1. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion
J. Manuf. Sci. Eng. 2010;132(2): doi: /
Figure Legend:
Detached die configuration

2. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion
J. Manuf. Sci. Eng. 2010;132(2): doi: /
Figure Legend:
Schematic of the computational domain for the slot injection chamber configuration (not-to-scale)

3. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion
J. Manuf. Sci. Eng. 2010;132(2): doi: /
Figure Legend:
Injection pressure as a function of fiber volume fraction for an injection slot configuration with detached injection chamber (U=0.0254 m/s, μ=0.75 Pa s, HD=  m, and WD=0.0635 m)

4. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion
J. Manuf. Sci. Eng. 2010;132(2): doi: /
Figure Legend:
CL and chamber wall (DW) axial pressure (gauge) profiles for CR=1.2 at different fiber volume fractions for the slot injection configuration with detached injection chamber

5. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion
J. Manuf. Sci. Eng. 2010;132(2): doi: /
Figure Legend:
CL and chamber wall (DW) axial pressure (gauge) profiles for CR=1.5 at different fiber volume fractions for the slot injection configuration with detached injection chamber

6. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion
J. Manuf. Sci. Eng. 2010;132(2): doi: /
Figure Legend:
CL and chamber wall (DW) axial pressure (gauge) profiles for CR=2.0 at different fiber volume fractions for the slot injection configuration with detached Injection chamber

7. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion
J. Manuf. Sci. Eng. 2010;132(2): doi: /
Figure Legend:
Flow front profile and gauge isopressure (kPa) contours for polyester resin/glass roving and slot injection configuration with detached injection chamber, CR=1.2, U=0.0254 m/s, Vfo=0.595, and μ=0.75 Pa s; slot location is 0.10 m (case 2, not-to-scale)

8. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion
J. Manuf. Sci. Eng. 2010;132(2): doi: /
Figure Legend:
Flow front profile and gauge isopressure (kPa) contours for polyester resin/glass roving and slot injection configuration with detached injection chamber, CR=1.2, U=0.0254 m/s, Vfo=0.64, and μ=0.75 Pa s; slot location is 0.10 m (case 3, not-to-scale)

9. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion
J. Manuf. Sci. Eng. 2010;132(2): doi: /
Figure Legend:
Flow front profile and gauge isopressure (kPa) contours for polyester resin/glass roving and slot injection configuration with detached injection chamber, CR=1.2, U=0.0254 m/s, Vfo=0.724, and μ=0.75 Pa s; slot location is 0.10 m (case 4, not-to-scale)

10. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion
J. Manuf. Sci. Eng. 2010;132(2): doi: /
Figure Legend:
Injection pressure as a function of resin viscosity for an injection slot configuration with detached injection chamber (U=0.0254 m/s, Vfo=0.68, HD=  m, and WD=0.0635 m)

11. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion
J. Manuf. Sci. Eng. 2010;132(2): doi: /
Figure Legend:
CL and chamber wall (DW) axial pressure (gauge) profiles for CR=1.2 at different resin viscosities for the slot injection configuration with detached injection chamber

12. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion
J. Manuf. Sci. Eng. 2010;132(2): doi: /
Figure Legend:
CL and chamber wall (DW) axial pressure (gauge) profiles for CR=1.5 at different resin viscosities for the slot injection configuration with detached injection chamber

13. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion
J. Manuf. Sci. Eng. 2010;132(2): doi: /
Figure Legend:
Flow front profile and gauge Isopressure (kPa) contours for polyester resin/glass roving and slot injection configuration with detached injection chamber, CR=1.2, U=0.0254 m/s, Vfo=0.68, and μ=0.5 Pa s; slot location is 0.1 m (case 5, not-to-scale)

14. Date of download: 12/24/2017
Copyright © ASME. All rights reserved.
From: Impact of Fiber Volume Fraction and Resin Viscosity With Die-Detached Tapered Chamber in Resin Injection Pultrusion
J. Manuf. Sci. Eng. 2010;132(2): doi: /
Figure Legend:
Flow front profile and gauge isopressure (kPa) contours for polyester resin/glass roving and slot injection configuration with detached injection chamber, CR=1.2, U=0.0254 m/s, Vfo=0.68, and μ=1.00 Pa s; slot location is 0.1 m (case 6, not-to-scale)