1. Virtualization Engine Console Usability Enhancements
Mike Murphy Virtualization Engine console development

2. Agenda Topics to be covered are:
Virtualization Engine console Welcome page
Readiness status/links
Resource links
Health Center Setup Wizard

3. Learning Objectives
At the conclusion of this material, you should be able to:
Locate the Virtualization Engine Welcome page
Describe the purpose of the Welcome page
Identify what links are available from the Welcome page
Locate the Health Center Setup Wizard
Describe the purpose of the wizard
Use the wizard to add management sources, groups, and monitors to the health center

4. Virtualization Engine Welcome Page
Launch via navigation tree Welcome item
Can be launched via the Welcome item under the Virtualization Engine Console tree node

5. Virtualization Engine Welcome Page
Enhances Virtualization Engine console usability
Provides one place to go to determine at a glance if functions in the Virtualization Engine console are ready to use
Provides links to perform additional configuration/setup if needed
Provides links to other functions when detected, such as, IBM Director setup and Virtualization Engine software updates
Provides info center links regarding EWLM setup if EWLM is detected
Provides an info center link regarding how to navigate and use the Virtualization Engine console

6. Virtualization Engine Welcome Page
Page divided into 2 sections
Readiness: items that have a status
Resources: items that have no status
Welcome page is divided into 2 sections:
VE Readiness - contains items that have an associated state indicating whether that item is ready to use or needs further configuration
VE Resources - contains items that do not have an associated state, i.e., links to other portlets or info center articles
Can refresh Readiness items to check for status change by clicking Refresh button

7. Virtualization Engine Welcome Page - Readiness
Readiness functions listed:
Single signon (always displayed) – launches the Single Signon Management portlet
Health center (always displayed) - launches the Health Center Setup Wizard
Resource discovery services (displayed only if RDS is installed in this VE Environment) – launches the Resource Dependency Service Configuration portlet
Status icons:
Red – some configuration action is required to enable the use of the function
Yellow – some configuration has been completed, however more may be needed. Some function may be useable.
Green – all configuration has been completed, the function is useable.
Clicking the link associated with a red or yellow status launches the appropriate application you can use to resolve the condition.
Status icons
Red: action is required
Yellow: some configuration is done, more may be needed
Green: all configuration is done, ready to use
Click link to resolve red or yellow condition
Refresh capability

8. Virtualization Engine Welcome Page - Readiness
Set up your user identity associations
Set up single signon for your users link launches the Single Signon page which allows you to set up your user identity associations
See the Single Signon presentation for details

9. Virtualization Engine Welcome Page - Readiness
Add mgmt sources, groups, and monitors to the health center
Set up the health center link launches the Health Center Setup Wizard page which helps you add management sources, groups, and monitors to the health center.
Details are covered later in this presentation.

10. Virtualization Engine Welcome Page - Readiness
Configure Resource Dependency data collectors
Configure Resource Dependency Service link launches the Resource Dependency Service Configuration page which, provided you have the proper authority, allows you to:
manage your resource dependency data collector configurations
view ODI-RM discovered resources
work with custom data collectors
configure Intelligent Device discovery campaigns used to probe your network discovering resources
manage WebSphere Application Server
See the Resource Dependency Service presentation for details.

11. Virtualization Engine Welcome Page - Resources
Welcome page resources links
Set up IBM Director - launches the Set Up IBM Director page which is covered later (displayed only when one or more IBM Director bridges is detected in your VE Environment)
Configure EWLM domain manager - launches an info center link (displayed only when EWLM software is detected in your VE Environment)
Install EWLM managed servers - launches an info center link (displayed only when EWLM software is detected in your VE Environment)
Configure EWLM managed servers - launches an info center link (displayed only when EWLM software is detected in your VE Environment)
Ensure that you install the latest Virtualization Engine updates – launches the Virtualization Engine Updates page (displayed only if you are a VEAdministrator)
Get to know the Virtualization Engine console – launches an info center article (always displayed)
All links except Get to know the Virtualization Engine console are conditionally displayed

12. Set Up IBM Director Steps you through setup process
Installs Director Console if not already installed
Uses LIC support
Set up IBM Director link launches the Set Up IBM Director page which leads you through the steps to setup IBM Director
Director Console is installed if not already installed (uses Java Web Start)
Links into IBM Director function uses launch in context functionality

13. Virtualization Engine Updates
Allows you to find, download, and install updates for your Virtualization Engine products
Ensure that you install the latest Virtualization Engine updates link launches the Virtualization Engine Updates page which allows you to find, download, and install updates for your Virtualization Engine products.
The Virtualization Engine Updates component contacts IBM to check for available updates for your installed Virtualization Engine products, and then gives you the ability to download and install them.
From one Virtualization Engine Console system you can download and install updates on your remote Virtualization Engine systems also. You can also download IBM Director agent and eWLM agent updates and import them into IBM Director for distribution.
See the Virtualization Engine Updates presentation for details.

14. Health Center Setup Wizard
Launch via navigation tree Health Center Setup item
Can be launched via the Welcome item under the Virtualization Engine Console tree node

15. Health Center Setup Wizard
Also launch from Management Source Configuration page
Can also be launched via the Set up the health center link on the Management Source Configuration page

16. Health Center Setup Wizard
Enhances Virtualization Engine console usability
Wizard format steps user through health center setup
Discovers management sources that have not already been added
Allows you to choose which management sources to add
Allows you to rename management sources
Optionally adds your groups and monitors
Summarizes your choices

17. Health Center Setup Wizard - Welcome
Explains what wizard does for you
The Welcome page describes the purpose of the setup wizard and how to use it.

18. Health Center Setup Wizard – Management Sources
Discovers mgmt sources that haven’t already been added
Allows rename
Link to view current mgmt sources
Discovers management sources that have not already been added for the current user and lists those in a table
Management source name is generated based on host name and management source type (e.g., MC, DSM, DIR)
Can rename by selecting one or more sources in the table and clicking Rename button
Must select one or more to add before continuing
Can view your current list of management sources by clicking View currently configured management sources link

19. Health Center Setup Wizard – Rename
This is the name the management source is known as in the health center
Cannot be renamed after it is added by wizard
Allows you to rename the selected management source
Once you’ve changed the name and finished the wizard, the name cannot be changed again.

20. Health Center Setup Wizard - Resources
Select whether you want your groups and/or monitors added
Allows you to choose whether you want your groups and/or monitors added to the health center automatically
Saves you time – using health center you would need to select each group or monitor individually
Note: if an active connection cannot be obtained to the management source containing the groups or monitors, it will not be added.

21. Health Center Setup Wizard - Summary
Summarizes your selections
Provides choice to open health center when finished
Summarizes the choices you’ve made on the previous pages
Provides option to open health center when wizard completes
You can go back to change selections (either by clicking Back or selecting the specific page name listed on the left)

22. Conclusion / Wrap-up
The Welcome page is your first stop for determining whether the Virtualization Engine console is ready to use
The Welcome page also provides links to key functions and information
The health center setup wizard simplifies the process of adding management sources, groups, and monitors to the health center

23. Additional Resources Virtualization Engine console (prior to GA)
IBM Director (prior to GA)
pSeries Cluster System Management
iSeries Navigator - Management Central
(Systems Management topic)
Lightweight Directory Access Protocol (LDAP)
Enterprise Identity Mapping (EIM)
(eBusiness and Web Serving Security and Directory Server Topic)
IBM Directory Server
WebSphere Application Server

24. Notices
Produced in the United States of America, 08/04, All Rights Reserved
IBM, IBM eServer logo, IBM logo, e-business on demand, DB2, DB2 Connect, DB2 Universal Database, HiperSockets, Enterprise Storage Server, Performance Toolkit for VM, Tivoli, TotalStorage, VM/ESA, WebSphere, z/OS, z/VM and zSeries are trademarks or registered trademarks of International Business Machines Corporation in the United States, other countries or both.
Java and all Java-based trademarks and logos are trademarks of Sun Microsystems, Inc. in the United States, other countries or both.
UNIX is a registered trademark of The Open Group in the United States and other countries.
Intel is a trademark of Intel Corporation in the United States, other countries or both.
Linux is a trademark of Linus Torvalds in the United States, other countries, or both.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation
Other company, product and service names may be trademarks or service marks of others.

25. Notices – cont’d
Information concerning non-IBM products was obtained from the suppliers of their products or their published announcements. Questions on the capabilities of the non-IBM products should be addressed with the suppliers.
IBM hardware products are manufactured from new parts, or new and serviceable used parts. Regardless, our warranty terms apply.
IBM may not offer the products, services or features discussed in this document in other countries, and the information may be subject to change without notice. Consult your local IBM business contact for information on the product or services available in your area.
All statements regarding IBM’s future direction and intent are subject to change or withdrawal without notice, and represent goals and objectives only.
Performance is in Internal Throughput Rate (ITR) ratio based on measurements and projections using standard IBM benchmarks in a controlled environment. The actual throughput that any user will experience will vary depending upon considerations such as the amount of multiprogramming in the user’s job stream, the I/O configuration, the storage configuration, and the workload processed. Therefore, no assurance can be given that an individual user will achieve throughput improvements equivalent to the performance ratios

26. End Of Presentation