Presentation is loading. Please wait.

Presentation is loading. Please wait.

TechReady 16 9/6/2018 Network Management in System Center 2012 SP1 Virtual Machine Manager – Part 2 Greg Cusanza Senior Program Manager, Microsoft WS-B313.

Similar presentations


Presentation on theme: "TechReady 16 9/6/2018 Network Management in System Center 2012 SP1 Virtual Machine Manager – Part 2 Greg Cusanza Senior Program Manager, Microsoft WS-B313."— Presentation transcript:

1

2 TechReady 16 9/6/2018 Network Management in System Center 2012 SP1 Virtual Machine Manager – Part 2 Greg Cusanza Senior Program Manager, Microsoft WS-B313 © 2013 Microsoft Corporation. All rights reserved. Microsoft, Windows, and other product names are or may be registered trademarks and/or trademarks in the U.S. and/or other countries. The information herein is for informational purposes only and represents the current view of Microsoft Corporation as of the date of this presentation. Because Microsoft must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information provided after the date of this presentation. MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO THE INFORMATION IN THIS PRESENTATION.

3 Agenda WS-B312: Part 1 WS-B313: Part 2 Watch the recording online
What’s new in SP1 How to setup your datacenter networking from scratch WS-B313: Part 2 Room: Here Time: Now Software defined networking with VMM Switch extensibility Network virtualization

4 SP1 :Software Defined Networking
Virtual Machine Software Defined Networking (management, configuration, data) Hyper-V Network Virtualization Extensible Virtual Switch Network Policy/Offloads SR-IOV DHCP Guard IPSec Task Offload Bandwidth Control Trunk Mode Virtual VM Network Subnet /24 Extension Fabric VLAN 25 Subnet /26 Logical NW Physical Network

5 Benefits Faster deployments Less management overhead
More freedom to migrate Better utilization of the capacity And more

6 Virtual switch extensibility

7 Network Overview with virtual switches
Public Internet Gateway Load Balancer LB Backend Corporate SQL SPF, etc. VMM Management Windows Azure services for Windows Server Tenant 1 VMs Tenant 1 Tenant 2 VMs Tenant 2 Hyper-V hosts with extensible Virtual switch LM, Cluster, Storage

8 Using Virtual Switch Extensions
Why? Add functionality not native to Hyper-V switch Able to tie virtual to physical network together Additional tenant isolation capabilities Examples Cisco Nexus 1000v - forwarding InMon sflow - capture NEC OpenFlow - forwarding 5nine - filtering

9 Hyper-V extensible switch and VMM
CA1 VM1 VMU CA2 VM2 3rd Party components VMM Agent VMM Server SCVMM Vendor Plugin Hardware Virtualization Hyper-V Host – Root Partition Capture Extension Filtering Extension Forwarding Extension VMM Imports: Port profiles Logical networks IP Pools Tenant networks Vendor network management console Physical NIC (SRIOV) Physical NIC (Non SRIOV) Policy database Top of rack switch

10 One more type of isolation
Physical separation Physical switches and adapters for each type of traffic Layer 2: VLAN Tag is applied to packets which is used to control the forwarding Network Virtualization Isolation through encapsulation. Independence from physical address space. Private VLAN (PVLAN) Primary and Secondary tags are used to isolate clients while still giving access to shared services. External Isolation is implemented by switch extension. Technology is opaque to VMM.

11 Virtual Switch Extensibility demo

12 Network Virtualization

13 Why network virtualization?
Isolation without reconfiguring your network Perfect for environments where tenants come and go. Dev/Test on the fly. Migration freedom VMs can migrate across physical subnets. Address space mobility Bring an address space from your corporate network to a hoster Complete self service Tenant administrators can create their own networks

14 Multi-tenant shared infrastructure
Network Virtualization Gateway Compute Storage Network Physical data center

15 Standards-Based Encapsulation - NVGRE
Better network scalability by sharing PA among VMs Explicit Virtual Subnet ID for better multi-tenancy support GRE Key 5001 MAC GRE Key 6001 MAC Different subnets

16 Network Overview with load balancer
Public Internet Gateway Load Balancer LB Backend Corporate SQL SPF, etc. VMM Management Windows Azure services for Windows Server Tenant 1 VMs Tenant 1 Tenant 2 VMs Tenant 2 Hyper-V hosts with extensible Virtual switch LM, Cluster, Storage

17 Network Overview with Network Virtualization
Public Internet Network Virtualization Gateway Load Balancer LB Backend Corporate Provider SQL SPF, etc. VMM Management Windows Azure services for Windows Server Tenant 2 VMs Tenant 2 Tenant 1 VMs Tenant 1 Hyper-V hosts with extensible Virtual switch LM, Cluster, Storage

18 Configuring fabric for network virtualization demo

19 Role of the gateway Allows virtualized networks to talk to physical networks Two modes: Hybrid cloud Private cloud

20 Routing Gateway – “Private Cloud”
VMNetwork 1 “Contoso Finance” VM1 IP: GW: DNS: DNS1 IP: Subnet 1 /24 CORP-RED /24 VM2 IP: GW: DNS: Contoso datacenter network – /16 Subnet 2 /24 CORP-KIRK /24 Network Virtualization Router , and Subnet G (hidden) /30 DC IP: x VN IP: IP: Gateway “Contoso”

21 VPN Gateway – “Hybrid Cloud”
VMNetwork 1 “Contoso Finance” VM1 IP: GW: DNS: Contoso Corp Network DNS1 IP: Subnet 1 /24 CORP-RED /24 VM2 IP: GW: DNS: Fabrikam Datacenter network – /16 Subnet 2 /24 CORP-KIRK /24 Network Virtualization Router , and IP: Internet DC IP: x VN IP: Subnet G (hidden) w.x.y.z/30 IP: Any VPN Gateway “Contoso” IP: NVGRE VPN Gateway “Fabrikam”

22 What can I use it for? With gateway Without gateway
TechReady 16 9/6/2018 What can I use it for? With gateway Private cloud: route to local networks Hybrid cloud: create site to site tunnel Without gateway Use a VM with two NICs One on isolated network, one on “Internet” Now that hosts are setup what can you do with it? © 2013 Microsoft Corporation. All rights reserved. Microsoft, Windows, and other product names are or may be registered trademarks and/or trademarks in the U.S. and/or other countries. The information herein is for informational purposes only and represents the current view of Microsoft Corporation as of the date of this presentation. Because Microsoft must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information provided after the date of this presentation. MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO THE INFORMATION IN THIS PRESENTATION.

23 Network Overview without Gateway
Public Internet Network Virtualization Gateway Load Balancer LB Backend Corporate Provider SQL SPF, etc. VMM Management Windows Azure services for Windows Server Tenant 2 VMs Tenant 2 Tenant 1 VMs Tenant 1 Hyper-V hosts with extensible Virtual switch LM, Cluster, Storage

24 Gateway demo

25 Related Sessions SD-B201 Implementing Common Scenarios in VMM: Services and Service Templates IM-B203 Building UI Add–Ins For System Center 2012 SP1 Virtual Machine Manager IM-B308 System Center 2012 SP1 Virtual Machine Manager: Managing Large Datacenters IM-B310 Troubleshooting Common System Center 2012 SP1 Virtual Machine Manager Issues WS-B312 How to Design and Configure Networking in VMM and HyperV (Part 1 of 2) WS-B313 How to Design and Configure Networking in VMM and HyperV (Part 2 of 2) WS-B314 Implementing Common Storage Scenarios in Windows Server 2012 with SCVMM WS-B327 Software Defined Networking with WS2012, SC2012 SP1 and Partner Solutions

26 We want to hear from you! Evaluation
Complete your session evaluations today and enter to win prizes daily. Provide your feedback at a CommNet kiosk or log on at Upon submission you will receive instant notification if you have won a prize. Prize pickup is at the Information Desk located in Attendee Services in the Mandalay Bay Foyer. Entry details can be found on the MMS website.

27 Access MMS Online to view session recordings after the event.
Resources Access MMS Online to view session recordings after the event.

28 Thank you!

29 9/6/2018 8:25 PM © 2013 Microsoft Corporation. All rights reserved. Microsoft, Windows, Windows Vista and other product names are or may be registered trademarks and/or trademarks in the U.S. and/or other countries. The information herein is for informational purposes only and represents the current view of Microsoft Corporation as of the date of this presentation. Because Microsoft must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information provided after the date of this presentation. MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO THE INFORMATION IN THIS PRESENTATION. © 2010 Microsoft Corporation. All rights reserved. Microsoft, Windows, Windows Vista and other product names are or may be registered trademarks and/or trademarks in the U.S. and/or other countries. The information herein is for informational purposes only and represents the current view of Microsoft Corporation as of the date of this presentation. Because Microsoft must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information provided after the date of this presentation. MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO THE INFORMATION IN THIS PRESENTATION.

30 Session Goals Prepare you for the era of software defined networking
TechEd 2012 9/6/2018 8:25 PM Session Goals Prepare you for the era of software defined networking Discuss fabric networking in Virtual Machine Manager for System Center 2012 Preview upcoming networking improvements in Virtual Machine manager for System Center 2012 SP1 © 2012 Microsoft Corporation. All rights reserved. Microsoft, Windows, Windows Vista and other product names are or may be registered trademarks and/or trademarks in the U.S. and/or other countries. The information herein is for informational purposes only and represents the current view of Microsoft Corporation as of the date of this presentation. Because Microsoft must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information provided after the date of this presentation. MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO THE INFORMATION IN THIS PRESENTATION.

31 Virtual Machine Manager 2012 Scenarios
“I want this VM to connect to the Corp network” Answer: Logical Networks “I want to create a template that I can deploy anywhere” Answer: Logical Network Definitions “I want IP addresses assigned automatically” Answer: IP Pools “I want to scale out applications” Answer: Load Balancers

32 Network Management VMM 2012
LOGICAL NETWORKS ADDRESS POOLS LOAD BALANCERS Classify network for VMs to access Map to network topology Allocate to hosts and clouds Allocate a static IP address to VMs from a preconfigured pool Create IP pool as a managed range of IP address assignments Create MAC address pool as a managed range of MAC address assignments Apply settings for load balancer capability in service deployment Control load balancer through vendor provider based on PowerShell Create virtual IP templates consisting of load balancer configuration settings

33 Logical Network A logical abstraction for the type or class of network a VM connects to Examples: PROD Backup Front-end Build Etc… Internet VM to VM Data

34 Network objects Physical network adapter Virtual switch
Logical Network “Corp” Logical network definition “Building 42” 1 - M 1 - M Subnet-VLAN “ /24” “VLAN 5” IP Pool “StaticSrv” “ ” 1 - M Host group “Production” M - M Physical network adapter M - M 1 - M Virtual switch Virtual network adapter 1 - 1

35 Address Pools IP POOLS MAC POOLS VIRTUAL IP POOLS
Assigned to VMs, vNICs, hosts, and virtual IPs (VIP’s) Specified use in VM template creation Checked out at VM creation—assigns static IP in VM Returned on VM deletion Assigned to VMs Specified use in VM template creation Checked out at VM creation—assigned before VM boot Returned on VM deletion Assigned to service tiers that use a load balancer Reserved within IP Pools Assigned to clouds Checked out at service deployment Returned on service deletion

36 Load Balancer Support AUTOMATION SUPPORTED BALANCERS
VIRTUAL IP TEMPLATES Connect to load balancer through hardware provider Assign to clouds, host groups, and logical networks Configure load balancing method and add virtual IP on service deployment F5 BIG-IP Brocade ServerIron ADX Citrix NetScaler Microsoft Network Load Balancer Specifies preconfigured properties for configuring a load balancer at service deployment Specifies load balancing methods—round robin, least connections, fastest response

37 Fabric Configuration Demo

38 PowerShell - Creating a Logical Network
#Create a Logical Network $logicalNetwork = New-SCLogicalNetwork -Name "My Logical Network" #Create a network site $allHostGroups $allHostGroups += Get-SCVMHostGroup “Hosts” $allHostGroups += Get-SCVMHostGroup “Infra” $allSubnetVlan $allSubnetVlan += New-SCSubnetVLan -Subnet " /24" -VLanID 4 $allSubnetVlan += New-SCSubnetVLan -Subnet " /24" -VLanID 3 New-SCLogicalNetworkDefinition -Name "Building 44" -LogicalNetwork $logicalNetwork -VMHostGroup $allHostGroups -SubnetVLan $allSubnetVlan

39 PowerShell – IP Pools #Assume $logicalNetwork and $logicalNetworkDefinition are set $allGateways $allGateways += New-SCDefaultGateway -IPAddress " " -Automatic $allDnsServer $allDnsSuffixes $allWinsServers New-SCStaticIPAddressPool -Name "MyIPPool" -LogicalNetworkDefinition $logicalNetworkDefinition -Subnet " /16" -IPAddressRangeStart " " -IPAddressRangeEnd " " -DefaultGateway $allGateways -DNSServer $allDnsServer -DNSSuffix "" -DNSSearchSuffix $allDnsSuffixes

40 PowerShell – IP Pool Queries
$ippool = Get-SCStaticIPAddressPool "VMTraffic" #Show allocated IP Addresses Get-SCIPAddress -StaticIPAddressPool $ippool | ft -property Address,AssignedToType,State Address AssignedToType State VirtualNetworkAdapter Assigned VirtualNetworkAdapter Assigned VirtualNetworkAdapter UnAssigned VirtualMachine UnAssigned VirtualMachine UnAssigned

41 What’s new in Service Pack 1 Networking Scenarios
TechEd 2012 9/6/2018 8:25 PM What’s new in Service Pack 1 Networking Scenarios Connectivity Capability Multi-tenancy Isolation Mobility Bring your own IP Quality of service (QOS) Security Optimizations Monitors Answer: VM Networks Answer: Logical Switch © 2012 Microsoft Corporation. All rights reserved. Microsoft, Windows, Windows Vista and other product names are or may be registered trademarks and/or trademarks in the U.S. and/or other countries. The information herein is for informational purposes only and represents the current view of Microsoft Corporation as of the date of this presentation. Because Microsoft must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information provided after the date of this presentation. MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO THE INFORMATION IN THIS PRESENTATION.

42 Connectivity VM Networks
Multi-tenancy Owner Sharable - Access list Self service creation by Tenant Admin user role Isolation No isolation Network virtualization VLAN External Bring your own IP Enabled by network virtualization Tenant/Customer IP address space separate from Provider IP address space Mobility vNICs only connect to VM Networks VM Networks are built on logical networks VM Networks span clouds With NV, IP follows VM migration

43 VM Networks No Isolation
Pass-through to Logical Network Maximum of one per Logical network Scenarios: Upgrade Management tools in a VM VM Network No Isolation “mgmt” 1 - 1 Logical Network “Corp” Logical network definition “Building 42” 1 - M IP Pool “StaticSrv” “ ” Subnet-VLAN “ /24” “VLAN 5”

44 Hyper-V Network Virtualization
Blue VM Red VM Blue Network Red Network Virtualization Physical Server Physical Network Server Virtualization Run multiple virtual servers on a physical server Each VM has illusion it is running as a physical server Hyper-V Network Virtualization Run multiple virtual networks on a physical network Each virtual network has illusion it is running as a physical network

45 Virtualize Customer Addresses
Provider Address Space (PA) Virtualization Policy System Center Datacenter Network Host 1 Host 2 Blue Corp Blue Blue Blue Blue Red Corp Red Red Red Red Customer Address Space (CA) Red2 Blue2 Red1 Blue1 CA PA

46 VM Networks Hyper-V Network Virtualization
Default method is to encapsulate packets using NVGRE A VM Network defines a routing domain A routing domain can contain multiple virtual subnets VM Network Net. Virt. “Finance” M- 1 VM Subnet /16 IP Pool (CA) 1 - M Logical Network “Corp” Logical network definition “Building 42” 1 - M IP Pool (PA) “StaticSrv” “ ” Subnet-VLAN “ /24” “VLAN 5”

47 VM Networks Hyper-V Network Virtualization Gateways
VMM will manage and configure gateways for NV Routing gateway VPN gateway

48 VM Networks VLAN One VLAN per VM Network
Uses VLANs from Logical Network Definitions Introducing new Logical Network property for “Not Connected” VM Network VLAN “Finance” M- 1 VM Subnet “ /24” 44 1 - 2 1 - M 1 - 1 Logical Network Not Connected “TenantVLANs” Logical network definition “B42Tenants” 1 - M IP Pool “StaticSrv” “ ” Subnet-VLAN “ /24” “VLAN 44”

49 VM Networks External Isolation is managed by switch extension
VM Networks are imported from extension manager VM Subnet 1 - 2 1 - 1 IP Pool “StaticSrv” “ ” 1 - M VM Network External “Finance” M- 1 Logical Network Not Connected “TenantNets” Logical network definition “B27Tenants” 1 - M

50 VM Networks Demo

51 VM Network Powershell #Create Hyper-V NV VMNetwork
$logicalNetwork = Get-SCLogicalNetwork “MyLN” $vmNetwork = New-SCVMNetwork -Name "MyVMNetwork" -LogicalNetwork $logicalNetwork #Add VMSubnet $subnet = New-SCSubnetVLan -Subnet " /24" $vmSubnet = New-SCVMSubnet -Name "My_ _24" -VMNetwork $vmNetwork -SubnetVLan $subnet #...etc… #Add IP Pool is same cmdlet as with Logical Network New-SCStaticIPAddressPool -Name "MyIPPool" -VMSubnet $vmSubnet -Subnet “ /24" -IPAddressRangeStart “ " -IPAddressRangeEnd " " -DefaultGateway $allGateways -DNSServer $allDnsServer -DNSSuffix "" -DNSSearchSuffix $allDnsSuffixes

52 What’s new in Service Pack 1 Networking Scenarios
TechEd 2012 9/6/2018 8:25 PM What’s new in Service Pack 1 Networking Scenarios Connectivity Multi-tenancy Isolation Mobility Bring your own IP Answer: VM Networks Capability Quality of service (QOS) Security Optimizations Monitors Answer: Logical Switch © 2012 Microsoft Corporation. All rights reserved. Microsoft, Windows, Windows Vista and other product names are or may be registered trademarks and/or trademarks in the U.S. and/or other countries. The information herein is for informational purposes only and represents the current view of Microsoft Corporation as of the date of this presentation. Because Microsoft must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information provided after the date of this presentation. MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO THE INFORMATION IN THIS PRESENTATION.

53 Capability Defines how a network adapter is able to use its connection
Quality of service Security Monitoring Capabilities are provided by Hyper-V Extensible Virtual Switch and extensions

54 Key Tenets for Hyper-V Extensible Switch
Benefit Extensible, not replaceable Added features don’t remove other features Pluggable switch Extensions process all network traffic, including VM-to-VM 1st class citizen of system Live Migration and offloads just work; Extensions work together Open & public API model Large ecosystem of extensions Logo certification and rich OS framework High quality extensions Unified Tracing thru virtual switch Shorter down times

55 Hyper-V Extensible Switch
Extensions are Filters or Windows Filtering Platform Providers Extension state/configuration is unique to each instance of an Extensible Switch on a machine Extension Extension Extension

56 VMM Management of Switch Extensions
CA1 VM1 VMU CA2 VM2 Hardware 3rd Party components VMM Agent VMM Server SCVMM Vendor Plugin Virtualization Root Partition Capture Extension Filtering Extension Forwarding Extension Vendor network mgmt console Physical NIC (SRIOV) Physical NIC (Non SRIOV) Top of rack switch Policy database

57 Extension Manager Integration
Supplies network objects and policy to VMM VMM 3rd Party Extension Manager Provider Vendor network management console Virtual Switch Extension Manager (VSEM) Provider Interface Import: Logical Networks IP Pools VM Networks Port Profiles Policy database 3. Retrieve port Profile policies 2. Set VM Network Port Profile Hyper-V Host

58 Multiple Windows Server 2012 hosts
Physical Host NICs Uplink pNIC1 Uplink pNIC2 Uplink pNIC1 Uplink pNIC2 Uplink pNIC1 Uplink pNIC2 Uplink pNIC1 Uplink pNIC2 Virtual Switch Instances …on Host1 …on Host2 …on Host3 …etc Native Switch Settings Extension1 Native Switch Settings Extension1 Native Switch Settings Extension1 Native Switch Settings Extension1 Extension2 Extension2 Extension2 Extension2 Extension3 Extension3 Extension3 Extension3 VM1 vNIC1 VM2 vNIC1 VM3 vNIC1 VM4 vNIC1 VM5 vNIC1 VM6 vNIC1 vNICs VM Host vNICs Host1 vNIC1 Host1 vNIC2 Host2 vNIC1 Host2 vNIC2 Host3 vNIC1 Host3 vNIC2 Host4 vNIC1 Host4 vNIC2

59 Native Switch Settings
VMM Switch Infrastructure Physical Host NICs Uplink pNIC1 Uplink pNIC2 Uplink pNIC1 Uplink pNIC2 Uplink pNIC1 Uplink pNIC2 Uplink pNIC1 Uplink pNIC2 Logical Switch Native Switch Settings Extension1 Extension2 Extension3 Instances VS …on Host1 …on Host2 …on Host3 …on Host4 VM1 vNIC1 VM2 vNIC1 VM3 vNIC1 VM4 vNIC1 VM5 vNIC1 VM6 vNIC1 vNICs VM Host vNICs Host1 vNIC1 Host1 vNIC2 Host2 vNIC1 Host2 vNIC2 Host3 vNIC1 Host3 vNIC2 Host4 vNIC1 Host4 vNIC2

60 Logical Switch A single logical representation of the virtual switch instances which exist in a group of hosts

61 Logical switch objects
1 - M Physical NIC Logical switch objects 1 - M Uplink Port Profile Set Extension Uplink Port Profile M - M Native Uplink Port Profile M - 1 Switch Extensions “Cisco Nexus 1000v” “InMon sFlow” M - M Logical Switch “B42Switch” Self Service User 1 - 1 Virtual Port Profile Set Extension Virtual Port Profile M - M Native Virtual Port Profile M - 1 1 - M Port Classification “Fast DB” “Web” “Restricted” Cloud vNIC 1 - M

62 Logical switch objects
1 - M Physical NIC Logical switch objects 1 - M Uplink Port Profile Set Native Uplink Port Profile M - 1 Logical Switch “B42Switch” 1 - 1 Virtual Port Profile Set Native Virtual Port Profile M - 1 1 - M Port Classification “Fast DB” “Web” “Restricted” Cloud vNIC 1 - M

63 Logical Switch Demo

64 Windows Server IP Address Management Integration Script
Reports IP Pool utilization from VMM into IPAM Can run on demand or configure as a periodic task Included in the “cd layout” of VMM \scripts\IPAMIntegration.ps1

65 IPAM Script Demo

66 In Review: Session Objectives And Takeaways
Tech Ready 15 9/6/2018 In Review: Session Objectives And Takeaways Logical Networks define physical network VM Networks define VM connectivity Logical Switches define port capability This slide is required. Do NOT delete. This should be the first slide after your Title Slide. This is an important year and we need to arm our attendees with the information they can use to Grow Share! Please ensure that your objectives are SMART (defined below) and that they will enable them to go in and win against the competition to grow share. If you have questions, please contact your Track PM for guidance. We have also posted guidance on writing good objectives, out on the Speaker Portal ( This slide should introduce the session by identifying how this information helps the attendee, partners and customers be more successful. Why is this content important? This slide should call out what’s important about the session (sort of the why should we care, why is this important and how will it help our customers/partners be successful) as well as the key takeaways/objectives associated with the session. Call out what attendees will be able to execute on using the information gained in this session. What will they be able to walk away from this session and execute on with their customers. Good Objectives should be SMART (specific, measurable, achievable, realistic, time-bound). Focus on the key takeaways and why this information is important to the attendee, our partners and our customers. Each session has objectives defined and published on please work with your Track PM to call these out here in the slide deck. If you have questions, please contact your Track PM. See slide 5 in this template for a complete list of Tracks and TPMs. © 2012 Microsoft Corporation. All rights reserved. Microsoft, Windows, Windows Vista and other product names are or may be registered trademarks and/or trademarks in the U.S. and/or other countries. The information herein is for informational purposes only and represents the current view of Microsoft Corporation as of the date of this presentation. Because Microsoft must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information provided after the date of this presentation. MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO THE INFORMATION IN THIS PRESENTATION.


Download ppt "TechReady 16 9/6/2018 Network Management in System Center 2012 SP1 Virtual Machine Manager – Part 2 Greg Cusanza Senior Program Manager, Microsoft WS-B313."

Similar presentations


Ads by Google