1. HD-SDI White LED Ball Camera
Installation
Features
Step.1
Step.2
1/3” 2.2 Mega Pixel CMOS sensor
(Full HD of 1080p and HD 720p, 1,100TV lines)
24 White LEDs (working by PIR sensor)
PIR sensor (detecting 5m / 17ft)
Keep color image even at night time
3.7mm 3megapixel fixed lens
Weather proof / IP-65 rating
12vdc
Dimensions
Part name & Dimension
Specifications
Fix the base bracket with screws on the wall or ceiling
TV System
NTSC
PAL
Image Sensor
1/3" SONY CMOS Sensor
Total Pixel
2,000(H) x 1,121(V), 2.24M Pixels
Active Pixel
1,936(H) x 1,105(V), 2.12M Pixels
Scan system
Progressive
Resolution
Digital: NTSC : 1920x1080p(1080p/30fps),
1280x720p(720p/30fps)
Analog: 700TVL
Min.illumination
Color: 0.1Lux
Color DSS: 0.002Lux
Video Output
HD-SDI, Analog: NTSC/ PAL CVBS(without WDR)
S/N Ratio
More than 50dB (AGC off)
Brightness
0~20 steps
Lens
3.7mm 3 megapixel fixed lens
Shutter speed
Auto / Manual (1/30(25) ~ 1/60,000)
DSS x4
WDR/ BLC
Off
AGC
Off / On
White Balance
Auto / One Push / Manual / Indoor / Outdoor
DNR
Off / Low / Middle / High
HLC
Off/ On
Sharpness
O ~ 10 steps
Freeze
E.Zoom
X1 ~ x7
Privacy Mask
32 points
ACE
GAMMA
0.45 / 0.50 / 0.55 / 0.60 / 0.65
Motion Detection
Off / On (4points)
Language
English, Korean, Chinese
Power supply
DC12V±10%
Adjust ball angle and
fixe the ball base
Step.3
Turn fix the dome cover on the base b hand and lock by L-wrench
Accessories
Cable
All specification and pictures are subject to change without notice to improve quality.