1. CONSTRUCTION AND WORKING OF TIDAL POWER PLANT BY Prabhakaran.T AP/MECH
SNS COLLEGE OF ENGINEERING Coimbatore-107 Subject: Power Plant Engineering
CONSTRUCTION AND WORKING OF TIDAL POWER PLANT BY
Prabhakaran.T
AP/MECH

2. Prabhakaran.T/AP MECH/PPE
TIDAL ENERGY
Prabhakaran.T/AP MECH/PPE

3. Prabhakaran.T/AP MECH/PPE
INTRODUCTION
Tidal power, also called tidal energy, is a form of hydropower that converts the energy of tides into useful forms of power - mainly electricity. This is the only form of energy whose source is the moon.
Prabhakaran.T/AP MECH/PPE

4. Prabhakaran.T/AP MECH/PPE

5. Prabhakaran.T/AP MECH/PPE
TYPES
Tidal barrages
Tidal current turbines
Dynamic tidal power plants
Prabhakaran.T/AP MECH/PPE

6. Prabhakaran.T/AP MECH/PPE

7. Prabhakaran.T/AP MECH/PPE

8. Prabhakaran.T/AP MECH/PPE
Single basin system
Ebb generation: During flood tide basin is filled and sluice gates are closed , trapping water. Gates are kept closed until the tide has ebbed sufficiently and thus turbines start spinning and generating electricity. Flood generation: The basin is filled through the turbine which generate at flood tide. Two way generation: Sluice gates and turbines are closed until near the end of the flood tide when water is allowed to flow through the turbines into the basin creating electricity. At the point where the hydrostatic head is insufficient for power generation the sluice gates are opened and kept open until high tide when they are closed. When the tide outside the barrage has dropped sufficiently water is allowed to flow out of the basin through the turbines again creating electricity.
Prabhakaran.T/AP MECH/PPE

9. Prabhakaran.T/AP MECH/PPE
Double-basin system
There are two basins, but it operates similar to en ebb generation, single-basin system. The only difference is a proportion of the electricity is used to pump water into the second basin allowing storage.
Prabhakaran.T/AP MECH/PPE

10. Prabhakaran.T/AP MECH/PPE

11. Prabhakaran.T/AP MECH/PPE
Gravity Structures are massive steel or concrete structures attached to the base of the units to achieve stability by their own inertia.
Piled Structures are pinned to the seabed by one or more steel or concrete piles. The piles are fixed to the seabed by hammering if the ground conditions are sufficiently soft or by pre-drilling, positioning and grouting if the rock is harder.
Floating Structures provide a potentially more convincing solution for deep water locations.
Prabhakaran.T/AP MECH/PPE

12. Prabhakaran.T/AP MECH/PPE

13. Prabhakaran.T/AP MECH/PPE
Tidal plants in India
West Bengal Renewable Energy Development Agency in sunderbans.
The Indian state of Gujarat is planning to host South Asia's first commercial-scale tidal power station. The company Atlantis Resources is to install a 50MW tidal farm in the Gulf of Kutch on India's west coast, with construction starting early in later on it is decided to increase the capacity up to 250MW plants.
Prabhakaran.T/AP MECH/PPE

14. Prabhakaran.T/AP MECH/PPE
THANK U
Prabhakaran.T/AP MECH/PPE