1. Telio® CAD by NobelProcera™
Location, date
Presenter name

2. Telio® CAD Crown and Bridge by NobelProcera™
Key product features
Temporary acrylic crowns and bridges (1-6 units)
Excellent occlusal detail
and surface finish
Outstanding precision
of fit
Six shades with lifelike fluorescence for optimal
esthetics
Cost efficient
Exceptional strength
Telio® CAD is a registered trademark of Ivoclar Vivadent AG. Disclaimer: Some products may not be regulatory cleared/released for sale in all markets. Please contact the local Nobel Biocare sales office for current product assortment and availability.

3. Telio® CAD Crown and Bridge by NobelProcera™
Key Benefits for Laboratories
Full contour milled temporary solutions (1-6 units)
Esthetics and strength (natural fluorescence and six shades)
Kit for individualized cosmetics (build-up and staining)
Consistent precision of fit
High end surface finish and easy to polish
High milling stability in marginal areas
Telio CAD Bridge designed and milled by NobelProcera
Telio® CAD is a registered trademark of Ivoclar Vivadent AG. Disclaimer: Some products may not be regulatory cleared/released for sale in all markets. Please contact the local Nobel Biocare sales office for current product assortment and availability.
Speaker notes: Telio CAD temporary solutions are not included in the NobelProcera 5 year warranty

4. Telio® CAD Crown and Bridge by NobelProcera™
Key Benefits for Clinicians
Milled temporary solution on natural teeth and implant abutments
Consistent marginal fit, esthetics and strength versus chair side temporaries up to 6 units
Esthetics - natural fluorescence and six shades
Ideal surrounding tissue support – due to virtual design options for lab
Less plaque accumulation due to high-end surface finish
Complete solution - additional support as veneer kit for corrections or reparations (in-mouth or chair-side)
Easy to polish
High milling stability in marginal areas
Telio CAD Bridge designed and milled by NobelProcera
Telio® CAD is a registered trademark of Ivoclar Vivadent AG. Disclaimer: Some products may not be regulatory cleared/released for sale in all markets. Please contact the local Nobel Biocare sales office for current product assortment and availability.
No warranty on temporary solutions

5. Telio® CAD Crown and Bridge by NobelProcera™
Superior strength
Strength tests – Laboratory tests by Ivoclar Vivadent, December 2009

6. Telio® CAD – Composition & Indications
Acrylate Polymer blocks (PMMA) for the fabrication of temporary restorations
High strength: Ideal for long-term temporaries
Wear period up to 1 year

7. Telio® CAD

8. Telio® CAD – Features Long-term indication
12 month wear period for Telio CAD
3 month wear period for chairside material (ex. Telio CS C&B)
No polymerization needed (milled restorations are fully polymerized)
Homogenous material (eliminates mixing errors, air bubbles, etc)
Laboratories can further characterize Telio CAD restorations
Labs will use Telio Lab LC veneering materials & stains
Best option for esthetically demanding cases

9. Telio® CAD – Shades & Strength
Available in 6 shades
Bleach BL3, A1, A2, A3 & A3.5, B1
Exhibit natural fluorescence
Flexural strength: 130 MPa
Flexural modulus: 3200 MPa

10. Telio® CAD – Characterization & Add-on
Laboratories can utilize Telio Stains or make simple adjustments with Telio Add-On flow
Telio Lab LC light-curing veneering materials can be used to maximize esthetics

11. Telio® CAD – Polishing
Pre-polish using rubber polishers & silicon wheels
Use Universal Polishing Paste (goat hair brush pictured)
Can further polish using wool or leather buffing wheels

12. Telio® CAD – Advanced Characterization
Telio® Lab LC
There are two light curing components in the Telio Lab system
Telio Lab LC incisal pastes for the cut-back technique
Transpa Incisal 1, 2, & 3
Transpa Incisal neutral
Telio LC base
Telio Stains
Blue, light yellow, white, orange

13. Telio® Lab LC Veneer Kit
4 Telio Lab LC Transpa Incisal (1, 2, 3, neutral)
1 Telio Lab LC Base
4 Telio Stains (blue, white, light-yellow, orange)
Telio Add-On Flow
Telio Activator
SR Composiv
SR Gel

14. Telio® CAD – Advanced Characterization
Cut-back Telio CAD restoration
Blast with Al2O3
Apply an MMA-based monomer such as Telio Activator
Allow to react for 2 – 4 minutes
Apply SR Composiv (resin bonding agent) and light cure
Apply desired Telio Stains and light cure

15. Telio® CAD – Advanced Characterization
Apply Telio Lab LC Transpa Incisal materials
Coat the contoured restorations with SR Gel and light cure
Follow polishing protocol

16. Telio® CAD – Advanced Characterization

17. What does a dentist do after receiving a Telio CAD restoration?

18. Telio® CS
Telio CS C&B
Telio CS Link
Telio CS Desensitizer

19. Telio® CS Desensitizer
Glutaraldehyde containing dentin desensitizer
Can be used with temporary, direct, and indirect procedures

20. Chairside Relining Process
Optional: Scrub in Telio Desensitizer: 10 sec.
Disperse excess with air

21. Chairside Relining Process
Roughen the internal surface with a diamond bur or abrade with Al2O3
Rinse and dry
Agitate Telio Activator over the roughened surface for 30 sec.
Allow to react for another 30 to 60 sec.
Apply Heliobond
Disperse with air
Light cure for 10 sec.
(Heliobond is a resin bonding agent)

22. Chairside Relining Process
Place Telio CS C&B directly into the internal aspect of the restoration
Seat relined restoration
Allow to partially cure intra-orally for 3 min.
Allow complete cure extra-orally for 2 additional min.
Remove excess material

23. Telio® CS Link Telio CS Link Temporary resin cement
2 translucent shades: Transparent & A3
Dual-curing
Eugenol-free

24. Chairside Relining Process
Finish adjustments with silicone carbide polisher
ex.) OptraPol or AstroPol
Apply Telio CS Link temporary cement into the restoration
Allow to self-cure or light-cure
Clean up excess cement

25. Restoration with Telio® CAD Bridge by NobelProcera™
3-unit Telio® CAD Bridge used as temporary restoration for replacement of tooth no. 3 (16).
Diagnosis and Preparation Telio CAD Bridge by NobelProcera provides an excellent long-term solution (up to 12 months). Clinical occlusal view of post extraction site prior to bone augmentation and implant placement. Conventional preparation design (slight chamfer) and rounded edges is ideal for clinical function of provisional restoration.
NobelProcera Software
3-unit Telio CAD Bridge designed using anatomic tooth library and deformation tools in NobelProcera Software. Ideal virtual adjustment of occlusal contact points eliminates time consuming adjustments in the laboratory.
Case courtesy of Dr. Stefan Holst, University Erlangen/Germany, DentalX®, Munich/Germany. Telio® CAD is a registered trademark of Ivoclar Vivadent AG.

26. Restoration with Telio® CAD Bridge by NobelProcera™
Treatment
Telio CAD Bridge by NobelProcera delivered ready-to-use. For standard applications only polishing is required. Available Telio Lab LC components allow for fast and easy esthetic characterization - if requested.
The CAD/CAM machining features high material homogeneity and eliminates polymerization shrinkage or an inhibition layer.
Results
Clinical occlusal view of non characterized Telio CAD Bridge by NobelProcera. Material properties and industrial manufacture provide excellent marginal precision and integrity minimizing risk for secondary caries or fracture if recurrent removal is required.
Case courtesy of Dr. Stefan Holst, University Erlangen/Germany, DentalX®, Munich/Germany. Telio® CAD is a registered trademark of Ivoclar Vivadent AG.

27. Restoration with Telio® CAD Bridge by NobelProcera™
6-unit Telio® CAD Bridge used as temporary
restoration for no
Diagnosis and Treatment Decision
Initial intraoral anterior view and following preparation of abutment teeth prior to impression taking.
Non-restorable central incisors were maintained until manufacturing of long-term temporary restoration.
NobelProcera Software
6-unit Telio CAD Bridge designed using anatomic tooth library and deformation tools in NobelProcera Software.
Ideal virtual adjustment of occlusal contact points eliminates time consuming adjustments in the laboratory.
Case courtesy of Dr. Stefan Holst, University Erlangen/Germany, DentalX®, Munich/Germany. Telio® CAD is a registered trademark of Ivoclar Vivadent AG.
Copyright Nobel Biocare Services AG

28. Restoration with Telio® CAD Bridge by NobelProcera™
Treatment
Telio CAD Bridge by NobelProcera manufactured based on virtual design. The broad range of shades (A-D) available ensures optimal selection according to patient needs. Additional characterization with manual cut-back and Telio Lab LC material can be done for an excellent esthetic outcome.
Results
Intraoral anterior view of customized Telio CAD Bridge following extraction and ridge preservation. Material composition and homogeneity in combination with industrial manufacturing ensure precision and material strength.
Case courtesy of Dr. Stefan Holst, University Erlangen/Germany, DentalX®, Munich/Germany. Telio® CAD is a registered trademark of Ivoclar Vivadent AG.