1. LED - Why Such Interest? Compact light source Robust
Reliable performance
Long life
LED and Driver from OSRAM
With the first generation of thin-film LED…
…in 2001 OSRAM pioneered thin-film technology. This technology – which makes almost all the light generated in the chip available for use – has given rise to such innovative products as OSTAR® Projection. The new high-flux LED from OSRAM are powerful enough to be used in mini projectors 6

2. What is an LED ?
A light emitting diode (LED) is a solid state electronic
component
An LED produces light by injection luminescence
Individual LED’s are referred to as discrete
Discrete LED’s are mounted on a printed circuit board
PCB for use
LED assemblies for lighting are referred to as LED
modules

3. LED die developments

4. What are the advantages of LEDs?
Safe low voltage operation
A single LED will operate on no more than 3.5V
OSRAM LED modules operate at either 10 or 24V
Design cost reductions
Fit and forget installation
Relaxation of localised heating considerations
Certain safety systems are not required
Cost effective solution
Offers new possibilities
Compact luminaires
More flexible solutions
Full colour mixing possible

5. The real life
Representative lifetime figures based on specific operating conditions
InGaAlP (Indium Gallium Aluminium Phosphide)
Red 150,000hrs
Orange 250,000hrs
Yellow 125,000hrs
InGaN (Indium Gallium Nitride)
Blue/White 50,000 – 60,000hrs (with silicone resin)
Green 50,000 – 60,000hrs

6. The wavelengths

7. A linear solution LINEARlight® module – LM01A
The LINEARlight® module is a basic, solid board module
Supplied in strips:
448mm x 10mm x 5mm containing 32 LEDs = 71 LEDs / metre
PCB can be broken down into sub units 56mm x 10mm with 4 LEDs
Power consumption: 3.2 to 4 Watts / module = 7.1 to 8.9 Watts / metre
Additional lenses can be added

8. Signage solutions BACKlight® – LM03A
Supplied as a chain of 8 cable connected PCBs
30mm x 30mm x 5mm each containing 4 LEDs
PCBs can be separated by cutting the wire links
The PCBs can be arranged in 3D shapes if required
Power consumption 3.2 to 4W per complete module
Depending on spacing between PCBs
module length = 240 to 555mm
Ideal for signage

9. More power for your signs
BACKlight Generation 2
A roll has two LED chains 4.8m long 60 individual
boards with two LEDs each
Colours available:
Super red, red, orange, yellow, green, blue & white
One-time connection with the control gear
reduces installation costs
A special coating is applied to protect against
moisture and condensation
Chain separation gives enhanced flexibility
Optimised for use with OPTOTRONIC®
Ideal for installation in narrow lettering

10. You want more? BACKLIGHT Generation 4
A roll has two LED chains 2.4m long
30 individual boards with four LEDs each
One time connection with control gear reduces
installation costs
A special coating is applied to protect against
moisture and condensation
Chain separation gives enhanced flexibility
Available in red, green, blue and white
Optimised for use with OPTOTRONIC®
Ideal for installation in large, low profile letters

11. OPTOTRONIC® An optimally designed control gear is necessary to operate
LED-modules according to the required features
OPTOTRONIC® guarantees a reliable and optimal
operation of different LED-modules

12. MR11 ? COINlight® modules – CM01E 33mm diameter module
Screw terminals for easy connection
24V operation
CM01E – Vertical emitting with 9 LEDs
Luminous output 0.12 to 2.15lm
Power consumption 1.2 to 1.5 Watts
Ideal for effect lighting

13. An architectural solution
EFFECTlight®
The effect light module incorporates a sophisticated lens design
High intensity narrow beam from an array of 10 LED’s
Modules can be stacked end to end as required
Height - 35 mm
Power consumption to 1.2W
Used as an extremely narrow-beam LED module for lighting effects on facades, walls, columns and arches.

14. Flexibility is the key LINEARlight® flex – LM10A & LM11A
Flexible version of LINEARlight®
Vertical (LM10A) or side emitting (LM11A) versions
Supplied on rolls 8.4m (vertical) and 4.2m (side) long
Self adhesive backing (3M VHB)
Minimum bend radius 20mm
May be bent at 90º (between components) once only to fit into corners
Can be cut with scissors!

15. LINEARlight with Dragon performance
LINEARlight POWER Flex
LINEARlight Flex
POWER Flex
DRAGONtape®
Lumen / LED
2,5 12 25
Lumen / m
179
500
1000
Length [mm]
8400
2800
150
Power [W]
86,3 72
8,4
Ideal for cove lighting and handrail illumination

16. OPTOTRONIC® An optimally designed control gear is necessary to operate
LED-modules according to the required features
OPTOTRONIC® guarantees a reliable and optimal
operation of different LED-modules

17. A colourful solution LINEARlight Colormix Dynamic color change
All LED change color on one LED package and
at the same time
Smallest useable unit 10 LED’s
Module width: 11.5 mm
Module length flexible version: 4 m
Module length rigid version: 450 mm

18. A colourful solution LM01M-RGB module 450 x 12 x 3.5mm:
contains 20 LEDs (50 LEDs / metre)
Divisible into 150mm sections
17 Watts per metre maximum power consumption
160 lumens per metre luminous output
24 Volt operation
Only four connections:
Simple interface to dimmers / controllers using
OSRAM control gear
'One stop' colour mix solution

19. And it’s flexible LINEARlight Colormix Flex– LM10L
The LED module for dynamic colour applications (RGB) on
a flexible pc board material
Dimensions of overall module (L x W x H):
4000 mm x 11.5 mm x 2.2 mm
Smallest unit possible: 10 LED’s
Fully dimmable
Optimal design for OPTOTRONIC® Modules
Adhesive tape
Cutting possible, Connection of several parts: Soldering

20. A new generation LINEARlight Colormix Flex Generation 2
Increased lifetime
Increased colour range
Higher efficiency
Twice as bright for the same power

21. Wallwashing / Effectlighting
Colour control
OT-RGB 3 Channel DIM: each colour separately controllable via
1..10V interface.
RGB-Sequencer: preprogrammed sequence, speed
variable via 1..10V interface.
OT DALI 25/ /24 RGB: DALI controllable device sequences can
be reprogrammed
Wallwashing / Effectlighting

22. It is easy ! OT EASY 60/220-240/24 RGB Power supply dimmer LED module
Mains
Power supply + _ +
– R
– G
– B
dimmer
LED module
240V ~
control

23. It is easy ! Configurable with EASY Light Management System IR sensor
(EASY IR,
EASY IR CI)
Standard
push-button
Mains
IR remote control
(EASY RMC) + W B G R -
LED module
240V ~

24. System enhancement EASY Light Management System
maximum system length with LINEARlight Colormix Flex up to 960 W
LED module
240V ~
MASTER
Up to 16 x OT EASY 60
Y-connector
Mains
SLAVE 1
SLAVE 2
Standard
push-button + W B G R -
LED Module

25. The possibilities are endless
1 x DALI Easy supports 5x300W
packages
Up to 100m of Colormix
Master slave function allows DALI
EASY to control up to 16 packages L N
DALI EASY
24kW Light package
1.6km LINEARlight Colormix Flex

26. High flux devices DRAGONtape® and DRAGONpuck®
                                                   
6xLEDs on self-adhesive tape, which can be separated into single
units
3xLED‘s in 35mm diameter
Easy separation by cutting after each LED sub unit
Connection in series
Electrical connection by soldering of wires
Optics with different reflected beam angles are available as
accessories
Ideal for inground mounted luminaires
Emergency / rescue signs
Backlighting of diffusing glass and plastics

27. With optics ? DRAGONtape® Optics
Additional Optics for beamangles:10°, 30° and 14°x 22°
Easy mounting with an M2 screw
Precise positioning of special Osram lens holder
Dimensions optimized for application with DRAGONtape®
14°x22°
30°
10°
                                                                                 
DRAGONtape®

28. A modular approach 1. 2. 3. LINEARlight-DRAGON
Linear High Power LED-Module with 6 LED GoldenDRAGON®
Superior lumen performance
Available in white and other LED colors
Plug and Play System with feeder an connector
Easy assembly with brackets
Modular system with highly integrated:
1. Lensholder + Lens 2. GoldenDRAGON® on metal core board 3. Heat sink (cooler)
All the parts are also available seperately 3. 2. 1.

29. The real deal COINlight-OSTAR
Circular High Power LED-Spot with 1 OSTAR®
Beamangle: 38°
Operation on 24V DC OPTOTRONIC®
Integrated primary heatsink
Easy connection with integrated leads
4 modules per OT75
In-ground mounted luminaires, wall washing,
cove lighting, direct illumination

30. System Guarantee 3 year SYSTEM Guarantee
Use of OPTOTRONIC units with OSRAM Modules
OSRAM peace of mind for your customer 3