1. Johnson & Pace Incorporated TAMU Facility Management Working Group
Presents
Statement of Qualifications (SOQ) for
TAMU Facility Management Working Group
ID/IQ Professional Architecture and Engineering Services
SMALL PROJECTS FOR THE TEXAS A&M UNIVERSITY SYSTEM

2. ORGANIZATION CHART
Johnson & Pace’s guiding principle is to create a team that provides the highest quality of professional expertise ensuring TAMU’s success!
Our team has the knowledge to check design deliverables for completeness and adherence according to the university’s needs.

3. Johnson & Pace Incorporated Profile
Services:
We provide multidisciplinary solutions for engineering, architectural, and surveying needs.
Date of Incorporation:
Johnson & Pace was founded in January , and Incorporated in 1998.
Professional # and Type with Certifications:
17 engineers, (17 PE, 1 SE, 2 LEED AP, 1 CFM, 1 CPESC); 2 surveyors (2 RPLS); 1 Architect (AIA)
80+ Employees
Location:
1201 NW Loop 281, Suite 100
Longview, TX 75605
Ph:
Fax:

4. College Station Office Profile
Established: March 2014
Location:
111 University Drive East, Suite 215
College Station, TX
Ph:
Fx:
5 Employees

5. College Station Office Profile Continued…
Education
BS, Civil Engineering, Texas A&M University, 2004
Professional Registrations
Professional Engineer (PE) in TX
Experience
10 years, total
5 years, City of College Station
3 years, United States Navy
Associations
Bryan-College Station Chamber of Commerce
Office Manager: Philip Bargas, PE
Mr. Philip Bargas has 10 years of engineering experience serving as a project manager and engineer for both public and private entities in Texas. His experience includes public and private roadway design, public and private utility design, storm water design, water quality and detention design, and construction administration.
Managed contingency construction projects in Afghanistan with his US Navy battalion in support of Operation Enduring Freedom.

6. College Station Office Profile Continued…
Daniel Beamon, PE
Education
BS, Civil Engineering, Texas A&M University, 2004
Professional Registrations
Professional Engineer (PE) in TX
Experience
10 years, total
1 year construction experience
3 years, City of College Station
1 year, Johnson & Pace
Skills
AutoCAD Civil 3D
Hydraflow Storm Sewers
Hydraflow Hydrographs
XP Storm
Hard Dollar
Project Manager: Daniel Beamon, PE
Mr. Daniel Beamon has 10 years of engineering experience serving as engineer and project manager for public and private entities in Texas. His extensive experience includes specialties in site planning, grading, utility design, storm water design, roadway design, and construction administration.
Mr. Beamon has served the public by working for the City of College Station as a Project Manager for capital projects, where he managed various road, sidewalk, water/wastewater, and transportation projects.

7. TAMU Completed Project
Project name: Texas A&M University Institute for Genomic Medicine (TIGM) Procedure Room 1517 (College Station, Texas)
Description: Converted the existing 228 SF Holding Room 1517 in to a procedure room by adding water, sewer, electrical, communication and HVAC (MEP) facilities.
Renovation, under construction August 2015
228 SF
October 15, December 14, 2014, 6 week delay due to jurisdictional research by client
Johnson & Pace Incorporated provided Mechanical, Electrical, and Plumbing Services - JPI will provide construction drawings to upgrade utilities to serve the proposed procedure room. The proposed upgrades will serve the facilities shown on the diagram provided by SSC to JPI titled, TIGM Muneoka floor plan diagram.

8. TAMU Completed Project Cont.
The MEP facilities included a sink and associated water and sewer connections. Additionally, the communication facilities included coordinating with TAMU CIS department to determine scope, locations, and construction methods to add internet outlets.
Dimensions, material, and layout areas were coordinated based on direction of SSC- Construction Cost Estimate, Bidding/Negotiation, assist during construction: Other construction phase services included review of material submittals and substitutions, review and submittal of contractor’s application for pay, preparation of Letter of Final Completion, and preparation of “As-Built” drawings based on plans marked-up by the contractor.

9. UHCL Project
Project name: University of Houston – Clear Lake Police Building Site Work Houston, Texas
Description: Site design for 63,000 SF of parking lot, driveway, and sidewalks; approximately 30,000 SF of earthwork; associated dry and wet utilities.
Under construction January 2015
July 28, December 3, 2014, 6 week delay due to jurisdictional research by client
Johnson & Pace Incorporated is the prime firm, general civil engineering

10. UHCL Project Cont.
Updated Design

11. JW Operating – Northeast Texas Regional Offices
Description: Tasked by the Client to program architectural space requirements to consolidate various local divisions into a single Regional Office, JPI developed plans to integrate the new offices into an existing abandoned FFA building at the East Texas Regional Airport.
The 28,000 square foot program necessitated efficient use of the existing 22,000 square foot facility and construction of a 6,100 Square foot addition.
From Feasibility study and Space Programming to final design, bidding and Contract Administration, JPI provided full architectural and engineering services for the project including interior design, color selection and furnishings consultation.

12. JW Operating – Northeast Texas Regional Offices
Pictures

13. JW Operating – Northeast Texas Regional Offices
Program document, schematic layout showing work stations, and construction floor plan for JW operating.

14. JW Operating – Northeast Texas Regional Offices
Sheet A1.7 Floor Plan

15. JW Operating – Northeast Texas Regional Offices
Schematic Floor Plan

16. JW Operating – Northeast Texas Regional Offices
Space Program
Pages 1 & 2

17. JW Operating – Northeast Texas Regional Offices
Space Program
Page 3

18. Mechanical Engineering Services
Johnson & Pace MEP engineers provide mechanical, electrical, and plumbing design services that comply with established design codes and technical guidelines. Using Autodesk Revit, our engineers use building information modeling (BIM) to keep facility design a collaborative, integrated process with architects and other designers.

19. Mechanical Engineering Services Cont.
MEP services include the following:
Heating, Ventilating, and Air Conditioning (HVAC) systems
Exhaust systems
Direct digital control (DDC) systems
Piped heating and cooling water generation and distribution systems
Domestic cold and hot water systems
Domestic waste and vent systems
Domestic hot water heating systems
Natural gas piping systems
Roof drain and piping systems
Performance specification of automatic sprinkler systems
Medical gas systems

20. Thank You For Your Business!