1. Date of download: 11/22/2017
Copyright © ASME. All rights reserved.
From: Dynamical Models of the Camber and the Lateral Position in Flat Rolling
Appl. Mech. Rev. 2017;69(4): doi: /
Figure Legend:
Top view of mill stand and flat product

2. Date of download: 11/22/2017
Copyright © ASME. All rights reserved.
From: Dynamical Models of the Camber and the Lateral Position in Flat Rolling
Appl. Mech. Rev. 2017;69(4): doi: /
Figure Legend:
Stress resultants in the product at the entry and exit port of the roll gap

3. Date of download: 11/22/2017
Copyright © ASME. All rights reserved.
From: Dynamical Models of the Camber and the Lateral Position in Flat Rolling
Appl. Mech. Rev. 2017;69(4): doi: /
Figure Legend:
Stand-alone simulation model

4. Date of download: 11/22/2017
Copyright © ASME. All rights reserved.
From: Dynamical Models of the Camber and the Lateral Position in Flat Rolling
Appl. Mech. Rev. 2017;69(4): doi: /
Figure Legend:
Tangential rolling (p′(0−)=p′(0+)=0) with κ(0−) = const., Δh+/h¯+=Δh−/h¯−, and λ = 1.4

5. Date of download: 11/22/2017
Copyright © ASME. All rights reserved.
From: Dynamical Models of the Camber and the Lateral Position in Flat Rolling
Appl. Mech. Rev. 2017;69(4): doi: /
Figure Legend:
Straight rolling (ω− = 0) of a cambered product with κ(0−) = const., Δh− = 0, Δh+ = 0, and λ = 1.4

6. Date of download: 11/22/2017
Copyright © ASME. All rights reserved.
From: Dynamical Models of the Camber and the Lateral Position in Flat Rolling
Appl. Mech. Rev. 2017;69(4): doi: /
Figure Legend:
Straight rolling (ω− = 0) of an initially straight product (κ(0−) = 0) with φ(0−)=−0.1  rad, Δh+/h¯+−Δh−/h¯−=0.15, and λ = 1.4

7. Date of download: 11/22/2017
Copyright © ASME. All rights reserved.
From: Dynamical Models of the Camber and the Lateral Position in Flat Rolling
Appl. Mech. Rev. 2017;69(4): doi: /
Figure Legend:
Straight rolling (ω− = 0) of an initially straight product (κ(0 − ) = 0) with φ(0−)=−0.1  rad, Δh− = 0, Δh+ = 0, and λ = λ0 + Xλ1 where λ0 = 1 and λ1 = 0.2/m

8. Date of download: 11/22/2017
Copyright © ASME. All rights reserved.
From: Dynamical Models of the Camber and the Lateral Position in Flat Rolling
Appl. Mech. Rev. 2017;69(4): doi: /
Figure Legend:
Rolling of an initially straight product (κ(0−) = 0) with upstream angular velocity ω−=(−0.1  rad/m)v¯−, φ(0−)|X=0=0, Δh− = 0, Δh+ = 0, and λ = 1.4

9. Date of download: 11/22/2017
Copyright © ASME. All rights reserved.
From: Dynamical Models of the Camber and the Lateral Position in Flat Rolling
Appl. Mech. Rev. 2017;69(4): doi: /
Figure Legend:
Top view of the deformation (elongation) of an infinitesimal trapezoidal section of the product in the roll gap