1. Welsh Video Network Support Centre © The JNT Association 2001
Cameras
Welsh Video Network Support Centre
© The JNT Association 2001

2. Cameras There are two cameras in the large studios. You can:
Camera 1 is the camera above the remote monitor.
The position of Camera 2 is determined locally.
You can:
Control the cameras manually
Define and use preset positions
Use ‘auto-point’ with Camera 1
Talk
© The JNT Association 2001
WVN Cameras

3. Selecting a camera
Select a camera on the ‘Home Page’ and then either ‘Preview’ or ‘Send’ to display the image
© The JNT Association 2001
WVN Cameras

4. Controlling a camera
Control a camera by selecting it and pressing ‘Control’
© The JNT Association 2001
WVN Cameras

5. Controlling a camera Use the arrow keys and ‘zoom’ function
This could be on the projector, the results could be on screen
© The JNT Association 2001
WVN Cameras

6. Controlling a camera Auto-point can be turned on or off on Camera 1
Demonstrate the auto-find
© The JNT Association 2001
WVN Cameras

7. Defining the presets
Use camera controls to find the correct position… then select ‘Presets’…
Do it on screen
© The JNT Association 2001
WVN Cameras

8. Defining the presets Step 1 Step 2
Select ‘Set’ then the number you wish to associate with that camera position
Step 1
Step 2
Do it on screen
© The JNT Association 2001
WVN Cameras

9. Using the presets From ‘Home’ select Camera 1 or 2,
select ‘Presets’, then choose a preset number
Do it on screen
© The JNT Association 2001
WVN Cameras