1. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding
J. Manuf. Sci. Eng. 2016;138(11): doi: /
Figure Legend:
(a) Heat pipe grinding wheel structure: 1—cover plate, 2—wheel component, 3—seal joint, 4—plug, and 5—rubber ring, and (b) manufactured heat pipe grinding wheel

2. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding
J. Manuf. Sci. Eng. 2016;138(11): doi: /
Figure Legend:
Heat transfer principle of heat pipe grinding wheel

3. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding
J. Manuf. Sci. Eng. 2016;138(11): doi: /
Figure Legend:
Experimental system (a): 1—adjustable spot cooler system, 2—supporting frame, 3—test wheel, 4—brush, 5—induction coil, 6—collector ring, 7—filter amplifier, and 8—data acquisition card, and temperature measuring points of test wheel (b)

4. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding
J. Manuf. Sci. Eng. 2016;138(11): doi: /
Figure Legend:
Temperature calibration curve of the thermocouple

5. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding
J. Manuf. Sci. Eng. 2016;138(11): doi: /
Figure Legend:
Thermal signal of Po,e measured in stationary state

6. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding
J. Manuf. Sci. Eng. 2016;138(11): doi: /
Figure Legend:
Comparison between results of test wheel with heat pipe and the one without heat pipe on measured thermal signals of each thermocouple: ((a) and (d)) Po,e, ((b) and (e)) Pi,e, and ((c) and (f)) Pi,c

7. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding
J. Manuf. Sci. Eng. 2016;138(11): doi: /
Figure Legend:
Temperatures of Po,e, Pi,e, and Pi,c under different heat flux inputs and cooling conditions

8. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding
J. Manuf. Sci. Eng. 2016;138(11): doi: /
Figure Legend:
Temperatures of Po,e, Pi,e, and Pi,c under different wheel speeds

9. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding
J. Manuf. Sci. Eng. 2016;138(11): doi: /
Figure Legend:
Temperatures of Po,e, Pi,e, and Pi,c under different liquid film thicknesses at the evaporator

10. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding
J. Manuf. Sci. Eng. 2016;138(11): doi: /
Figure Legend:
Thermocouple configuration for surface grinding

11. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding
J. Manuf. Sci. Eng. 2016;138(11): doi: /
Figure Legend:
Measured signals in dry grinding with two different wheels: (a) grinding wheel without heat pipe and (b) heat pipe grinding wheel

12. Date of download: 12/21/2017
Copyright © ASME. All rights reserved.
From: Investigation on Heat Transfer Performance of Heat Pipe Grinding Wheel in Dry Grinding
J. Manuf. Sci. Eng. 2016;138(11): doi: /
Figure Legend:
Effects of two different wheels on grinding temperatures in dry grinding