1. Maxi Move Position the harness under the patient as shown.
Then move the extending side pieces between the person’s legs
Position the maxi slide over the patient using the remote
control
Lock the straps onto the arms of the device. Attach shoulder straps first followed by the straps between the legs

2. Use the remote to tilt the
lift so the patient is in a move upright position during transfer
This lift can lower
all the way to the
floor. However the
need for spine
immobilization must
be determined first
Weight capacity is 500lbs.
Wash harness with germicidal wipes
Place in purple laundry sack for transport pickup if the harness is heavily soiled