1. MODIS Instrument Operations Team (IOT): Bryan Breen & Tony Salerno
PM1 FM1 MODIS SRCA (Aqua, Flight Model 1, Moderate Resolution Imaging Spectroradiometer, Spectroradiometric Calibration Assembly) Spectral Calibration Redesign Command Authorization Meeting (CAM) 2006/111
MODIS Instrument Operations Team (IOT):
Bryan Breen & Tony Salerno

2. FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)
History
2005/208 Future SRCA Activity Plan Published
The PM1 SRCA has two functional and stable 10W Lamps (of the original four)
Viable modes of “n*10W” operations: 10W and 20W
No more 30W
Reduced frequencies at Constant Current (CC) mode
Modify activities for no 30W sequences
Full Radiometric and Full Spatial - new ISC SCSes (simple)
Completed and in use
Full Spectral - use CP Macro 31 (complex)
Details of execution within
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

3. FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)
Description of Events
2006/ Executing New Spectral Calibration
Schedule SRCA Full Spectral Activities (Parts 1-4)
Load New ISC SCSes for SRCA Spectral Part 1 and Part 2
Load New SRCA Spectral Part 1 Macro to MODIS CP
Observe SRCA Spectral Part 1 Activity Execution
Load New SRCA Spectral Part 2 Macro to MODIS CP
Observe SRCA Spectral Part 2 Activity Execution (Finish)
SRCA Spectral Part 3 and 4 Activity Execution (no change)
Load Empty (“no-op”) Macro to MODIS CP
The following pages contain a step by step breakdown of the above listed events, separated into related groups of activities. Contingency procedures for all events are listed in the final table.
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

4. Schedule SRCA Full Spectral
Step
Action
CECIL Procedure
Length
Telemetry
Offline Scheduling - done Wednesday, April 19, 2006 (DOY 2006/109)
1-1
MMS Scheduling of Activities
Parts 1-4 and Setups
N/A
Thursday, April 27, 2006 (DOY 2006/117)
2006/117 11:55:00-11:55:16 MCL MOD_SRCA_SETUP_L1_L4_L5_CC.1
SRCA setup activity using lamps 1, 4, and 5, and in constant current feedback mode
2005/117 11:56:40-12:48:21 MCL MOD_OA22_SRCA_FULL_SPECT_1.2
OA-22: SRCA Full Spectral Calibration Part 1 (20W)
2005/117 17:09:52-17:44:23 MCL MOD_OA22_SRCA_FULL_SPECT_2.2
OA-22: SRCA Full Spectral Calibration Part 2 (20W)
2006/117 18:30:00-18:30:16 MCL MOD_SRCA_SETUP_L1_L4_L5_CC.1
2005/117 18:32:18-19:23:18 MCL MOD_OA22_SRCA_FULL_SPECT_3.1
OA-22: SRCA Full Spectral Calibration Part 3 (10W)
2005/117 20:25:54-21:03:54 MCL MOD_OA22_SRCA_FULL_SPECT_4.1
OA-22: SRCA Full Spectral Calibration Part 4 (10W)
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

5. Load New ISC SCSes FSW Engineer to execute
Step
Action
CECIL Procedure
Length
Telemetry
Contact 1 (2 backups) - Wednesday, April 26, 2006 (DOY 2006/116)
11:39:50-11:59: (12:57:30-13:10:49 AGS, 13:18:31-13:32:39 TDW)
2-1
Load ISC SCS 76
FSW_ISC_LOAD_SCS(76,'PM1_SCS_ISC_76_MOD_OA22_SRCA_FULL_SPECT_1_V2',1,'Y')
02:00
Delta checksums = 0
2-2
Load ISC SCS 77
FSW_ISC_LOAD_SCS(77,'PM1_SCS_ISC_77_MOD_OA22_SRCA_FULL_SPECT_2_V2',1,'Y')
2-3
Set ISC Inhibit 63
FSW_ISC_SET_INHIBIT(63)
01:00
ISC_SS_SCSTMIH32TO63 first LSB to 1
FSW Engineer to execute
Load New ISC SCSes (with Inhibit ID 63) for SRCA Spectral Part 1 and Part 2
Referenced loads delivered in CM on 2006/087
Part 1 = ISC SCS 76
Old = Call MODIS CP Macro 18
New = Call MODIS CP Macro 31, Set ISC Inhibit 63
Part 2 = ISC SCS 77
Old = Call MODIS CP Macro 19
New = Call MODIS CP Macro 31
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

6. Load Part 1 Macro
Step
Action
CECIL Procedure
Length
Telemetry
Contact 2 (1 backup) - Wednesday, April 26, 2006 (DOY 2006/116)
14:00:00-14:15:00 TDE (14:27:49-14:39:47 SGS + 14:35:19-14:46:54 PF1)
3-1
Load Marco 31 Part 1
MOD_MEM_PM_LOAD(‘PM1_MPR_MOD_111_CPM31_SR_SPEC_P1_20W’,475,’N’,’DISABLE’,1,15)
02:30
See below
3-2
Dump Macro 31 Part 1
MOD_MEM_PM_DUMP(‘MACRO_31’,475,0,0,1,15,0)
03:00
3-3
Verify Dump
N/A
~2 hr
Approximate 2 hour break to verify load on ground systems
Load/Dump New SRCA Spectral Part 1 Macro to MODIS CP (15 partitions)
Referenced load delivered in CM on 2006/087
May be performed in Step 2-x backup contacts
No CP/FR Event Messages Indicating Errors (see Appendix A)
MOD_SS_CP_LAST_EVENT
MOD_SS_FR_LAST_EVENT
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

7. Load Part 1 Macro (cont) FSW Engineer to execute Step 3-4
Action
CECIL Procedure
Length
Telemetry
Contact 3 (1 backup) - Wednesday, April 26, 2006 (DOY 2006/116)
16:12:37-16:21:53 GLC (16:30:00-16:41:40 TDW)
3-4
Clear ISC Inhibit 63
FSW_ISC_CLEAR_INHIBIT(63)
01:00
ISC_SS_SCSTMIH32TO63 first LSB to 0
FSW Engineer to execute Step 3-4
Do not execute until MODIS IOT verifies results of Step 3-3
May be performed in Step 2-x or 3-x backup contacts
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

8. Observe Spectral Part 1
Step
Action
CECIL Procedure
Length
Telemetry
Contact 4 - Thursday, April 27, 2006 (DOY 2006/117)
11:52:56-12:05:49 SGS
4-1
MCL SRCA Setup
N/A
MOD_CR_SR_B_ON = ON
MOD_CS_SR_USE_L10WX2 = 9 (b1001)
MOD_CR_SR_SISFB_RAD = CURRENT
4-2
MCL SRCA Spectral Part 1 Start
MOD_SS_CP_MACRO_ON = YES
MOD_SS_CP_MACRO_ID = 31
MOD_CS_SR_LAMPS = WATT20 (b11)
MOD_CR_SR_SISHTR_OFF = ON
MOD_CS_SR_GRAT_STEP = changing
Contact 5 - Thursday, April 27, 2006 (DOY 2006/117)
12:27:00-12:48:20 TDW
4-3
MCL SRCA Spectral Part 1 End
MOD_SS_CP_MACRO_ON = NO
MOD_SS_CP_MACRO_ID = 0
ISC_SS_SCSTMIH32TO63 first LSB to 1
Observe SRCA Spectral Part 1 Activity Execution
MCL SRCA Setup detailed validation - see Appendix B
MCL SRCA Spectral Part 1 End detailed validation - see Appendix C
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

9. Load Part 2 Macro
Step
Action
CECIL Procedure
Length
Telemetry
Contact 6 (1 backup) - Thursday, April 27, 2006 (DOY 2006/117)
13:07:46-13:22:46 TDE (13:40:22-13:52:25 PF1)
5-1
Load Marco 31 Part 2
MOD_MEM_PM_LOAD(‘PM1_MPR_MOD_111_CPM31_SR_SPEC_P2_20W’,804,’N’,’DISABLE’,1,26)
04:20
See below
5-2
Dump Macro 31 Part 2
MOD_MEM_PM_DUMP(‘MACRO_31’,804,0,0,1,26,0)
05:12
5-3
Verify Dump
N/A
~2 hr
Approximate 2 hour break to verify load on ground systems
Load/Dump New SRCA Spectral Part 2 Macro to MODIS CP (26 partitions)
Referenced load delivered in CM on 2006/087
No CP/FR Event Messages Indicating Errors (see Appendix A)
MOD_SS_CP_LAST_EVENT
MOD_SS_FR_LAST_EVENT
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

10. Load Part 2 Macro (cont) FSW Engineer to execute Step 5-4
Action
CECIL Procedure
Length
Telemetry
Contact 7 (2 backups) - Thursday, April 27, 2006 (DOY 2006/117)
15:29:49-15:44: (16:20:31-16:33:59 TDE, 16:54:53-17:03:36 PF1)
5-4
Clear ISC Inhibit 63
FSW_ISC_CLEAR_INHIBIT(63)
01:00
ISC_SS_SCSTMIH32TO63 first LSB to 0
FSW Engineer to execute Step 5-4
Do not execute until MODIS IOT verifies results of Step 5-3
May be performed in Step 5-x backup contacts
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

11. Observe Spectral Part 2
Step
Action
CECIL Procedure
Length
Telemetry
Contact 8 - Thursday, April 27, 2006 (DOY 2006/117)
17:56:56-18:16:56 TDE
6-1
MCL SRCA Spectral Part 2 Start
N/A
MOD_SS_CP_MACRO_ON = YES
MOD_SS_CP_MACRO_ID = 31
MOD_CS_SR_LAMPS = WATT20 (b11)
MOD_CR_SR_SISHTR_OFF = ON
MOD_CS_SR_GRAT_STEP = changing
6-2
MCL SRCA Spectral Part 2 End
MOD_SS_CP_MACRO_ON = NO
MOD_SS_CP_MACRO_ID = 0
MOD_CR_SR_B_ON = OFF
Observe SRCA Spectral Part 2 Activity Execution/Completion
MCL SRCA Spectral Part 2 End detailed validation - see Appendix D
Calibration observation a plus – only need to verify in real time final telemetry states
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

12. Load Empty Macro
Step
Action
CECIL Procedure
Length
Telemetry
Contact 9 (1 backup) - Friday, April 28, 2006 (DOY 2006/118)
13:00:00-13:20: (14:15:19-14:27:29 SGS + 14:23:09-14:35:22 AGS, 14:43:00-15:03:00 171)
7-1
Load Empty Marco 31
MOD_MEM_PM_LOAD(‘PM1_MPR_MOD_111_CPM31_EMPTY’,1024,’N’,’DISABLE’,1,32)
05:20
See below
7-2
Dump Empty Macro 31
MOD_MEM_PM_DUMP(‘MACRO_31’,1024,0,0,1,32,0)
06:24
7-3
Verify Dump
N/A
Load/Dump New Empty (“no-op”) Macro to MODIS CP (32 partitions)
Referenced load delivered in CM on 2006/087
No CP/FR Event Messages Indicating Errors (see Appendix A)
MOD_SS_CP_LAST_EVENT
MOD_SS_FR_LAST_EVENT
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

13. Contingency Procedures
Step
Action
CECIL Procedure
Length
Telemetry
In the event of any memory load/dump problems, halt the current memory transfer before attempting another load/dump.
C-1
Clear last memory load/dump transfer
MOD_MEM_HALT()
01:00
Check for CP and FR event messages:
MOD_SS_CP_LAST_EVENT = xx0B
MOD_SS_FR_LAST_EVENT = xx0A
In the event that Steps 4-1,2,3 (Spectral Part 1) or 6-1,2 (Spectral Part 2) is not executing properly, halt the Macro 31 execution.
Immediately follow up with C-3.
C-2
Halt running macro
MOD_HALT_MACRO()
00:30
MOD_SS_CP_MACRO_ON = NO
MOD_SS_CP_MACRO_ID = 0
In the event that Steps 4-3 (Spectral Part 1) or 6-2 (Spectral Part 2) does not end as expected, set the inhibit to prevent later Spectral Parts from executing.
C-3
Set ISC Inhibit ID 63
FSW_ISC_SET_INHIBIT(63)
ISC_SS_SCSTMIH32TO63 first LSB to 1
In the event that C-2 is run or Steps 4-3 (Spectral Part 1) or 6-2 (Spectral Part 2) does not end as expected, it will probably be necessary to return the SRCA motors to their “home” configurations and turn off the SRCA. Run these *after* Part 4 execution time.
C-4
Return SRCA to “home” and power down SRCA
MOD_SRCA_HOME( parameters dependent on state )
MOD_SRCA_PM_OFF()
variable
Telemetry will match final state in Appendix D
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

14. FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)
Activity Summary
Multiple backup contacts scheduled to ensure steps are capable of being executed within constraining schedules of MCL activities. Contact execution variation possible as noted in previous slides.
1st Contact (2006/116 11:39:50-11:59:50) CR# – Load New ISC SCSes
FSW_ISC_LOAD_SCS(76,'PM1_SCS_ISC_76_MOD_OA22_SRCA_FULL_SPECT_1_V2',1,'Y')
FSW_ISC_LOAD_SCS(77,'PM1_SCS_ISC_77_MOD_OA22_SRCA_FULL_SPECT_2_V2',1,'Y')
FSW_ISC_SET_INHIBIT(63)
2nd Contact (2006/116 14:00:00-14:15:00) CR# – Load Part 1 Macro
MOD_MEM_PM_LOAD(‘PM1_MPR_MOD_111_CPM31_SR_SPEC_P1_20W’,475,’N’,’DISABLE’,1,15)
MOD_MEM_PM_DUMP(‘MACRO_31’,475,0,0,1,15,0)
- after load/dump is verified
3rd Contact (2006/116 16:12:37-16:21:53) CR# – Clear ISC Inhibit 63
FSW_ISC_CLEAR_INHIBIT(63)
4th Contact (2006/117 11:52:56-12:05:49) – Observe Spectral Part 1
No procedures
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

15. Activity Summary (cont)
5th Contact (2006/117 12:27:00-12:48:20) – Observe Spectral Part 1 (cont)
No procedures
6th Contact (2006/117 13:07:46-13:22:46) CR# – Load Part 2 Macro
MOD_MEM_PM_LOAD(‘PM1_MPR_MOD_111_CPM31_SR_SPEC_P2_20W’,804,’N’,’DISABLE’,1,26)
MOD_MEM_PM_DUMP(‘MACRO_31’,804,0,0,1,26,0)
- after load/dump is verified
7th Contact (2006/117 15:29:49-15:44:14) CR# – Clear ISC Inhibit 63
FSW_ISC_CLEAR_INHIBIT(63)
8th Contact (2006/117 17:56:56-18:16:56) – Verify Spectral Part 2 End
9th Contact (2006/118 13:00:00-13:20:00) CR# – Load Empty Macro
MOD_MEM_PM_LOAD(‘PM1_MPR_MOD_111_CPM31_EMPTY’,1024,’N’,’DISABLE’,1,32)
MOD_MEM_PM_DUMP(‘MACRO_31’,1024,0,0,1,32,0)
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

16. FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)
Current Status
Aqua (FM1) MODIS Configuration
B-Side Science Mode (All B-Side Components (PS2, CPB, FRB, SRB, etc…))
B-side BB powered and maintained at 285K
CPB loaded with CP07 to Safe Mode - No FR OFF Command (1 patch)
CPB Macro 31 Empty (1024 “no-op” commands)
CFPA Heater: 83K
SRCA Lamps Status
Functional: 10W#1, 10W#4, 1W#1, 1W#2
Non-Functional: 10W#2, 10W#3
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

17. Summary of Constraints
Need S/C to be in “nominal mode” for all activities
Before DOY 2006/117 MCL approval
The 2 new SCSes must be loaded and…
The First Macro 31 load (“Load 1”)
Must be loaded, dumped, verified, and inhibit cleared
Load 2 window
Between SRCA Spectral Part 1 End and Part 2 Begin
Failure results in Spectral Parts 2-4 not executing
Later “home” and “off” contingencies will be necessary
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

18. FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)
Post Activity Status
Aqua (FM1) MODIS Configuration
B-Side Science Mode (All B-Side Components (PS2, CPB, FRB, SRB, etc…))
B-side BB powered and maintained at 285K
CPB loaded with CP07 to Safe Mode - No FR OFF Command (1 patch)
CPB Macro 31 Empty (1024 “no-op” commands)
CFPA Heater: 83K
SRCA Lamps Status
Functional: 10W#1, 10W#4, 1W#1, 1W#2
Non-Functional: 10W#2, 10W#3
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

19. FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)
Required Products
All nominal procedures have been used extensively on orbit.
FSW_ISC_LOAD_SCS
FSW_ISC_SET_INHIBIT
FSW_ISC_CLEAR_INHIBIT
MOD_MEM_PM_LOAD
MOD_MEM_PM_DUMP
All nominal loads have been inspected, approved, and delivered by CM.
PM1_SCS_ISC_76_MOD_OA22_SRCA_FULL_SPECT_1_V2 (1 partition)
PM1_SCS_ISC_77_MOD_OA22_SRCA_FULL_SPECT_2_V2 (1 partition)
PM1_MPR_MOD_111_CPM31_SR_SPEC_P1_20W (15 partitions)
PM1_MPR_MOD_111_CPM31_SR_SPEC_P2_20W (26 partitions)
PM1_MPR_MOD_111_CPM31_EMPTY (32 partitions)
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

20. FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)
Contingency Products
All contingency procedures have been tested/used on orbit.
FSW_ISC_SET_INHIBIT
MOD_HALT_MACRO
MOD_MEM_HALT
MOD_SRCA_HOME
MOD_SRCA_PM_OFF
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

21. Analysis Requirements
Real-time plots, tables, and pages will be analyzed
Required to determine successful CP Macro Load/Dump
Required to determine correct SRCA Spectral Activity start/end
Historical plots and tables will be analyzed
“OPS”, “RBD”, and “EPDS” history data will be collected after the contacts
Required to determine complete SRCA Spectral Activity performance
Details of telemetry to observe outlined in Appendices A-D
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

22. Contingency Operations
Loads/Dumps may be repeated if non-critical anomaly occurs
No/Zero “delta-checksums” for ISC SCS Loads
MODIS Loads are non-destructive
Out Of Limit Observations on MODIS Telemetry
Red OOL
Halt activity operations
execute standard RL Response sequence
Yellow OOL
None anticipated
Query MODIS IOT for direction
Continuance based on particular OOL
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

23. Contingency Ops (cont)
Macro Halted or Incomplete Part of Calibration
The SRCA may be left out of its “home” and off state
The MOD_SRCA_HOME procedure requires careful planning for its parameters.
Extensive detail available inside the procedure’s preamble comments
consult its directions prior to usage
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

24. FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)
Appendix A
Control Processor (CP) and Formatter (FR) error messages related to memory loads and dumps:
MOD_SS_CP_LAST_EVENT messages signaling problems
During a LOAD
xx01, xx03, xx06, xx07, xx08, xx09, xx0A, xx0B
During a DUMP
xx02, xx03, xx04, xx05, xx0B
MOD_SS_FR_LAST_EVENT messages signaling problems
xx01, xx03, xx05, xx06, xx07, xx09, xx0A
xx02, xx03, xx04, xx08, xx0A
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

25. FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)
Appendix B
FM1 SRCA Configuration after scheduled MCL setup
MOD_SRCA_SETUP_L1_L4_L5_CC
Use Lamps 1, 4, and 5 in Constant Current mode
10W #1, 10W #4, 1W #1, respectively
MOD_CR_SR_B_ON = ON
MOD_CR_SR_SISFB_RAD = CURRENT
MOD_CS_SR_USE_L10WX1 = 8 (b1000)
MOD_CS_SR_USE_L10WX2 = 9 (b1001)
MOD_CS_SR_USE_L1WX1 = 2 (b10)
MOD_CS_SR_LAMPS = OFF (b00)
MOD_CR_SR_IR_SRC_OFF = OFF
MOD_CR_SR_SISHTR_OFF = OFF
MOD_CR_SR_L_SHDN_ENA = ENABLED
MOD_CR_SR_SLIT_HOMEB = HOME
MOD_CS_SR_SLIT_STEP = 24
MOD_CR_SR_WHL_HOMEB = HOME
MOD_CS_SR_SRCWH_STEP = 20
MOD_CR_SR_GRAT_FH_B = HOME
MOD_CR_SR_GRAT_CH_B = HOME
MOD_CS_SR_GRAT_STEP = 0
MOD_CR_SR_LAMPS_LOW = HIGH
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

26. FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)
Appendix C
FM1 SRCA Configuration after scheduled MCL SRCA Full Spectral Calibration Part 1
MOD_OA22_SRCA_FULL_SPECT_1
Calls new SCS 76 which calls CP Macro 31 Load 1
Sets ISC SCS Inhibit ID 63
MOD_CR_SR_B_ON = ON
MOD_CR_SR_SISFB_RAD = CURRENT
MOD_CS_SR_USE_L10WX1 = 8 (b1000)
MOD_CS_SR_USE_L10WX2 = 9 (b1001)
MOD_CS_SR_USE_L1WX1 = 2 (b10)
MOD_CS_SR_LAMPS = OFF (b00)
MOD_CR_SR_IR_SRC_OFF = OFF
MOD_CR_SR_SISHTR_OFF = ON
MOD_CR_SR_L_SHDN_ENA = ENABLED
MOD_CR_SR_SLIT_HOMEB = NOT_HOME
MOD_CS_SR_SLIT_STEP = 48
MOD_CR_SR_WHL_HOMEB = NOT_HOME
MOD_CS_SR_SRCWH_STEP = 60
MOD_CR_SR_GRAT_FH_B = NOT_HOME
MOD_CR_SR_GRAT_CH_B = NOT_HOME
MOD_CS_SR_GRAT_STEP = 32112
MOD_CR_SR_LAMPS_LOW = HIGH
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)

27. FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)
Appendix D
FM1 SRCA Configuration after scheduled MCL SRCA Full Spectral Calibration Part 2 (also nominal “off”)
MOD_OA22_SRCA_FULL_SPECT_2
Calls new SCS 77 which calls CP Macro 31 Load 2
MOD_CR_SR_B_ON = OFF
MOD_CR_SR_SISFB_RAD = CURRENT
MOD_CS_SR_USE_L10WX1 = 8 (b1000)
MOD_CS_SR_USE_L10WX2 = 9 (b1001)
MOD_CS_SR_USE_L1WX1 = 2 (b10)
MOD_CS_SR_LAMPS = OFF (b00)
MOD_CR_SR_IR_SRC_OFF = OFF
MOD_CR_SR_SISHTR_OFF = OFF
MOD_CR_SR_L_SHDN_ENA = ENABLED
MOD_CR_SR_SLIT_HOMEB = HOME
MOD_CS_SR_SLIT_STEP = 24
MOD_CR_SR_WHL_HOMEB = HOME
MOD_CS_SR_SRCWH_STEP = 20
MOD_CR_SR_GRAT_FH_B = HOME
MOD_CR_SR_GRAT_CH_B = HOME
MOD_CS_SR_GRAT_STEP = 0
MOD_CR_SR_LAMPS_LOW = HIGH
2006/04/21
FM1 MODIS ("PM1") SRCA Spectral Calibration Redesign CAM (Rev 2)