1. Jordan Mills, Sabrina Reyes, Isa Card, Chandler Anderson
Creminellis Box
Jordan Mills, Sabrina Reyes, Isa Card, Chandler Anderson

2. Our Goal
Our groups goal for this project was to maximize the amount of salami containers we could stack onto a 42x36 pallet with a maximum height of 55 inches.
We had to figure out how we could stack the containers efficiently and effectively and which container designs were easiest to stack.

3. Our Concept Designs
Design 1
Design 2
Design 3
13.5 in.
6 in.
6 in.
3 in.
6 in.
3 in.
9 in.
9 in.
9 in.
4.5 in.
3 in.
4.5 in.
Volume: (ab)/2
=(4.5x3)/2
= 6.75
6.5(lw)
=6.5(4.5)(3)x9
= in^3
Volume: ((3√(3))/2) a^2
a=side=3
=23.38x9
= in^3
Volume: ½(3)(4.5)9
=121.5
+(3)(4.5)(9)
= in^3
Design 3 has the least amount of volume, so we decided to use it in our pallet configurations.

4. Stacking configuration

5. Our Results We can fit a total of 288 boxes onto our pallet.
9 high, 8 wide, 4 deep.
Because of how we stacked the boxes, we lose a total of inches.
There was about .66 in. left over at the back of the pallet. We multiplied that by the height and width of the pallet to determine the total amount ( in.) We then figured out how much space was wasted on the sides so we took the regular area of a box (182.25) and divided it in half which gave us We then multiplied by which gave us inches lost.

6. Conclusion
We decided that Design 3 was best for maximizing the amount of boxes used because it had the smallest volume.
We believe that that space lost was overall minimal because of the large amount of boxes we were still able to fit.
Thank You!