1. Subsystem Build & Test Andre Pelletreau, Jeremy Willman, Kai Maslanka,
Vincent Stowbunenko, & Kerry Oliveira

2. Risk Assessment

3. Problem Tracking

4. Mechanical Enclosure Status Update
All drawings complete
Brackets cut, drilled and countersunk
Assembly Document written
Aluminum enclosure sheets completed (Handouts!!!)
Finished today after weeks of asking John Bonzo

5. Architecture And Implementation of Software
Main File Performs The Calibration and Testing Protocol Specified By Bear
Main File is Primarily Composed of Functions That Enable Control Signals, Processes/Stores Data, Acquires and Checks Real Time Measurements
Main File Contains Minimal Code To Minimize Debug Time By Storing Functions As Separate Arduino Files
Separate Functions Are Written By Individual Members to Maximize Throughput

6. Verification Methodology
Testing Can Begin Once Boards Are Completed
Individual Functions Will be Enabled And The Resulting Response will be monitored
Once All Functions Are Individually Tested, The Completed Main Function can be Executed On A Known Good and Bad Board to ensure There are no False Positives or False Negatives
Software Testing Is Expected To Take The Largest Portion of Semester To Complete

7. IMAGINE RIT Progress Proposal submitted
Poster outline and format complete
Background and Mission Statement complete
Other details to follow throughout the semester
Paper outline complete
Abstract and Background complete

8. Background for Poster
The Smart Power Supply Test Bench is an automated test fixture used to lower the time spent testing and the total cost of quality assurance on a custom power supply and control board assembly. The unit provides consistent power to an oil drill over long distances. The Smart Power Supply Test Fixture fully calibrates and tests the functionality of the power supply board and controller board serially and in parallel in under 10 minutes. Original constant current and constant voltage load designs, an Arduino micro-controller, and relays switching between active loads for testing aid in the automation. The production of this fixture will dramatically increase the speed, efficiency, and safety of testing.

9. Paper

10. Final Paper Outline

11. Next Seven Weeks…