1. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Simultaneous Influence of Static Load and Temperature on the Electromechanical Signature of Piezoelectric Elements Bonded to Composite Aeronautic Structures
J. Vib. Acoust. 2016;138(6): doi: /
Figure Legend:
Experimental equipment: (a) bending load configuration, (b) bending test at −60 °C, and (c) experimental setup overview

2. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Simultaneous Influence of Static Load and Temperature on the Electromechanical Signature of Piezoelectric Elements Bonded to Composite Aeronautic Structures
J. Vib. Acoust. 2016;138(6): doi: /
Figure Legend:
Gradual decoupling of the piezoelectric elements with temperature increase below and above the adhesive glass transition temperature (55 °C): (a) MFC and (b) PZT

3. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Simultaneous Influence of Static Load and Temperature on the Electromechanical Signature of Piezoelectric Elements Bonded to Composite Aeronautic Structures
J. Vib. Acoust. 2016;138(6): doi: /
Figure Legend:
Influence of simulated damages on the RMSD: (a) MFC and (b) PZT

4. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Simultaneous Influence of Static Load and Temperature on the Electromechanical Signature of Piezoelectric Elements Bonded to Composite Aeronautic Structures
J. Vib. Acoust. 2016;138(6): doi: /
Figure Legend:
Coupled influence of bending load and temperature on the RMSD for (a) MFC and (b) PZT. Reference resistance at T=30 °C, and ε/ε0=0 indicated by a black star and a vertical temperature line.

5. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Simultaneous Influence of Static Load and Temperature on the Electromechanical Signature of Piezoelectric Elements Bonded to Composite Aeronautic Structures
J. Vib. Acoust. 2016;138(6): doi: /
Figure Legend:
Coupled influence of bending load and temperature on the static capacity for both piezoelectric elements. The line labeled free corresponds to the case where the piezoelectric elements have not been bonded to their host structure: (a) MFC and (b) PZT.