1. Hole (Hole Tools) Create Simple Hole (rectangle)
Create Simple Hole (Standard)
Create Simple Hole (Sketch)
Create Standard Hole

2. Simple Rectangle Hole
Simple rectangle hole: Click Hole -> Click on Create simple hole -> select rectangle -> Placement -> select a surface to place the hole -> Click on Offset References -> Using Ctrl+left mouse key to select two references (e.g. surfaces or edges) -> Click on Shape to change the diameter, blind & tip angle ->Done

3. Simple Standard Hole
Simple rectangle hole: Click Hole -> Click on Create simple hole -> select Standard -> Placement -> select a surface to place the hole -> Click on Offset References -> Using Ctrl+left mouse key to select two references (e.g. surfaces or edges) -> Click on Shape to change the diameter, blind & tip angle ->Done

4. Simple Sketch Hole
Simple rectangle hole: Click Hole -> Click on Create simple hole -> select Sketch -> Click on Sketch (Options: open/sketch) -> draw a 2-D closed sketch with a centerline -> Done -> Placement -> select a surface to place the hole -> Click on Offset References -> Using Ctrl+left mouse key to select two references (e.g. surfaces or edges) -> Click on Shape to change the diameter, blind & tip angle ->Done

5. Standard Hole
Simple rectangle hole: Click Hole -> Click on Create standard hole -> Placement -> select a surface to place the hole -> Click on Offset References -> Using Ctrl+left mouse key to select two references (e.g. surfaces or edges) -> Click on Shape to change the diameter, blind & tip angle -> ISO -> Screw size ->Done

6. Draft (Draft Tool)
Some parts are made by sand mold casting. The wood models are designed with draft so that the wood models can withdraw from the sand molds easily.
Draft
Split Draft
Variable Draft

7. Draft
Draft: Click Draft -> references -> Draft Surfaces -> select the surface/surfaces which needs/need to be drafted (Using Ctrl+left mouse key) -> Draft hinges
-> select surface or edge as draft hinges -> Using mouse drag to change the angle (range: -30 deg ~ 30 deg) ->Done

8. Split Draft
Split Draft: Click Draft -> references -> Draft Surfaces -> select the surface/surfaces which needs/need to be drafted (Using Ctrl+left mouse key) -> Draft hinges -> select surface or edge (e.g. ‘FRONT’ plane) as draft hinges -> Split (default: No split) -> Split by draft hinge -> Side options -> (Draft sides independently, Draft sides dependently, Draft first side only, Draft second side only) ->Done

9. Variable Draft
Variable Draft: Click Draft -> references -> Draft Surfaces -> select the surface/surfaces which needs/need to be drafted (Using Ctrl+left mouse key) -> Draft hinges -> select surface or edge as draft hinges -> Using mouse drag to change the angle -> Click on Angle -> Using right mouse key to select Add angle -> add #, angle & location into the table
->Ok

10. Example

11. Exercise: Simple Rectangle Hole

12. Exercise: Simple Rectangle Hole

13. Exercise: Simple Sketch Hole

14. Exercise: Simple Sketch Hole