1. HF Digital Communications
How to work those strange
sounds you hear on the air
Check your sound before making the presentation.
Slides with a speaker icon can be clicked on the hear what the mode sounds like
John Clements KC9ON Stephen H. Smith WA8LMF
Joe Miller KJ8O John Mathieson AC8JW
Brian Johnston W8TFI May 2014

2. Contents Introductions Why Digital? Digital Modes of Operation
Hardware : Radio, Computer, and interfaces

3. Contents
Software
Tips and Tricks
Q&A

4. Introductions John Clements KC9ON Licensed in 1979 at age 16
Retired from electronics manufacturing and IT systems
Active experimenter and home brewer

5. Introductions Stephen Smith WA8LMF
Land-Mobile-Radio Systems & Field Engineer
Ham since 1964

6. Introductions Joe Miller KJ8O
SWL since 1967, first licensed in 2006 and collects QSL cards
President of OCARS (W8TNO)
Certified Public Accountant

7. Introductions Brian Johnston W8TFI Licensed in 1976
Computer operator for a major news paper
Avid experimenter and home brewer

8. Introductions John Mathieson AC8JW Licensed since about 2005
Active in CW and digital modes

9. Why Digital? Send and receive text, images, data, and audio
Some modes work very well in noisy and weak signal environments
If you can’t hear them you can’t work them is no longer true!

10. Why Digital?
Some modes can provide error free or reduced error transmissions.
Good for Emergency Communications
For emergency work large data files such as needed supplies, lists of injured and other large amounts of health and welltfare traffic can be sent error free

11. Why Digital? Many modes use smaller bandwidths than voice
97.1(b) contribute to the advancement of the radio art.
97.313(a) use the minimum transmitter power necessary to carry out the desired communications.
We will see in upcoming slides how many of these modes will fit multiple conversations in the same voice bandwidth.
A few FCC reasons why to go digital.

12. Digital Modes of Operation
There are more digital modes than you can shake a stick at!
RTTY, PSK, QPSK, MFSK, Olivia, MT63, JT65, Contestia, Hellschreiber, Throb, Packet, WSPR, SSTV, FreeDV and many many more!
Some of these modes are experimental.
Some have specific uses.
Others have not caught on or have been out dated by newer technology modes.
For example: I heard THOR mode the first and only time a few days ago.

13. Digital Modes of Operation
Each have their own good and bad
We will just look at a few popular ones……

14. The Old Timers of Digital CW
CW is the oldest digital mode
Started before the birth of radio
Computers are not required
From QRSs in seconds per ‘dit’
To QRQ speeds greater than 150WPM
There was a space satellite experiment on 10M for the Juno Satellite earlier in CW Speed was 30 seconds per 'dit'. Sending HI at this rate was 10 minutes long!

15. The Old Timers of Digital RTTY (Radio Teletype)
Became popular in the 1950’s using WWII surplus equipment.
60WPM / 45 baud (changes per second)
FSK - Shifts between 2 frequencies, typically 170Hz apart.
Sensitive to QSB and QRN, no error correction.
Although PSK31 which we talk about shortly is popular, there is still quite a following on RTTY.

16. PSK31 One of the first sound card modes
Popular for keyboard to keyboard
Narrow 31Hz bandwidth
5 conversations fit in the same space as RTTY
30% slower than RTTY
40WPM / 31 baud
Sensitive to QSB and QRN, No error correction but outperforms RTTY
Although PSK31 is slower than RTTY, it is still plenty fast typing for most people.

17. MFSK16 Like RTTY but uses 16 different frequency shifts
Old technology mode - required complicated hardware before sound card software was available
Speed of 78WPM / 62.5 baud with a 316 Hz bandwidth
ARRL Bulletins are transmitted in MFSK16

18. MFSK16 Uses forward error correction (FEC)
Typically this is done by sending redundant data
The cost penalty is extra time to send the data multiple times
Result is greatly reduced errors from QSB, QRN and Multipath propagation

19. Olivia Another MFSK Variant Has forward error correction like MT63
Good with QSB, QRM
Will decode 10-14dB below the noise floor

20. Olivia Common bandwidth, shifts, and speeds Mode BW Shifts WPM 500/1620
1000/32
1000 32 24

21. MT63 MFSK Variation using 64 frequency shifts
Great for sending large amounts of data
Forward error correction, can lose up to 25% and still have perfect copy

22. MT63
3 Modes of operation
MT WPM 500Hz BW
MT WPM 1KHz BW
MT WPM 2KHz BW
Typically MT is used by EMCOMM and MARS

23. JT65/JT9 QRPp & EME Weak signal mode
JT65 uses 65 shifts in a 355Hz bandwidth
JT9 – Fairly new mode
Uses 9 shifts in only 15.6Hz bandwidth
Sounds like a constant tone
I do quite a bit of operating on these modes. The 45 seconds intervals are great for multi-tasking! I'm also amazed at being able to work half way around the world on only a few watts of power.

24. JT65/JT9
Very slow mode!
45 seconds long to send 72 bits or ~13 characters
Standard messages typically contains two call signs, a grid locator or signal report, the message type.

25. JT65/JT9 Now also used on HF
W6CQZ wrote “JT65-HF” that makes HF operation easy, especially for low power stations.
projects/jt65-hf/files

26. JT65/JT9
Actual off-the-air RX in central MI with mobile whip on 20 meters.

27. SSTV
Started with dedicated hardware using surplus long-persistence RADAR CRT’s; now all done with sound-card software.
Commonly called a “digital” mode, but most SSTV is analog, except for “EasyPal” which is actually a general-purpose digital-file-transfer-over-radio program.
Various formats of SSTV exist but most software automatically detects and handles formatting
Some of the SSTV modes are Martin, Scottie, Robot, and P3/5/7. Each of these modes have sub-modes which define the picture time, number of scan lines, and type of encoding/decoding

28. SSTV
Weather Fax (WeFax) is a similar mode, not used in amateur radio but can be found on the SW bands.

29. Digital Voice The future of radio?? About ½ the bandwidth
1.25KHz wide using a 16QPSK signal
FM-quality noiseless voice on HF!
Most activity on MHz
Free software at:
I am just starting to play with FreeDV digital voice and have been receiving signals on 20M.
Once my second sound card arrives I can try transmitting.
I just bought 2 sound cards from Amazon, $1.80 and $8.00 with free shipping!

30. Digital Voice Requires 2 sound cards USB sound cards are cheap
One for radio-to-speaker (RX)
One for mic-to-radio (TX)
USB sound cards are cheap
From $1.80 to $25

31. Hardware Only 3 components needed
Radio
Computer
Audio / PTT Interface
Optionally a Computer Aided Tuning (CAT) interface
Not required but nice to have if the radio supports it

32. Hardware How much does it cost?
Assuming you have the radio and computer…….
Build your own interface from free to $25
Buy commercial interfaces from $60-300

33. Hardware Radio Almost any USB HF Transceiver
Older mechanical analog VFO rigs may NOT be stable enough for narrow modes like PSK31 but work well on modes like RTTY and SSTV.
Newer radios with stable frequency synthesizers are best.
Some high end rigs have PSK and RTTY built in!

34. Hardware VHF/UHF Radio
These modes also work on VHF/UHF FM radio’s such as 2M rigs.
Great when the HF bands are bad and coverage is local.
Also works through repeaters.

35. Hardware Computer Big and fast not required
Most “XP” computers work fine!
Minimum Requirements
Available USB or RS-232 port
Sound Card
1GHz CPU, 100MB free RAM
300MB Drive space
Depends on software - YMMV
The latest and greatest for HRD V6 asks for 1-4GB RAM and 50GB hard drive which sounds excessive.
My current HRD 5.0 (Running CAT, Logbook, and DK780 at the same time) uses about 30Mb RAM and 300MB hard drive.
FLDigi uses 20MB RAM and 20MB hard drive.

36. Start today with a simple attenuator cable
Interfaces Receive
Start today with a simple attenuator cable
Parts are about $10 at Radio Shack, cheaper elsewhere!
wa8lmf.net/miscinfo/Universal-Sound-Card-Cable.pdf
It may be good to have a few hard copies of this interface on hand!
Some RigBlasters make you believe putting a cable from radio Speaker out to PC “Line In” will work. Sometimes….maybe with the right touch!
If your PC supports “Line IN” Great! Otherwise save some problems by using an attenuator cable

37. Interfaces Receive

38. Interfaces Transmitting
Transmitting is a little more complex
PTT keying
Isolate the audio to prevent ground loop issues
You can try an attenuator method like receive. Sometime it works and sometimes not!

39. Interfaces Commercial
Several Manufacturers
MFJ
West Mountain (Rig Blaster)
TigerTronics
Some models include cables
Other models require purchasing cables for your rig

40. Interfaces Commercial
Better models include a sound card built in
Your internal PC sound card is available for regular use
Prices from $60 - $300
The models with a built in sound card will require an additional USB port connection to your PC.
Depending on your PC and setup you may need to purchase a USB hub. For example the PC only has 2 USB ports and you have a CAT, PTT, and sound card interface!

41. Interfaces Commercial
Older models only handle the TX side
These models use a straight RX cable and the PC LINE-IN instead of the MIC jack!
An RX attenuator cable is still required to go into the PC Mic jack

42. Interfaces Homebrew
As basic as two ohm audio transformers, a few resistors, and a $1.00 opto-isolator chip for PTT keying.
Note: Make sure the Mic is unplugged, turned down or off. Some radios, such as the IC-725 will mix the back port and mic together is the Mic gain is turned up!
More Advantages: homebrewing can be cheaper….sometimes
Disadvantage…. Time to collect the parts and built it up
Possible print a schematic or two for those interested.

43. Interfaces Homebrew
Radio Receive Audio Out
Computer Audio In

44. Interfaces Homebrew Radio Spkr/Aux Audio Out Computer Audio In
Computer Speaker/Line Audio Out
Radio Mic/Aux Audio In

45. Interfaces Homebrew Radio Spkr/Aux Audio Out Computer Audio In
Computer Speaker/Line Audio Out
Radio Mic/Aux Audio In
Serial Port RTS Pin
Radio PTT Line

46. Interfaces Typical Setup
Depending on manufacturer, the MIC/PTT interface is usually a generic cable with jumper wires set inside the interface or a custom cable made for the specific radio model.

47. Software Ham Radio Deluxe
Ham Radio Deluxe includes a program called Digital Master 780 (DM780)
Current Commercial version 6 $100
Older version 5 is free!
Handles most modes including SSTV

48. Software Ham Radio Deluxe
Also contains:
Integrated radio (CAT) control
Log book
Satellite Tracking
PSK31 super sweeper
Remote Control
And more…..

49. Software Ham Radio Deluxe

50. Software FLDigi
FLDigi is FREE!
Handles most modes including SSTV and WeFax
Also contains a log book and radio control

51. Software FLDigi The program of choice for EMCOMM
Handles radiogram and ICS forms
Note: additional software needed for these on the FLDigi site.

52. Software FLDigi

53. NBEMS Narrow Band Emergency Message System
Easy Deployment using existing VHF/UHF equipment.
Uses FLMSG – An addon of FLDigi
Forms for ARRL, ICS, Red Cross, MARS and others.
Confirms message was received correct.

54. NBEMS

55. NBEMS
FLWRAP/FLAMP – FLDigi add-ons allows Documents, Spreadsheets, Pictures, and multiple files to be transmitted.

56. NBEMS MT63-2000L Olivia 8-500 Center Frequency: 1500Hz
Fast 30 second Forms
Olivia 8-500
Slower, Handles Marginal signals better

57. Software Others
Special modes such as JT65/JT9 and digital voice require their own software
Many other software program exists – both free and commercial

58. MultiPSK, Digipan, MixW, mmSSTV, and WinPSK are a few
Software Others
MultiPSK, Digipan, MixW, mmSSTV, and WinPSK are a few
Most choices are personal preference
Personally my preferences are HRD, WSJTx, and FreeDV. I have used FLDigi and Digipan in the past. I have also used some of the Linux versions of software as well.

59. Comparison of modes found in DM780 versus FLDigi
PSK both Olivia both
QPSK both * RTTY both
PSKR FLDigi * RTTYM DM780 *
Contestia both Thor both *
CW both Throb both *
DominoEX both * WEFAX FLDigi
Hellschreiber both Navtex FLDigi
MFSK both SITOR FLDigi
MT63 both WWV FLDigi
SSTV DM780
Personally my preferences are HRD, WSJTx, and FreeDV. I have used FLDigi and Digipan in the past. I have also used some of the Linux versions of software as well.
See: for an explanation of the multi-PSK modes
RTTYM appears to be a variant of Olivia and Contestia – not in common use

60. Tips and Tricks Power Reduce your power!
Unlike SSB, these modes either run at 100% duty cycle, or use multiple tones sensitive to intermodulation distortion!
Be kind to your finals!
Keep peak power out well below key-down CW maximum to minimize distortion.
Keep ALC to zero
Turn off speech processing or compression

61. Tips and Tricks Jacks
Use the Auxiliary, Accessory, “Data”, or “Packet” jacks on the radio.
Most radios from the major manufacturers have one or more of these jacks on the rear panel
May have constant audio input, output, and PTT lines

62. Tips and Tricks Jacks Typical Jacks
6-pin Mini-DIN Pin Full-size DIN

63. Tips and Tricks Jacks
No need to adjust the volume or mic gain all the time
No need to unplug the speaker to hear the radio
No need to swap the mic in and out
You may need a mic switch!
Some radios, such as the ICOM IC-725 will combine the mic audio and Accessory mic audio!
Fortunately the mic gain control ONLY adjusts the mic input and not the accessory jack
Alternatively a Mic on/off switch could be used

64. Tips and Tricks Jacks
Some radios have an audio out line in the microphone jack. This can help reduce extra cables.

65. Tips and Tricks RSID Use Reed-Solomon Identification Short code at the
beginning of a transmission which identifies the mode
Several programs automatically detect this and pop up a box

66. Tips and Tricks Sound Device
Check your sound card settings in the control panel!
Turn off special effects
Turn off pass-thru or “Listen to this device” modes
Set rate to 16 bit 48000Hz
When I got a Vista machine it was a pain to get ANY program running! However, once the bugs were fixed the machine ran great in digital.
Then I got a Windows 8 computer
Digital modes were OK but some things didn't work right. Weak signals would not decode. JT9 did not work at all!
Problem was the “Special Effects” turned on by default!
All is well now :)

67. Tips and Tricks Sound Device
Use the mixer to adjust your transmit audio using a dummy load and short 5-10 second intervals
More tips.....
Pass through mode causes an echo, most noticable on Echolink!
JT9 requires 48KHz, many modes get by fine with less.
Try setting your mixer Mic and Speaker to 50%, then adjust within your software. You still may need to make other mixer adjustments after that.

68. Tips and Tricks Waterfalls
RTTY PSK MFSK JT9
JT Digital Voice

69. Tips and Tricks Waterfalls
MT63
Olivia
SSTV

70. Tips and Tricks Frequencies
Common PSK31 frequencies
Other modes are usually a few KHz from this area
Another handout here of more specific frequencies may be available

71. Tips and Tricks Frequencies
SSTV is popular
Digital Voice
MI Digital Traffic Net (MIDTN)
3.583Mhz Olivia 8/500
Tu, Th, & Sa 8PM local

72. Tips and Tricks References
ARRL
Ham Radio Deluxe – Free V5
FLDigi

73. Tips and Tricks References
JT65/JT9 hflink.com/jt65/
FreeDV (Digital Voice)
Olivia

74. Tips and Tricks References
Commercial Sites
Software:
Ham Radio Deluxe V6
Interfaces
MFJ
RigBlaster
SignalLink

75. Getting started on FLDigi
Home:
Downloads:
Beginners’ guide:

76. Questions?

77. Errata This presentation and other notes can be found here:
Launch DM780 and FLDigi for demonstrations and other questions