1. Kyoto meeting

2. Presentation Layout Glyn
Introduction
Assembly status FM0
Drawing status FM2
Novel Fujikura fit (Fleiter)
Impregnation
Impregnation status at KIT,
University of Twente pressure on broad face of Roebel cable
Insulated copper wire at centre of Roebel cable
Quench detection
Voltage taps (low current),
Temperature sensors ( high current).
Temperature margin in magnet
Pickup coil quench detection trials feather zero
Roxie model angular dependence
Temperature versus short sample current plot
Test at variable temperature (predictable, ensures usefull data)
Finite element cross-section (Feather zero)
Thermal contraction YBCO
Conclusion

3. Presentation Layout Jeroen
Introduction
Feather M0/2 status
Network model
Cable Geometry
Equations
Validation (first)
Magnetisation
Influence number of elements
Hysteresis loops
Calculated Dynamic Field Quality FM2
Quench Analysis
Peak temperature vs time
Current redistribution in and between tapes
Requested input
Conclusion

4. CEA Presentation? Status Cosine Theta coil Planning
Nano foil superconducting joint