1. Date of download: 11/15/2017
Copyright © ASME. All rights reserved.
From: Effect of Cross Section Reduction on the Mechanical Properties of Aluminium Tubes Drawn With Variable Wall Thickness
J. Manuf. Sci. Eng. 2011;133(6): doi: /
Figure Legend:
Effect of CSR on the Vickers hardness changes

2. Date of download: 11/15/2017
Copyright © ASME. All rights reserved.
From: Effect of Cross Section Reduction on the Mechanical Properties of Aluminium Tubes Drawn With Variable Wall Thickness
J. Manuf. Sci. Eng. 2011;133(6): doi: /
Figure Legend:
True strain-stress curves showing the room temperature tensile behavior of drawn tubes

3. Date of download: 11/15/2017
Copyright © ASME. All rights reserved.
From: Effect of Cross Section Reduction on the Mechanical Properties of Aluminium Tubes Drawn With Variable Wall Thickness
J. Manuf. Sci. Eng. 2011;133(6): doi: /
Figure Legend:
Effect of CSR on (a) the yield strength, (b) UTS, (c) strain at UTS, and (d) elongation of the drawn tubes using stepped and conical mandrel

4. Date of download: 11/15/2017
Copyright © ASME. All rights reserved.
From: Effect of Cross Section Reduction on the Mechanical Properties of Aluminium Tubes Drawn With Variable Wall Thickness
J. Manuf. Sci. Eng. 2011;133(6): doi: /
Figure Legend:
Effect of CSR on the WoF of the drawn tubes using stepped and conical mandrel

5. Date of download: 11/15/2017
Copyright © ASME. All rights reserved.
From: Effect of Cross Section Reduction on the Mechanical Properties of Aluminium Tubes Drawn With Variable Wall Thickness
J. Manuf. Sci. Eng. 2011;133(6): doi: /
Figure Legend:
Effect of CSR on the WoF of the drawn tubes using conical mandrel for three different initial outer diameters

6. Date of download: 11/15/2017
Copyright © ASME. All rights reserved.
From: Effect of Cross Section Reduction on the Mechanical Properties of Aluminium Tubes Drawn With Variable Wall Thickness
J. Manuf. Sci. Eng. 2011;133(6): doi: /
Figure Legend:
Grain size distribution after one pass of tube drawing: (a) starting material (CSR = 0%), deformed samples at (b) CSR = 11.61%, (c) CSR = 17.46%, (d) CSR = 24.40%, (e) CSR = 31.40%, and (f) CSR = 35.99%

7. Date of download: 11/15/2017
Copyright © ASME. All rights reserved.
From: Effect of Cross Section Reduction on the Mechanical Properties of Aluminium Tubes Drawn With Variable Wall Thickness
J. Manuf. Sci. Eng. 2011;133(6): doi: /
Figure Legend:
Photos and designs of (a) stepped mandrel; (b) conical mandrel with angle β = 1 deg; (c) conical mandrel with angle β = 5.02 deg, and (d) die with angle α = 10 deg

8. Date of download: 11/15/2017
Copyright © ASME. All rights reserved.
From: Effect of Cross Section Reduction on the Mechanical Properties of Aluminium Tubes Drawn With Variable Wall Thickness
J. Manuf. Sci. Eng. 2011;133(6): doi: /
Figure Legend:
The illustration of variable wall thickness tube drawing using (a) a position controlled stepped mandrel and (b) position controlled conical mandrel []