1. Block HEADS

2. Lesson 1: Intro to the work shop and Marking out
You are going to learn to:
Use a metal rule and tri square to accurately mark out for your blockhead.
Use a Tennon saw to cut the wood
Evaluate your work to make sure that you are working with accuracy

3. Lesson 2: Cutting pieces and sanding
HW how trees grow why they have knots ect

4. Lesson 3: Cutting shapes for the blockhead

5. Lesson 4: Sanding pieces

6. Lesson 5: Hand Drill / pillar drill
Pillar Drill HW

7. Lesson 6: Drilling blocks Body and Head hands and feet

8. Lesson 7: Putting the blockhead together

9. Lesson 8: Design ideas

10. Lesson 9: Design ideas

11. Lesson 10: Design development

12. Lesson 11: Final design – isometric drawing
Isometric work sheet for HW

13. Lesson 12: Adding the design to the block head

14. Lesson 13: Adding the design to the blockhead

15. Lesson 14: Evaluation