1. Tutorial: 3-Force Members
Engineering 25
Tutorial: 3-Force Members
Bruce Mayer, PE
Licensed Electrical & Mechanical Engineer

2. Jib Problem
The upper portion of the crane boom consists of the jib AB, which is supported by the pin at A, the guy line BC, and the backstay CD, each cable being separately attached to the mast at C. If the 5-kN load is supported by the hoist line, which passes over the pulley at B, determine the magnitude of the resultant force the pin exerts on the jib at A for equilibrium, the tension in the guy line BC, and the tension T in the hoist line. Neglect the weight of the jib. The pulley at B has a radius of 0.1 m.
H13e P5-44

7. Disk Problem
The smooth disks D and E have a weight of 200 lb and 100 lb, respectively. Determine the largest horizontal force P that can be applied to the center of disk E without causing the disk D to move up the incline.
H13e 5-23

8. NED