1. OPERATION & INSTALLATION
TBK-M72SLND Color Indoor Dome Camera
OPERATION & INSTALLATION
FEATURES
IMAGE
DIMENSIONS
DC Iris Level Volume Control
• SONY 1/3” Super HAD Standard-Resolution Color CCD
• Built-in 3.8~9.5mm/F1.2 Vari-Focal DC Auto Iris Lens
• Built-in BLC, AGC and Auto White Balance function
• DC Iris Level Control Volume
• Power : DC12V
INSTALLATION
SPECIFICATIONS
First step : Open the dome with the ring unscrewed.
Second step : There are two mounting holes on the dome base so that users can
install the unit in any place such as on the ceiling, on the wall,
on the fence and etc.
Third step : The mounting in any place connecting the video & power cable,
before connecting please check the below point.
▶ Power supply
1) Adaptor : DC12V/300mA
2) To avoid fire or shock hazard, use a UL listed power supply.
▶ Monitor Impedance
: Set the impedance switch to a 75Ω standard position unless other equipment is
looped out of the monitor.
Fourth step : Adjust the Pan & Tilt of the camera module.
Caution! To avoid smear, do not expose the camera directly to a strong light source
such as the sun or spot light.
Fifth step : Close the dome with the ring screwed.
CABLE CONNECTION
(*) Use regulated & specified power supply.
[ DC12V Type ]