1. This pupil drew a Solidworks drawing and an isometric drawing by hand
This pupil drew a Solidworks drawing and an isometric drawing by hand. She could have just put the cutting list and notes on the CAD drawing.
These drawings, notes and cutting list enables third party manufacture, which is how this sheet is assessed. That means that another person can make your product accurately using the information that you have provided.

2. Draw a table with the following headings16
Planning:
Draw a table with the following headings
Op. No.
Process
Equipment
Material
Quality
Safety
Time (mins) 1
Complete all Techsoft CAD drawings
Techsoft / Computer
Use grid lock
120 2
Cut front and back panels
Laser cutter
5mm laser ply
Focus laser. Select correct power and speed
Cabinet closed 5
3 etc
Turn aluminium rods
Centre Lathe
15mm diameter aluminium rod
Ensure all rods are tolerance mm
PPE , hair tied back
Fill out the table for the main MAKING processes for your product.
Aim for 10 – 12 rows only.
Name: Form:

3. 16
Planning:
Name: Form:

4. 17
Engineering Drawings
Name: Form:

5. 18
Evidence of Manufacturing:
One or two pages with photographic evidence of the main MAKING tasks that you completed.
Use notes under each photograph to explain;
What tools / processes you are using
What quality issues there are that you are following
Any health and Safety issues.
Name: Form:

6. 19
Testing & Target Market Feedback:
Show your product to your target market / client.
Record their comments. What do they like about the product?
What could be improved? Aim to have two/three points that you can then use as recommendations for improving the design
Test the product. Use photographic evidence.
Actually show it being used.
Show that is meets the design brief and explain how it meets it.
You must have PHOTOGRAPHIC EVIDENCE that this has happened.
Name: Form:

7. 19
Testing & Target Market Feedback:
Testing of the toy is taking place.
The pupil has recorded the results from the testing.
Explained the positive aspects and areas for improvement.
Name: Form:

8. 19
Testing & Target Market Feedback:
Name: Form:

9. 19
Testing & Target Market Feedback:
Name: Form:

10. 20
Evaluation against the Specification and Improvements:
Use your specification document and copy out each one.
Under each specification, explain whether each point has been met / not met (most of them should have been)
Write a sentence to justify how you know.
Specification 5. The ipod dock must project sound up to 5 metres away so that it can be heard in my bedroom.
Yes. I stood at the far side of my bedroom and I could clearly hear the songs being played.
Name: Form:

11. 20
Evaluation against the Specification and Improvements:
Name: Form:

12. Large Scale Manufacturing
Explain what changes you would make (if any) to your design in order to make your product in a large batch.
You should probably use the following keywords and diagrams:
Templates
Jigs
CAD CAM
Buying materials and components in bulk to reduce cost.
If you have used the laser cutter / router / 3d printer etc, then you can state that these machines can produces batches of identical products. Explain the advantages of CAM that we have learnt.
Name: Form:

13. Large Scale Manufacturing
Name: Form: