→160MHz, power (1.25x) = 0.5W J. Montanaro et al., “A 160-MHz, 32-b, 0.5-W CMOS RISC Microprocessor,” IEEE J. Solid-State Circuits, vol. 31, no. 11, pp , Nov Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
35
For More on Microprocessors
T. D. Burd and R. W. Brodersen, Energy Efficient Microprocessor Design, Springer, 2002. R. Graybill and R. Melhem, Power Aware Computing, New York: Plenum Publishers, 2002. Copyright Agrawal, 2007 ELEC6270 Spring 09, Lecture 12
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.