1. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: A Simplified Model for Deposition and Removal of Soot Particles in an Exhaust Gas Recirculation Cooler
J. Eng. Gas Turbines Power. 2015;138(1): doi: /
Figure Legend:
(a) Schematic of the EGR tube cross section and the deposit layer across the cooler and (b) the shell and tube type EGR cooler used in the experiments

2. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: A Simplified Model for Deposition and Removal of Soot Particles in an Exhaust Gas Recirculation Cooler
J. Eng. Gas Turbines Power. 2015;138(1): doi: /
Figure Legend:
Sketch representing impact and rebound of a soot particle

3. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: A Simplified Model for Deposition and Removal of Soot Particles in an Exhaust Gas Recirculation Cooler
J. Eng. Gas Turbines Power. 2015;138(1): doi: /
Figure Legend:
Sticking probability of soot particles with different diameters colliding with a clean surface

4. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: A Simplified Model for Deposition and Removal of Soot Particles in an Exhaust Gas Recirculation Cooler
J. Eng. Gas Turbines Power. 2015;138(1): doi: /
Figure Legend:
Removal of particles from the deposit layer due to (a) shear force and (b) incident particle impact

5. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: A Simplified Model for Deposition and Removal of Soot Particles in an Exhaust Gas Recirculation Cooler
J. Eng. Gas Turbines Power. 2015;138(1): doi: /
Figure Legend:
L the lift force (adapted from Ref. [10]).

6. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: A Simplified Model for Deposition and Removal of Soot Particles in an Exhaust Gas Recirculation Cooler
J. Eng. Gas Turbines Power. 2015;138(1): doi: /
Figure Legend:
Critical velocity versus particle diameter for a tubular EGR cooler with an inner diameter of 10 mm

7. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: A Simplified Model for Deposition and Removal of Soot Particles in an Exhaust Gas Recirculation Cooler
J. Eng. Gas Turbines Power. 2015;138(1): doi: /
Figure Legend:
Comparison of experimental and theoretical fouling resistances for inlet gas velocities of (a) 30 m/s, (b) 40 m/s, (c) 70 m/s, and (d) 130 m/s

8. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: A Simplified Model for Deposition and Removal of Soot Particles in an Exhaust Gas Recirculation Cooler
J. Eng. Gas Turbines Power. 2015;138(1): doi: /
Figure Legend:
Variation of deposition and removal fluxes as a function of time for inlet gas velocities of (a) 30 and 40 m/s and (b) 70 and 130 m/s

9. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: A Simplified Model for Deposition and Removal of Soot Particles in an Exhaust Gas Recirculation Cooler
J. Eng. Gas Turbines Power. 2015;138(1): doi: /
Figure Legend:
Variation of total deposited mass as a function of time for four different gas velocities

10. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: A Simplified Model for Deposition and Removal of Soot Particles in an Exhaust Gas Recirculation Cooler
J. Eng. Gas Turbines Power. 2015;138(1): doi: /
Figure Legend:
Critical velocity versus tube diameter for two different particle sizes

11. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: A Simplified Model for Deposition and Removal of Soot Particles in an Exhaust Gas Recirculation Cooler
J. Eng. Gas Turbines Power. 2015;138(1): doi: /
Figure Legend:
Comparison of total deposited mass in three differently sized EGR coolers for an inlet gas velocity of 30 m/s