1. BUILDING MANAGEMENT SYSTEMS(BMS)
Prepared By:
Na’el Hantouli
Sajed Ashqar
Oday Qariab
SUPERVISOR:
Dr.Jamal Kharoosheh .

2. OUTLINES : Introduction Overview Design Arduino Sensors Outputs
Programming
Feasibility study
Conclusion
Recommendations
Testing

3. OUTLINES : Introduction. Overview Design Arduino Sensors Outputs
Programming
Feasibility study
Conclusion
Recommendations
Testing

4. 1- lighting system with digital, analogue and sleep mode control
Introduction :
This project is based on the idea of ​​building a model that simulates practice management systems for buildings . In our presentation the study and the control of the status of each of the following systems will be considered :
1- lighting system with digital, analogue and sleep mode control
2- Gas detection
3- fire alarm detection
4- Control of air conditioning unit

5. OUTLINES : Introduction Overview Design Arduino Sensors Outputs
Programming
Feasibility study
Conclusion
Recommendations
Testing

6. Overview:
BMS is a building equipped with special structured wiring to enable human to remotely control or program an array of automated building electronic devices by entering a single command.

7. Field visits to the work environment
We have built the project based on field visits to the work environment.
1- We have visited the center commercial Nablus Municipality and made the analysis required .
2- We have discussed the effectiveness of the project with engineers and technicians working in this field.

8. Problems and reactions
If there is a gas leak , suction fan and alarm system will work.
If the temperature rose in the work environment to 56 for a time of 1second the suction fan and alarm system will operate .
If increased to 46 for a minute suction fan and alarm system will operate .
The a/c unit will work according to a specific range of temperatures.
If the (automatic on) status of lighting is on, the system will adapt to the environment.

9. OUTLINES : Introduction Overview Design Arduino Sensors Outputs
programming
Feasibility study
Conclusion
Recommendations
Testing

10. Design :

12. OUTLINES : Introduction Overview Design Arduino Sensors Outputs
programming
Feasibility study
Conclusion
Recommendations
Testing

13. Arduino: We used Arduino Uno in our project .
The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs).

14. OUTLINES : Introduction Overview Design Arduino Sensors Outputs
Programming
Feasibility study
Conclusion
Recommendations
Testing

15. Sensors
sensor gas MQ-6(with resistor 20 K ohm)

16. LDR ( 2 LDR and 2 resistors(10Kohm) get used)

17. LM35( 2 LM35 have been used)

18. OUTLINES : Introduction Overview Design Arduino Sensors Outputs
Programming
Feasibility study
Conclusion
Recommendations
Testing

19. Outputs
Buzzer (2 buzzers have been used)

20. Fans:( 2 fans have been used)
1- Absorbed fan has been used(absorb gas leakage)
2- As condition

21. LED array(3 led arrays have been used)

22. The electronic circuit that interface between the arduino (low current device) and high current devices is uln2803
The ULN2803APG / AFWG Series are high − voltage, high− current Darlington drivers comprised of eight NPN Darlington pairs.

23. Outlines Introduction Overview Design Arduino Sensors Outputs
Programming
Feasibility study
Conclusion
Recommendations
Testing

24. Programming Arduino Arduino C language:
The Arduino language is merely a set of C/C functions that can be called from your code.

25. Computer Java Language :
Java is a computer programming language that is concurrent, class-based, object-oriented, and specifically designed to have as few implementation dependencies as possible.

26. Mobile
Android :
Android software development is the process by which new applications are created for the Android operating system. Applications are usually developed in the Java programming language using the Android Software Development Kit, but other development tools are available.

27. Outlines Introduction Overview Design Arduino Sensors Outputs
programming
Feasibility study
Conclusion
Recommendations
Testing

28. Feasibility Study Assessment of the current market
Our project can compete in a global market because we insert the mobile application technique in building management systems .
this provides comfortable control , easy use and also saving time and money .

29. Availability of the items and the parts at the Palestinian market.

30. Strengths and Weaknesses of the product ( BMS ).

31. Strengths
Availability of all of the items at the Palestinian market.
Simplicity of the processes in designing the product.
New product idea at the Palestinian market which provides a large market share.
Ease of use the system.

32. Weaknesses
If we want to apply it in the market we need to do some modifications on the hardware part, and it will be more complex sometimes (according to work the environment).

33. Outlines Introduction Overview Design Arduino Sensors Outputs
programming
Feasibility study
Conclusion
Recommendations
Testing

34. Conclusion
By the end of our project we gained much more experiences in the practical work .
We have learned to think more effectively than before , we also leaned the effective use of sources, Perseverance and challenge . Surely communication skills have been developed significantly .

35. Recommendations
To add another advantage in the project the GSM shield may be used, which makes the system work well via telecommunication when the internet is unavailable .
In a/c control the use of zone control is more efficient in real work environment.

36. Testing

37. THANKS
Any Questions?