1. From: Dynamical Limit of Compliant Lever Mechanisms
Date of download: 11/15/2017
Copyright © ASME. All rights reserved.
From: Dynamical Limit of Compliant Lever Mechanisms
J. Mech. Des. 2008;130(4): doi: /
Figure Legend:
General measurement scheme: An external unknown force Fe is applied to a linear elastic test body P. We assume that the elastic properties of P are known, and then we obtain Fe by the measurement of the displacement xr produced at Point R. This displacement can be directly measured or used to drive a compliant amplifier. In the first case, the measurement result is the displacement xr0=Fe∕Ker, evaluated when the amplifier is not connected, and in the latter the measurement result is the displacement xb at the output port of the compliant device.