1. Linear Momentum
Impulse & Collisions

2. Which has more momentum?

3. What is momentum?
Momentum is a measure of how hard it is to stop or turn a moving object.
What characteristics of an object would make it hard to stop or turn?

4. Calculating Momentum For one particle p = mv
Note that momentum is a vector with the same direction as the velocity!
For a system of multiple particles
p = Σpi --- add up the vectors
The unit of momentum is…
kg m/s or Ns

5. Practice:
A 1180-kg car drives along a city street at 13.4 m/s (~30 mi/h). What is the magnitude of the car’s momentum?

6. Practice
Calculate the momentum of a system composed of a 65- kg sprinter running east at 10 m/s and a 75-kg sprinter running north at 9.5 m/s.

7. Change in Momentum Δp = pf – pi
Like any change, change in momentum is calculated by looking at final and initial momentums.
Δp = pf – pi
Δp: change in momentum
pf: final momentum
pi: initial momentum

8. More Practice
A rubber ball and a bean bag are each dropped. The kg beanbag has a speed of 4 m/s just before it hits the ground. What is its change in momentum when it hits the ground and sticks?

9. Part 2:
The rubber ball has a mass of 0.10 kg, and also has a speed of 4 m/s just before it hits the ground. It hits the ground, deforms as the ground pushes it upward, and bounces back, leaving the surface at a speed of 4 m/s upward. What is its change in momentum?

10. Newton’s 2nd Law (again)
For momentum to change, a force is required
The net force on the object is equal to the change of its momentum over time:
This equals ma if mass remains constant

11. Conservation of Momentum
The falling bean bag took some time to hit the ground. (or the ground took some time to apply a force and stop it) If the total stopping time was 0.2s, what force did the ground apply?

12. Conservation of Momentum
If the falling ball’s contact with the ground lasted 0.4s, what was the force exerted by the ground on the ball?
What force did the ball exert on the ground?

13. Collisions and Impulse
So we said it takes a Force to change momentum…
… but in collisions, the force changes considerably over the course of interaction, so we have to use the average force
Impulse is the product of force and the time interval, which equals the change in momentum

14. Collisions and Impulse
Impulse (J) is the change in momentum
Measured in N•s
Impulse equals the average force multiplied by the time during which it was applied

15. Calculating Impulse
An object experiences a force of N for a time period of 4.39 s. What is the impulse on the object?

16. Using Impulse
An object is traveling along with a velocity of 7.16 m/s. What is its mass if a force of 7.99 N applied for a time period of 6.62 s accelerates it to a velocity of m/s?

17. Impulse on a Graph

18. Conservation of Momentum & Inelastic Collisions

19. Conservation of Momentum
If the resultant external force on a system is zero, then the vector sum of the momentums of the objects will remain constant.
Σ Pbefore = Σ Pafter
External forces: forces coming from outside the system of particles whose momentum is being considered.
External forces change the momentum of the system.
Internal forces: forces arising from interaction of particles within a system.
Internal forces cannot change momentum of the system.

20. External Forces - Golf
The club head exerts an external impulsive force on the ball and changes its momentum.
The acceleration of the ball is greater because its mass is smaller.

21. Internal Forces - Pool
The forces the balls exert on each other are internal and do not change the momentum of the system.
Since the balls have equal masses, the magnitude of their accelerations is equal.

22. Collisions
When two moving objects make contact with each other, they undergo a collision.
Conservation of momentum is used to analyze all collisions.
Newton’s Third Law is also useful. It tells us that the force exerted by body A on body B in a collision is equal and opposite to the force exerted on body B by body A.

23. Collisions Elastic collisions Inelastic collisions
Also called “hard” collisions
No deformation occurs, no kinetic energy lost
Inelastic collisions
Deformation occurs, kinetic energy is lost
Perfectly Inelastic (stick together)
Objects stick together and become one object

24. Perfectly Inelastic Collisions
Simplest type of collisions.
After the collision, there is only one velocity, since there is only one object.
Kinetic energy is lost.
Explosions are the reverse of perfectly inelastic collisions in which kinetic energy is gained!

25. Explosions
When an object separates suddenly, as in an explosion, all forces are internal.
Momentum is therefore conserved in an explosion.
There is also an increase in kinetic energy in an explosion. This comes from a potential energy decrease due to chemical combustion.

26. Practice
A fish moving at 2 m/s swallows a stationary fish which is 1/3 its mass. What is the velocity of the big fish after dinner?

27. More Practice
A car with a mass of 950 kg and a speed of 16 m/s to the east approaches an intersection. A 1300-kg minivan traveling north at 21 m/s approaches the same intersection. The vehicles collide and stick together. What is the resulting velocity of the vehicles after the collision?

28. Momentum
Elastic Collisions

29. Σ Kf = Σ Ki (kinetic energy conservation)
Elastic Collisions
In elastic collisions, there is no deformation of colliding objects, and no change in kinetic energy of the system. Therefore, two basic equations must hold for all elastic collisions
Σ pf = Σ pi (momentum conservation)
Σ Kf = Σ Ki (kinetic energy conservation)

30. Practice
Suppose a 5.0-kg projectile launcher shoots a 209 gram projectile at 350 m/s. What is the recoil velocity of the projectile launcher?

31. Elastic Collisions: Recoil
Guns and cannons “recoil” when fired.
This means the gun or cannon must move backward as it propels the projectile forward.
The recoil is the result of action-reaction force pairs, and is entirely due to internal forces. As the gases from the gunpowder explosion expand, they push the projectile forwards and the gun or cannon backwards.

32. Elastic Collisions in 2-D
Momentum in the x-direction is conserved.
Σ Px (before) = Σ Px (after)
Momentum in the y-direction is conserved.
Σ Py (before) = Σ Py (after)
Treat x and y coordinates independently.
Ignore x when calculating y
Ignore y when calculating x

33. Practice
Calculate velocity of 8-kg ball after the collision.