Download presentation
Presentation is loading. Please wait.
Published byBeata Lombardo Modified over 6 years ago
1
8 Input Layers (14b+2ctrl=16 b) = 8 coppie LVDS
+ 1 extra coppia per 16 extra bits (2 per layer) =16 b 8 Road buses (21 b+3 ctrl = 24 b) Each one needs 1,5 LVDS chip & LVDS connection EE, EP, WR_en The II word can have Extra Road bits. 1,5 x 1,5 cm*2 65 nm Space for DC-DC converters: 3,5 x ~6 cm^2 fra P2 e P3 These 6 cm results from ~ 3 cm saved on P3 e ~ 3 cm already existing on old board between P3 e P2. EE, WR_en ~3.5 cm Road Fifos TLK2501 o 2701 12.2mm × 12,2mm VPFP 64 1 mm thick 16 8+8 16 16 ~7 cm 1,2 cm 8+8 16 ~6 cm 2,5 cm 8+8 16 16 8+8 16 16 1,2 cm XC6SLX16 CPG196 8x8 mm2 1,2 thick 1,2 cm Hit Fifos
2
8 Road buses (25 b+8 ctrl = 33 bit)+
3 control lines = 36 bits per bus. 2 words packet Each bus needs 1 LVDS chip & One LVDS connection NEW 8 Input Layers (15b+2ctrl=17 b) = 8 coppie LVDS EE, EP, WR_en Space for DC-DC converters: 3,5 x ~6 cm^2 fra P2 e P3 These 6 cm results from ~ 3 cm saved on P3 e ~ 3 cm already existing on old board between P3 e P2. EE, WR_en ~3.5 cm Road Fifos TLK2521 12.2mm × 12,2mm TQ 64 1,2 mm thick 18-18 18 ~7 cm 1,2 cm 18-18 16 ~6 cm 2,5 cm 18 18-18 18-18 18 1,2 cm XC6SLX16 CPG196 8x8 mm2 1,2 thick 1,2 cm Hit Fifos
3
Buses di uscita: We have 20 bit addresses on AMchips, to address patterns that flow in 4-chip pipelines. We add 3 bits in the LAMB GLUE to distinguish the 8 pipelines →from the LAMB GLUE we send out 23 bit road addresses. We add extra 2 bits in the AMBoard to distinguish the 4 LAMBs →from the AMB we send out 25 bits With the road address we send out also 8 bit bitmap At the P3 we have 25+8 = 33 bits to transferred in two words, since they flow from the LAMB as 2 word- packets. Added to this we have 3 control bits: EE, EP and WR_EN. We propose this organization into 2 words: 33+3=36 bits fit perfectly in a single chip (18 bits x 2 words = 36 bits). So we propose to use 1 chip/bus and put: 1 chip/bus for a total of 8 buses transfer the bits produced by AMchips: WR_Ex + 17 bits road first word EEx, EPx + 8 bits bitmap + 8 bits road second word The total number of needed chips is 8 instead of 12! HIT BUSES: they fit perfectly in 1 chip/bus: EEx, WR_ENx, 15 Hit bits = 17 bits.
4
Mixed solution to test both FPGA direct connection and TI transceivers – second word can be sent directly 8 Road buses (25 b+8 ctrl = 33 bit)+ 3 control lines = 36 bits per bus. 2 words packet Each bus needs 1 LVDS chip & One LVDS connection 8 Input Layers (15b+2ctrl=17 b) = 8 coppie LVDS Space for DC-DC converters: 3,5 x ~6 cm^2 fra P2 e P3 These 6 cm results from ~ 3 cm saved on P3 e ~ 3 cm already existing on old board between P3 e P2. EE, EP, WR_en EE, WR_en ~3.5 cm Road Fifos XC6SLX45T 4 GTPs XC6SLX45T 4 GTPs TLK2521 12.2mm × 12,2mm TQ 64 1,2 mm thick 18-18 18 ~7 cm 1,2 cm 18-18 16 ~6 cm 2,5 cm 18 18-18 18-18 18 1,2 cm XC6SLX16 CPG196 8x8 mm2 1,2 thick 1,2 cm Hit Fifos
5
Solution with GTXs (up to 6 GHz) + GTPs (up to 3 GHz)
XC6SLX150T 8 GTPs FGG900 31x31 + SY58602 SY58601 XC6VLX75T 8 GTXs XC6SLX45T 4 GTPs 15x15 Zona 48 V va al terrazzino e gira in alto Per andare al P1 DC – DC converter
6
XC6SLX150T 8 GTPs XC6VLX75T 8 GTXs
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.