1. OpticStudio Demonstration Host: Kristen Norton
Zemax, LLC © 2017

2. Topics we’ll cover today
Introduction
Set up microscope sample file
Analyze performance
Optimize for smallest spot size
Lockdown design
Tolerancing example
Convert to non-sequential mode
Zemax, LLC © 2017

3. Thanks for joining me – I’m Kristen Norton OpticStudio Product Manager
Introduction
Thanks for joining me – I’m Kristen Norton
OpticStudio Product Manager
Previously
Sr Optical Engineer at Zemax
Before that, Laser & Optics Engineer
Physics & Applied Physics degrees
Zemax, LLC © 2017

4. Object distance to first lens must be 170 mm
Requirements
Object distance to first lens must be 170 mm
Object is 16 mm in diameter
Use with visible light = F, d, C lines
With diameter margin = mm (0.01 in)
Design for magnification = -0.02
Zemax, LLC © 2017

5. Summary Started with a microscope sample file
Analyzed initial performance
Spot Diagram, Ray Fan, Siedel Diagram
Image Simulation, Grid Distortion
Optimize for smallest spot size
Quick Focus, Slider, Visual Optimizer, Optimization Wizard
Local automatic optimization, Hammer optimizer
Tolerancing
Design Lockdown
Inverse sensitivity, Monte Carlo simulation
Converted to non-sequential
Zemax, LLC © 2017

6. Thank you for attending!
Question & Answer
Thank you for attending!
Questions can be submitted via the GoToWebinar control panel
If your questions don’t get answered, please us at
Zemax, LLC © 2017