1. Carl Washington, Johnnie Chhuoy, Bryan Robles
Emergency Siren
Carl Washington, Johnnie Chhuoy, Bryan Robles

2. Project Description

3. Rationale for Project Selection
The device ensures an open pathway for emergency vehicles to reach its destination.
This project focuses on traffic in high congestion areas where it is difficult to maneuver.
It is used to save the lives of victims at each destination.

4. Project Specifications

5. Project Planning To create a model of varies street inspections
Brainstorm on the project skeletal
Purchase the adequate parts needed
Begin to assemble a prototype street light
Write a program from one intersection
Create multiple street light intersections
Write the code to connect all traffic lights and prepare a simulation of a emergency vehicle

6. Hardware Design

7. Software Design We will use c++ programing to conduct our project
A code will be used to simulate a traffic light performance
We will use a microcontroller and program it to clear a route for an emergency vehicle
A layout of multiple intersections will be simulated on a button panel which will be used to choose the route for the emergency vehicle

8. Linkages and Applications to Society
Creates a safer environment for everyone.
Alternative solution for emergency vehicles and it will aid drivers who are not able to hear sirens .
Less traffic accidents means less automobile repairs and costs

9. Project Resources
Esurance Insurance Company. (n.d.). Retrieved June 12, 2015, from
IEEE 802 Wireless Standards: Fast Reference - Reference from WhatIs.com. (n.d.). Retrieved June 12, 2015, from
WSDOT - Traffic Operations - Traffic Signals. (n.d.). Retrieved June 12, 2015, from

10. Lessons Learned How to manage our time frame Brainstorming Simulation
Conceptual to physical concept
Use C++ programming along side a microcontroller
Circuit building

11. Johnnie Programming Wiring Gathering Materials Testing Blueprints
Troubleshooting

12. Bryan Robles Develop a test plan
Provide input in final product schematic
Solder
Heat shrink
Simulate
Test parts
Work as a team to reach mutual objective

13. Carl Washington Develop a test plan Logbook Status Report
Documentation
Wiring LEDs
Solder & Heat shrink